[PATCH v5 2/7] sh: ecovec24: add additional properties to the backlight device
From: Bartosz Golaszewski
Date: Sun Oct 06 2019 - 23:32:32 EST
From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
Add a GPIO lookup entry and a device property for GPIO backlight to the
board file. Tie them to the platform device which is now registered using
platform_device_register_full() because of the properties. These changes
are inactive now but will be used once the gpio backlight driver is
modified.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
arch/sh/boards/mach-ecovec24/setup.c | 30 +++++++++++++++++++++++-----
1 file changed, 25 insertions(+), 5 deletions(-)
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c
index acaa97459531..aaa8ea62636f 100644
--- a/arch/sh/boards/mach-ecovec24/setup.c
+++ b/arch/sh/boards/mach-ecovec24/setup.c
@@ -371,6 +371,19 @@ static struct platform_device lcdc_device = {
},
};
+static struct gpiod_lookup_table gpio_backlight_lookup = {
+ .dev_id = "gpio-backlight.0",
+ .table = {
+ GPIO_LOOKUP("sh7724_pfc", GPIO_PTR1, NULL, GPIO_ACTIVE_HIGH),
+ { }
+ },
+};
+
+static struct property_entry gpio_backlight_props[] = {
+ PROPERTY_ENTRY_BOOL("default-on"),
+ { }
+};
+
static struct gpio_backlight_platform_data gpio_backlight_data = {
.fbdev = &lcdc_device.dev,
.gpio = GPIO_PTR1,
@@ -378,13 +391,15 @@ static struct gpio_backlight_platform_data gpio_backlight_data = {
.name = "backlight",
};
-static struct platform_device gpio_backlight_device = {
+static const struct platform_device_info gpio_backlight_device_info = {
.name = "gpio-backlight",
- .dev = {
- .platform_data = &gpio_backlight_data,
- },
+ .data = &gpio_backlight_data,
+ .size_data = sizeof(gpio_backlight_data),
+ .properties = gpio_backlight_props,
};
+static struct platform_device *gpio_backlight_device;
+
/* CEU0 */
static struct ceu_platform_data ceu0_pdata = {
.num_subdevs = 2,
@@ -1006,7 +1021,6 @@ static struct platform_device *ecovec_devices[] __initdata = {
&usb1_common_device,
&usbhs_device,
&lcdc_device,
- &gpio_backlight_device,
&keysc_device,
&cn12_power,
#if defined(CONFIG_MMC_SDHI) || defined(CONFIG_MMC_SDHI_MODULE)
@@ -1462,6 +1476,12 @@ static int __init arch_setup(void)
#endif
#endif
+ gpiod_add_lookup_table(&gpio_backlight_lookup);
+ gpio_backlight_device = platform_device_register_full(
+ &gpio_backlight_device_info);
+ if (IS_ERR(gpio_backlight_device))
+ return PTR_ERR(gpio_backlight_device);
+
return platform_add_devices(ecovec_devices,
ARRAY_SIZE(ecovec_devices));
}
--
2.23.0