Re: [PATCH v3 00/14] dmaengine/soc: Add Texas Instruments UDMA support

[Peter Ujfalusi]

Hi Santosh,

On 04/10/2019 19.35, santosh.shilimkar@xxxxxxxxxx wrote:
> On 9/30/19 11:16 PM, Peter Ujfalusi wrote:
>> Hi,
>>
>> Changes since v2
>> )https://patchwork.kernel.org/project/linux-dmaengine/list/?series=152609&state=*)
>>
>> - Based on 5.4-rc1
>> - Support for Flow only data transfer for the glue layer
>>
> 
>>
>> Grygorii Strashko (3):
>> ÂÂ bindings: soc: ti: add documentation for k3 ringacc
>> ÂÂ soc: ti: k3: add navss ringacc driver
>> ÂÂ dmaengine: ti: k3-udma: Add glue layer for non DMAengine users
>>
>> Peter Ujfalusi (11):
>> ÂÂ dmaengine: doc: Add sections for per descriptor metadata support
>> ÂÂ dmaengine: Add metadata_ops for dma_async_tx_descriptor
>> ÂÂ dmaengine: Add support for reporting DMA cached data amount
>> ÂÂ dmaengine: ti: Add cppi5 header for UDMA
>> ÂÂ dt-bindings: dma: ti: Add document for K3 UDMA
>> ÂÂ dmaengine: ti: New driver for K3 UDMA - split#1: defines, structs, io
>> ÂÂÂÂ func
>> ÂÂ dmaengine: ti: New driver for K3 UDMA - split#2: probe/remove, xlate
>> ÂÂÂÂ and filter_fn
>> ÂÂ dmaengine: ti: New driver for K3 UDMA - split#3: alloc/free
>> ÂÂÂÂ chan_resources
>> ÂÂ dmaengine: ti: New driver for K3 UDMA - split#4: dma_device callbacks
>> ÂÂÂÂ 1
>> ÂÂ dmaengine: ti: New driver for K3 UDMA - split#5: dma_device callbacks
>> ÂÂÂÂ 2
>> ÂÂ dmaengine: ti: New driver for K3 UDMA - split#6: Kconfig and Makefile
>>
>> Â .../devicetree/bindings/dma/ti/k3-udma.txtÂÂÂ |Â 185 +
>> Â .../devicetree/bindings/soc/ti/k3-ringacc.txt |ÂÂ 59 +
>> Â Documentation/driver-api/dmaengine/client.rst |ÂÂ 75 +
>> Â .../driver-api/dmaengine/provider.rstÂÂÂÂÂÂÂÂ |ÂÂ 46 +
>> Â drivers/dma/dmaengine.cÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂ 73 +
>> Â drivers/dma/dmaengine.hÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂ 8 +
>> Â drivers/dma/ti/KconfigÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂ 22 +
>> Â drivers/dma/ti/MakefileÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂ 2 +
>> Â drivers/dma/ti/k3-udma-glue.cÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ | 1225 ++++++
>> Â drivers/dma/ti/k3-udma-private.cÂÂÂÂÂÂÂÂÂÂÂÂÂ |Â 141 +
>> Â drivers/dma/ti/k3-udma.cÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ | 3525 +++++++++++++++++
>> Â drivers/dma/ti/k3-udma.hÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |Â 161 +
>> Â drivers/soc/ti/KconfigÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂ 12 +
>> Â drivers/soc/ti/MakefileÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂÂ 1 +
>> Â drivers/soc/ti/k3-ringacc.cÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ | 1165 ++++++
>> Â include/dt-bindings/dma/k3-udma.hÂÂÂÂÂÂÂÂÂÂÂÂ |ÂÂ 10 +
>> Â include/linux/dma/k3-udma-glue.hÂÂÂÂÂÂÂÂÂÂÂÂÂ |Â 134 +
>> Â include/linux/dma/ti-cppi5.hÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ | 1049 +++++
>> Â include/linux/dmaengine.hÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂÂ |Â 110 +
>> Â include/linux/soc/ti/k3-ringacc.hÂÂÂÂÂÂÂÂÂÂÂÂ |Â 245 ++
>> Â 20 files changed, 8248 insertions(+)
>> Â create mode 100644 Documentation/devicetree/bindings/dma/ti/k3-udma.txt
>> Â create mode 100644
>> Documentation/devicetree/bindings/soc/ti/k3-ringacc.txt
>> Â create mode 100644 drivers/dma/ti/k3-udma-glue.c
>> Â create mode 100644 drivers/dma/ti/k3-udma-private.c
>> Â create mode 100644 drivers/dma/ti/k3-udma.c
>> Â create mode 100644 drivers/dma/ti/k3-udma.h
>> Â create mode 100644 drivers/soc/ti/k3-ringacc.c
>> Â create mode 100644 include/dt-bindings/dma/k3-udma.h
>> Â create mode 100644 include/linux/dma/k3-udma-glue.h
>> Â create mode 100644 include/linux/dma/ti-cppi5.h
>> Â create mode 100644 include/linux/soc/ti/k3-ringacc.h
>>
> Can you please split this series and post drivers/soc/* bits
> separately ? If its ready, I can apply k3-ringacc.c changes.

I'll wait couple of days for guys to check the series, then I can send
the split out ringacc patches separately.

- PÃter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki