Re: [PATCH v2 for 5.4 2/4] media: hantro: Fix H264 max frmsize supported on RK3288

[Tomasz Figa]

On Tue, Oct 8, 2019 at 10:35 PM Tomasz Figa <tfiga@xxxxxxxxxxxx> wrote:
>
> On Tue, Oct 8, 2019 at 7:42 PM Tomasz Figa <tfiga@xxxxxxxxxxxx> wrote:
> >
> > On Tue, Oct 8, 2019 at 3:31 PM Jonas Karlman <jonas@xxxxxxxxx> wrote:
> > >
> > > On 2019-10-08 07:27, Tomasz Figa wrote:
> > > > Hi Ezequiel, Jonas,
> > > >
> > > > On Tue, Oct 8, 2019 at 2:46 AM Ezequiel Garcia <ezequiel@xxxxxxxxxxxxx> wrote:
> > > >> From: Jonas Karlman <jonas@xxxxxxxxx>
> > > >>
> > > >> TRM specify supported image size 48x48 to 4096x2304 at step size 16 pixels,
> > > >> change frmsize max_width/max_height to match TRM.
> > > >>
> > > >> Fixes: 760327930e10 ("media: hantro: Enable H264 decoding on rk3288")
> > > >> Signed-off-by: Jonas Karlman <jonas@xxxxxxxxx>
> > > >> ---
> > > >> v2:
> > > >> * No changes.
> > > >>
> > > >>  drivers/staging/media/hantro/rk3288_vpu_hw.c | 4 ++--
> > > >>  1 file changed, 2 insertions(+), 2 deletions(-)
> > > >>
> > > >> diff --git a/drivers/staging/media/hantro/rk3288_vpu_hw.c b/drivers/staging/media/hantro/rk3288_vpu_hw.c
> > > >> index 6bfcc47d1e58..ebb017b8a334 100644
> > > >> --- a/drivers/staging/media/hantro/rk3288_vpu_hw.c
> > > >> +++ b/drivers/staging/media/hantro/rk3288_vpu_hw.c
> > > >> @@ -67,10 +67,10 @@ static const struct hantro_fmt rk3288_vpu_dec_fmts[] = {
> > > >>                 .max_depth = 2,
> > > >>                 .frmsize = {
> > > >>                         .min_width = 48,
> > > >> -                       .max_width = 3840,
> > > >> +                       .max_width = 4096,
> > > >>                         .step_width = H264_MB_DIM,
> > > >>                         .min_height = 48,
> > > >> -                       .max_height = 2160,
> > > >> +                       .max_height = 2304,
> > > > This doesn't match the datasheet I have, which is RK3288 Datasheet Rev
> > > > 1.4 and which has the values as in current code. What's the one you
> > > > got the values from?
> > >
> > > The RK3288 TRM vcodec chapter from [1], unknown revision and date, lists 48x48 to 4096x2304 step size 16 pixels under 25.5.1 H.264 decoder.
> > >
> > > I can also confirm that one of my test samples (PUPPIES BATH IN 4K) is 4096x2304 and can be decoded after this patch.
> > > However the decoding speed is not optimal at 400Mhz, if I recall correctly you need to set the VPU1 clock to 600Mhz for 4K decoding on RK3288.
> > >
> > > I am not sure if I should include a v2 of this patch in my v2 series, as-is this patch do not apply on master (H264_MB_DIM has changed to MB_DIM in master).
> > >
> > > [1] http://www.t-firefly.com/download/firefly-rk3288/docs/TRM/rk3288-chapter-25-video-encoder-decoder-unit-(vcodec).pdf
> >
> > I checked the RK3288 TRM V1.1 too and it refers to 3840x2160@24fps as
> > the maximum.
> >
> > As for performance, we've actually been getting around 33 fps at 400
> > MHz with 3840x2160 on our devices (the old RK3288 Asus Chromebook
> > Flip).
> >
> > I guess we might want to check that with Hantro.
>
> Could you check the value of bits 10:0 in register at 0x0c8? That
> should be the maximum supported stream width in the units of 16
> pixels.

Correction: The unit is 1 pixel and there are additional 2 most
significant bits at 0x0d8, 15:14.

Best regards,
Tomasz