Re: [PATCH] HID: i2c-hid: Remove runtime power management
From: Hans de Goede
Date: Tue Oct 08 2019 - 16:26:03 EST
Hi,
On 08-10-2019 17:38, Kai-Heng Feng wrote:
Runtime power management in i2c-hid brings lots of issues, such as:
- When transitioning from display manager to desktop session, i2c-hid
was closed and opened, so the device was set to SLEEP and ON in a short
period. Vendors confirmed that their devices can't handle fast ON/SLEEP
command because Windows doesn't have this behavior.
- When rebooting, i2c-hid was closed, and the driver core put the device
back to full power before shutdown. This behavior also triggers a quick
SLEEP and ON commands that some devices can't handle, renders an
unusable touchpad after reboot.
- Runtime power management is only useful when i2c-hid isn't opened,
i.e. a laptop without desktop session, which isn't that common.
- Most importantly, my power meter reports little to none energy saving
when i2c-hid is runtime suspended.
So let's remove runtime power management since there is no actual
benefit.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
Given all the problems we've been seeing related to runtime pm I agree
that this is probably the best approach:
Acked-by: Hans de Goede <hdegoede@xxxxxxxxxx>
Regards,
Hans
---
drivers/hid/i2c-hid/i2c-hid-core.c | 111 ++---------------------------
1 file changed, 4 insertions(+), 107 deletions(-)
diff --git a/drivers/hid/i2c-hid/i2c-hid-core.c b/drivers/hid/i2c-hid/i2c-hid-core.c
index 2a7c6e33bb1c..5ab4982b3a7b 100644
--- a/drivers/hid/i2c-hid/i2c-hid-core.c
+++ b/drivers/hid/i2c-hid/i2c-hid-core.c
@@ -26,7 +26,6 @@
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/pm.h>
-#include <linux/pm_runtime.h>
#include <linux/device.h>
#include <linux/wait.h>
#include <linux/err.h>
@@ -48,8 +47,6 @@
/* quirks to control the device */
#define I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV BIT(0)
#define I2C_HID_QUIRK_NO_IRQ_AFTER_RESET BIT(1)
-#define I2C_HID_QUIRK_NO_RUNTIME_PM BIT(2)
-#define I2C_HID_QUIRK_DELAY_AFTER_SLEEP BIT(3)
#define I2C_HID_QUIRK_BOGUS_IRQ BIT(4)
/* flags */
@@ -172,14 +169,7 @@ static const struct i2c_hid_quirks {
{ USB_VENDOR_ID_WEIDA, HID_ANY_ID,
I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV },
{ I2C_VENDOR_ID_HANTICK, I2C_PRODUCT_ID_HANTICK_5288,
- I2C_HID_QUIRK_NO_IRQ_AFTER_RESET |
- I2C_HID_QUIRK_NO_RUNTIME_PM },
- { I2C_VENDOR_ID_RAYDIUM, I2C_PRODUCT_ID_RAYDIUM_4B33,
- I2C_HID_QUIRK_DELAY_AFTER_SLEEP },
- { USB_VENDOR_ID_LG, I2C_DEVICE_ID_LG_8001,
- I2C_HID_QUIRK_NO_RUNTIME_PM },
- { I2C_VENDOR_ID_GOODIX, I2C_DEVICE_ID_GOODIX_01F0,
- I2C_HID_QUIRK_NO_RUNTIME_PM },
+ I2C_HID_QUIRK_NO_IRQ_AFTER_RESET },
{ USB_VENDOR_ID_ELAN, HID_ANY_ID,
I2C_HID_QUIRK_BOGUS_IRQ },
{ 0, 0 }
@@ -397,7 +387,6 @@ static int i2c_hid_set_power(struct i2c_client *client, int power_state)
{
struct i2c_hid *ihid = i2c_get_clientdata(client);
int ret;
- unsigned long now, delay;
i2c_hid_dbg(ihid, "%s\n", __func__);
@@ -415,22 +404,9 @@ static int i2c_hid_set_power(struct i2c_client *client, int power_state)
goto set_pwr_exit;
}
- if (ihid->quirks & I2C_HID_QUIRK_DELAY_AFTER_SLEEP &&
- power_state == I2C_HID_PWR_ON) {
- now = jiffies;
- if (time_after(ihid->sleep_delay, now)) {
- delay = jiffies_to_usecs(ihid->sleep_delay - now);
- usleep_range(delay, delay + 1);
- }
- }
-
ret = __i2c_hid_command(client, &hid_set_power_cmd, power_state,
0, NULL, 0, NULL, 0);
- if (ihid->quirks & I2C_HID_QUIRK_DELAY_AFTER_SLEEP &&
- power_state == I2C_HID_PWR_SLEEP)
- ihid->sleep_delay = jiffies + msecs_to_jiffies(20);
-
if (ret)
dev_err(&client->dev, "failed to change power setting.\n");
@@ -791,11 +767,6 @@ static int i2c_hid_open(struct hid_device *hid)
{
struct i2c_client *client = hid->driver_data;
struct i2c_hid *ihid = i2c_get_clientdata(client);
- int ret = 0;
-
- ret = pm_runtime_get_sync(&client->dev);
- if (ret < 0)
