[PATCH 0/2] media: meson: vdec: Add compliant H264 support
From: Maxime Jourdan
Date: Mon Oct 07 2019 - 10:59:15 EST
Hello,
This patch series aims to bring H.264 support as well as compliance update
to the amlogic stateful video decoder driver.
There is 1 issue that remains currently:
- The following codepath had to be commented out from v4l2-compliance as
it led to stalling:
if (node->codec_mask & STATEFUL_DECODER) {
struct v4l2_decoder_cmd cmd;
buffer buf_cap(m2m_q);
memset(&cmd, 0, sizeof(cmd));
cmd.cmd = V4L2_DEC_CMD_STOP;
/* No buffers are queued, call STREAMON, then STOP */
fail_on_test(node->streamon(q.g_type()));
fail_on_test(node->streamon(m2m_q.g_type()));
fail_on_test(doioctl(node, VIDIOC_DECODER_CMD, &cmd));
fail_on_test(buf_cap.querybuf(node, 0));
fail_on_test(buf_cap.qbuf(node));
fail_on_test(buf_cap.dqbuf(node));
fail_on_test(!(buf_cap.g_flags() & V4L2_BUF_FLAG_LAST));
for (unsigned p = 0; p < buf_cap.g_num_planes(); p++)
fail_on_test(buf_cap.g_bytesused(p));
fail_on_test(node->streamoff(q.g_type()));
fail_on_test(node->streamoff(m2m_q.g_type()));
/* Call STREAMON, queue one CAPTURE buffer, then STOP */
fail_on_test(node->streamon(q.g_type()));
fail_on_test(node->streamon(m2m_q.g_type()));
fail_on_test(buf_cap.querybuf(node, 0));
fail_on_test(buf_cap.qbuf(node));
fail_on_test(doioctl(node, VIDIOC_DECODER_CMD, &cmd));
fail_on_test(buf_cap.dqbuf(node));
fail_on_test(!(buf_cap.g_flags() & V4L2_BUF_FLAG_LAST));
for (unsigned p = 0; p < buf_cap.g_num_planes(); p++)
fail_on_test(buf_cap.g_bytesused(p));
fail_on_test(node->streamoff(q.g_type()));
fail_on_test(node->streamoff(m2m_q.g_type()));
}
The reason for this is because the driver has a limitation where all
capturebuffers must be queued to the driver before STREAMON is effective.
The firmware needs to know in advance what all the buffers are before
starting to decode.
This limitation is enforced via q->min_buffers_needed.
As such, in this compliance codepath, STREAMON is never actually called
driver-side and there is a stall on fail_on_test(buf_cap.dqbuf(node));
One last detail: V4L2_FMT_FLAG_DYN_RESOLUTION is currently not recognized
by v4l2-compliance, so it was left out for the test. However, it is
present in the patch series.
The second patch has 3 "Alignment should match open parenthesis" lines
where I preferred to keep them that way.
Thanks Stanimir for sharing your HDR file creation tools, this was very
helpful :).
Maxime
# v4l2-compliance --stream-from-hdr test-25fps.h264.hdr -s250
v4l2-compliance SHA: a162244d47d4bb01d0692da879dce5a070f118e7, 64 bits
Compliance test for meson-vdec device /dev/video0:
Driver Info:
Driver name : meson-vdec
Card type : Amlogic Video Decoder
Bus info : platform:meson-vdec
Driver version : 5.4.0
Capabilities : 0x84204000
Video Memory-to-Memory Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04204000
Video Memory-to-Memory Multiplanar
Streaming
Extended Pix Format
Detected Stateful Decoder
Required ioctls:
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second /dev/video0 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 2 Private Controls: 0
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK
Buffer ioctls:
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK (Not Supported)
Test input 0:
Streaming ioctls:
test read/write: OK (Not Supported)
test blocking wait: OK
Video Capture Multiplanar: Captured 250 buffers
test MMAP (select): OK
Video Capture Multiplanar: Captured 250 buffers
test MMAP (epoll): OK
test USERPTR (select): OK (Not Supported)
test DMABUF: Cannot test, specify --expbuf-device
Total for meson-vdec device /dev/video0: 49, Succeeded: 49, Failed: 0, Warnings: 0
Maxime Jourdan (2):
media: meson: vdec: bring up to compliance
media: meson: vdec: add H.264 decoding support
drivers/staging/media/meson/vdec/Makefile | 2 +-
drivers/staging/media/meson/vdec/codec_h264.c | 482 ++++++++++++++++++
drivers/staging/media/meson/vdec/codec_h264.h | 14 +
drivers/staging/media/meson/vdec/esparser.c | 34 +-
drivers/staging/media/meson/vdec/vdec.c | 70 ++-
drivers/staging/media/meson/vdec/vdec.h | 14 +-
.../staging/media/meson/vdec/vdec_helpers.c | 85 ++-
.../staging/media/meson/vdec/vdec_helpers.h | 6 +-
.../staging/media/meson/vdec/vdec_platform.c | 43 ++
9 files changed, 654 insertions(+), 96 deletions(-)
create mode 100644 drivers/staging/media/meson/vdec/codec_h264.c
create mode 100644 drivers/staging/media/meson/vdec/codec_h264.h
--
2.23.0