- return ret;
set_bit(I2C_HID_STARTED, &ihid->flags);
return 0;
@@ -807,27 +778,6 @@ static void i2c_hid_close(struct hid_device *hid)
struct i2c_hid *ihid = i2c_get_clientdata(client);
clear_bit(I2C_HID_STARTED, &ihid->flags);
-
- /* Save some power */
- pm_runtime_put(&client->dev);
-}
-
-static int i2c_hid_power(struct hid_device *hid, int lvl)
-{
- struct i2c_client *client = hid->driver_data;
- struct i2c_hid *ihid = i2c_get_clientdata(client);
-
- i2c_hid_dbg(ihid, "%s lvl:%d\n", __func__, lvl);
-
- switch (lvl) {
- case PM_HINT_FULLON:
- pm_runtime_get_sync(&client->dev);
- break;
- case PM_HINT_NORMAL:
- pm_runtime_put(&client->dev);
- break;
- }
- return 0;
}
struct hid_ll_driver i2c_hid_ll_driver = {
@@ -836,7 +786,6 @@ struct hid_ll_driver i2c_hid_ll_driver = {
.stop = i2c_hid_stop,
.open = i2c_hid_open,
.close = i2c_hid_close,
- .power = i2c_hid_power,
.output_report = i2c_hid_output_report,
.raw_request = i2c_hid_raw_request,
};
@@ -1104,9 +1053,6 @@ static int i2c_hid_probe(struct i2c_client *client,
i2c_hid_acpi_fix_up_power(&client->dev);
- pm_runtime_get_noresume(&client->dev);
- pm_runtime_set_active(&client->dev);
- pm_runtime_enable(&client->dev);
device_enable_async_suspend(&client->dev);
/* Make sure there is something at this address */
@@ -1154,9 +1100,6 @@ static int i2c_hid_probe(struct i2c_client *client,
goto err_mem_free;
}
- if (!(ihid->quirks & I2C_HID_QUIRK_NO_RUNTIME_PM))
- pm_runtime_put(&client->dev);
-
return 0;
err_mem_free:
@@ -1166,9 +1109,6 @@ static int i2c_hid_probe(struct i2c_client *client,
free_irq(client->irq, ihid);
err_pm:
- pm_runtime_put_noidle(&client->dev);
- pm_runtime_disable(&client->dev);
-
err_regulator:
regulator_bulk_disable(ARRAY_SIZE(ihid->pdata.supplies),
ihid->pdata.supplies);
@@ -1181,12 +1121,6 @@ static int i2c_hid_remove(struct i2c_client *client)
struct i2c_hid *ihid = i2c_get_clientdata(client);
struct hid_device *hid;
- if (!(ihid->quirks & I2C_HID_QUIRK_NO_RUNTIME_PM))
- pm_runtime_get_sync(&client->dev);
- pm_runtime_disable(&client->dev);
- pm_runtime_set_suspended(&client->dev);
- pm_runtime_put_noidle(&client->dev);
-
hid = ihid->hid;
hid_destroy_device(hid);
@@ -1219,25 +1153,15 @@ static int i2c_hid_suspend(struct device *dev)
int wake_status;
if (hid->driver && hid->driver->suspend) {
- /*
- * Wake up the device so that IO issues in
- * HID driver's suspend code can succeed.
- */
- ret = pm_runtime_resume(dev);
- if (ret < 0)
- return ret;
-
ret = hid->driver->suspend(hid, PMSG_SUSPEND);
if (ret < 0)
return ret;
}
- if (!pm_runtime_suspended(dev)) {
- /* Save some power */
- i2c_hid_set_power(client, I2C_HID_PWR_SLEEP);
+ /* Save some power */
+ i2c_hid_set_power(client, I2C_HID_PWR_SLEEP);
- disable_irq(client->irq);
- }
+ disable_irq(client->irq);
if (device_may_wakeup(&client->dev)) {
wake_status = enable_irq_wake(client->irq);
@@ -1279,11 +1203,6 @@ static int i2c_hid_resume(struct device *dev)
wake_status);
}
- /* We'll resume to full power */
- pm_runtime_disable(dev);
- pm_runtime_set_active(dev);
- pm_runtime_enable(dev);
-
enable_irq(client->irq);
/* Instead of resetting device, simply powers the device on. This
@@ -1304,30 +1223,8 @@ static int i2c_hid_resume(struct device *dev)
}
#endif
-#ifdef CONFIG_PM
-static int i2c_hid_runtime_suspend(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
-
- i2c_hid_set_power(client, I2C_HID_PWR_SLEEP);
- disable_irq(client->irq);
- return 0;
-}
-
-static int i2c_hid_runtime_resume(struct device *dev)
-{
- struct i2c_client *client = to_i2c_client(dev);
-
- enable_irq(client->irq);
- i2c_hid_set_power(client, I2C_HID_PWR_ON);
- return 0;
-}
-#endif
-
static const struct dev_pm_ops i2c_hid_pm = {
SET_SYSTEM_SLEEP_PM_OPS(i2c_hid_suspend, i2c_hid_resume)
- SET_RUNTIME_PM_OPS(i2c_hid_runtime_suspend, i2c_hid_runtime_resume,
- NULL)
};
static const struct i2c_device_id i2c_hid_id_table[] = {