Re: [RFC v5 4/6] sched/fair: Tune task wake-up logic to pack small background tasks on fewer cores
From: Parth Shah
Date: Wed Oct 09 2019 - 04:47:12 EST
On 10/8/19 9:50 PM, Vincent Guittot wrote:
> On Mon, 7 Oct 2019 at 18:54, Parth Shah <parth@xxxxxxxxxxxxx> wrote:
>>
>>
>>
>> On 10/7/19 5:49 PM, Vincent Guittot wrote:
>>> On Mon, 7 Oct 2019 at 10:31, Parth Shah <parth@xxxxxxxxxxxxx> wrote:
>>>>
>>>> The algorithm finds the first non idle core in the system and tries to
>>>> place a task in the idle CPU in the chosen core. To maintain
>>>> cache hotness, work of finding non idle core starts from the prev_cpu,
>>>> which also reduces task ping-pong behaviour inside of the core.
>>>>
>>>> Define a new method to select_non_idle_core which keep tracks of the idle
>>>> and non-idle CPUs in the core and based on the heuristics determines if the
>>>> core is sufficiently busy to place the incoming backgroung task. The
>>>> heuristic further defines the non-idle CPU into either busy (>12.5% util)
>>>> CPU and overutilized (>80% util) CPU.
>>>> - The core containing more idle CPUs and no busy CPUs is not selected for
>>>> packing
>>>> - The core if contains more than 1 overutilized CPUs are exempted from
>>>> task packing
>>>> - Pack if there is atleast one busy CPU and overutilized CPUs count is <2
>>>>
>>>> Value of 12.5% utilization for busy CPU gives sufficient heuristics for CPU
>>>> doing enough work and not become idle in nearby timeframe.
>>>>
>>>> Signed-off-by: Parth Shah <parth@xxxxxxxxxxxxx>
>>>> ---
>>>> kernel/sched/core.c | 3 ++
>>>> kernel/sched/fair.c | 95 ++++++++++++++++++++++++++++++++++++++++++++-
>>>> 2 files changed, 97 insertions(+), 1 deletion(-)
>>>>
>>>> diff --git a/kernel/sched/core.c b/kernel/sched/core.c
>>>> index 6e1ae8046fe0..7e3aff59540a 100644
>>>> --- a/kernel/sched/core.c
>>>> +++ b/kernel/sched/core.c
>>>> @@ -6402,6 +6402,7 @@ static struct kmem_cache *task_group_cache __read_mostly;
>>>>
>>>> DECLARE_PER_CPU(cpumask_var_t, load_balance_mask);
>>>> DECLARE_PER_CPU(cpumask_var_t, select_idle_mask);
>>>> +DECLARE_PER_CPU(cpumask_var_t, turbo_sched_mask);
>>>>
>>>> void __init sched_init(void)
>>>> {
>>>> @@ -6442,6 +6443,8 @@ void __init sched_init(void)
>>>> cpumask_size(), GFP_KERNEL, cpu_to_node(i));
>>>> per_cpu(select_idle_mask, i) = (cpumask_var_t)kzalloc_node(
>>>> cpumask_size(), GFP_KERNEL, cpu_to_node(i));
>>>> + per_cpu(turbo_sched_mask, i) = (cpumask_var_t)kzalloc_node(
>>>> + cpumask_size(), GFP_KERNEL, cpu_to_node(i));
>>>> }
>>>> #endif /* CONFIG_CPUMASK_OFFSTACK */
>>>>
>>>> diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
>>>> index b798fe7ff7cd..d4a1b6474338 100644
>>>> --- a/kernel/sched/fair.c
>>>> +++ b/kernel/sched/fair.c
>>>> @@ -5353,6 +5353,8 @@ static void dequeue_task_fair(struct rq *rq, struct task_struct *p, int flags)
>>>> /* Working cpumask for: load_balance, load_balance_newidle. */
>>>> DEFINE_PER_CPU(cpumask_var_t, load_balance_mask);
>>>> DEFINE_PER_CPU(cpumask_var_t, select_idle_mask);
>>>> +/* A cpumask to find active cores in the system. */
>>>> +DEFINE_PER_CPU(cpumask_var_t, turbo_sched_mask);
>>>>
>>>> #ifdef CONFIG_NO_HZ_COMMON
>>>>
>>>> @@ -5964,6 +5966,76 @@ static int select_idle_cpu(struct task_struct *p, struct sched_domain *sd, int t
>>>> return cpu;
>>>> }
>>>>
>>>> +#ifdef CONFIG_SCHED_SMT
>>>> +static inline bool is_background_task(struct task_struct *p)
>>>> +{
>>>> + if (p->flags & PF_CAN_BE_PACKED)
>>>> + return true;
>>>> +
>>>> + return false;
>>>> +}
>>>> +
>>>> +#define busyness_threshold (100 >> 3)
>>>> +#define is_cpu_busy(util) ((util) > busyness_threshold)
>>>> +
>>>> +/*
>>>> + * Try to find a non idle core in the system based on few heuristics:
>>>> + * - Keep track of overutilized (>80% util) and busy (>12.5% util) CPUs
>>>> + * - If none CPUs are busy then do not select the core for task packing
>>>> + * - If atleast one CPU is busy then do task packing unless overutilized CPUs
>>>> + * count is < busy/2 CPU count
>>>> + * - Always select idle CPU for task packing
>>>> + */
>>>> +static int select_non_idle_core(struct task_struct *p, int prev_cpu, int target)
>>>> +{
>>>> + struct cpumask *cpus = this_cpu_cpumask_var_ptr(turbo_sched_mask);
>>>> + int iter_cpu, sibling;
>>>> +
>>>> + cpumask_and(cpus, cpu_online_mask, p->cpus_ptr);
>>>> +
>>>> + for_each_cpu_wrap(iter_cpu, cpus, prev_cpu) {
>>>> + int idle_cpu_count = 0, non_idle_cpu_count = 0;
>>>> + int overutil_cpu_count = 0;
>>>> + int busy_cpu_count = 0;
>>>> + int best_cpu = iter_cpu;
>>>> +
>>>> + for_each_cpu(sibling, cpu_smt_mask(iter_cpu)) {
>>>> + __cpumask_clear_cpu(sibling, cpus);
>>>> + if (idle_cpu(iter_cpu)) {
>>>> + idle_cpu_count++;
>>>> + best_cpu = iter_cpu;
>>>> + } else {
>>>> + non_idle_cpu_count++;
>>>> + if (cpu_overutilized(iter_cpu))
>>>> + overutil_cpu_count++;
>>>> + if (is_cpu_busy(cpu_util(iter_cpu)))
>>>> + busy_cpu_count++;
>>>> + }
>>>> + }
>>>> +
>>>> + /*
>>>> + * Pack tasks to this core if
>>>> + * 1. Idle CPU count is higher and atleast one is busy
>>>> + * 2. If idle_cpu_count < non_idle_cpu_count then ideally do
>>>> + * packing but if there are more CPUs overutilized then don't
>>>> + * overload it.
>>>
>>> Could you give details about the rationale behind these conditions ?
>>
>> sure. but first maybe some background is required for busy_cpu.
>> Task packing needs to be done across cores minimizing number of busy cores
>> in the chip. Hence when picking a core for packing a background task it
>> will be good to not select a core which is in deeper idle-states.
>
> Make sense.
> find_idlest_group_cpu() is doing something similar with the help of cpuidle
> Don't you have such information available in your cpuidle driver ?
>
yes that can be done but 12.5% utilization is a derived entity from
resulted from pelt decaying and seems to be a good prediction for a CPU not
going to idle states. whereas...
>>
>> Usually deeper idle states have target_residency >= 10ms which are really
>> power saving states and saved power can be channeled to active cores.
>> A CPU with utilization of 12.5% is most probably not going to those deeper
>> idle states and picking a CPU with >= 12.5% util seems to be a good
>> approximation.
>
> you should better use idle_get_state(rq)
... idle_get_state(rq) is a point in time a value and may not give better
decision capability.>
>>
>>
>> Thank you very much for looking at the patches.
>> Parth
>>
Though 12.5% is an experimental value, it can be backed by some explanation
as stated above. I wish to do task packing on a core which really is busy
and 12.5% is a better prediction indicating that it won't go deep idle in
near future and we can pack it here. Whereas when using idle_get_state(rq),
we might read the rq as busy for the instance we look at it but still
cannot predict future though, right?
Hope that explains to go with 12.5%util but I would be happy to hear your
thoughts on using something generic like the idle_get_state().
>
>>
>> Now going to the _main point_, task packing needs to take care of the
>> following scenarios:
>> 1. Not select a core having all the CPUs idle or <= 12.5% util
>> 2. Do not select a core with 2 or more CPUs overloaded (>=80% util)
>
> Why is it always 2 CPUs ? it seems that you can have 1/2/4/8 CPUs but
> you keep using 2 CPUs as a threshold
I thought of going absolute here because of no good reason but to just
eliminate the computation of counting the online sibling in a core (similar
was done in RFC v4)
But now I think this can be done here by simply adding:
"overutil_cpu_count < (idle_cpu_count + non_idle_cpu_count)/2"
*unless* we can get rid of any of the counter here.
>
>> 3. Select a core even if 1 CPU is overloaded as background tasks are
>> usually short running and spending time for selecting better alternative is
>> not worth the investment here
>> 4. Select a core if at least one CPU is busy (>=12.5% util)
>> 5. On selecting a core, select an idle CPU in it.
>>
>> Hence to satisfy this scenarios for SMT-1/2/4 (POWER9) or 8 (POWER8 has
>> 8-threads per core/ POWER9 has feature to make fake SMT-8), the approach
>> keeps track of idle, non-idle, busy and overloaded CPU count in the core
>> and uses above approach to find _sufficiently_ non-idle core, which seems
>> to be a good heuristics to do task packing without much of regression on
>> CPU intensive threads.
>>
>> So as per the comments in this patch, first point covers tadding he scenario 1 and
>> 4 (if part in the code), and second point covers scenario 2 and 3 (else
>> part in the code).
>>
>>>> + */
>>>> + if (idle_cpu_count > non_idle_cpu_count) {
>>>> + if (busy_cpu_count)
>>>> + return best_cpu;
>>>> + } else {
>>>> + /*
>>>> + * Pack tasks if at max 1 CPU is overutilized
>>>> + */
>>>> + if (overutil_cpu_count < 2)
>>>> + return best_cpu;
>>>> + }
>>>> + }
>>>> +
>>>> + return select_idle_sibling(p, prev_cpu, target);
>>>> +}
>>>> +#endif /* CONFIG_SCHED_SMT */
>>>> +
>>>> /*
>>>> * Try and locate an idle core/thread in the LLC cache domain.
>>>> */
>>>> @@ -6418,6 +6490,23 @@ static int find_energy_efficient_cpu(struct task_struct *p, int prev_cpu)
>>>> return -1;
>>>> }
>>>>
>>>> +#ifdef CONFIG_SCHED_SMT
>>>> +/*
>>>> + * Select all classified background tasks for task packing
>>>> + */
>>>> +static inline int turbosched_select_non_idle_core(struct task_struct *p,
>>>> + int prev_cpu, int target)
>>>> +{
>>>> + return select_non_idle_core(p, prev_cpu, target);
>>>> +}
>>>> +#else
>>>> +static inline int turbosched_select_non_idle_core(struct task_struct *p,
>>>> + int prev_cpu, int target)
>>>> +{
>>>> + return select_idle_sibling(p, prev_cpu, target);
>>>
>>> should be better to make turbosched_select_non_idle_core empty and
>>> make sure that __turbo_sched_enabled is never enabled if
>>> CONFIG_SCHED_SMT is disabled
>>>
>>
>> Totally agreed. I thought keeping like this so as to not have any "#def.."
>> in select_task_rq_fair method.
>> So can I do this by adding a new method like __select_idle_sibling() which
>> will call turbosched_select_non_idle_core() in case of SCHED_SMT present
>> and otherwise will call the regular select_idle_sibling()?
>>
>>>> +}
>>>> +#endif
>>>> +
>>>> /*
>>>> * select_task_rq_fair: Select target runqueue for the waking task in domains
>>>> * that have the 'sd_flag' flag set. In practice, this is SD_BALANCE_WAKE,
>>>> @@ -6483,7 +6572,11 @@ select_task_rq_fair(struct task_struct *p, int prev_cpu, int sd_flag, int wake_f
>>>> } else if (sd_flag & SD_BALANCE_WAKE) { /* XXX always ? */
>>>> /* Fast path */
>>>>
>>>> - new_cpu = select_idle_sibling(p, prev_cpu, new_cpu);
>>>> + if (is_turbosched_enabled() && unlikely(is_background_task(p)))
>>>> + new_cpu = turbosched_select_non_idle_core(p, prev_cpu,
>>>> + new_cpu);
>>>
>>> Could you add turbosched_select_non_idle_core() similarly to
>>> find_energy_efficient_cpu() ?
>>> Add it at the beg select_task_rq_fair()
>>> Return immediately with theCPU if you have found one
>>> Or let the normal path select a CPU if the
>>> turbosched_select_non_idle_core() has not been able to find a suitable
>>> CPU for packing
>>>
>>
>> of course. I can do that.
>> I was just not aware about the effect of wake_affine and so was waiting for
>> such comments to be sure of. Thanks for this.
>> Maybe I can add just below the sched_energy_present(){...} construct giving
>> precedence to EAS? I'm asking this because I remember Patrick telling me to
>> leverage task packing for android as well?
>
> After sched_energy_present(){...} seems to be a good place.
>
> Leveraging task packing for android means that it task pacing should
> collaborate with EAS and find_energy_efficient_cpu()
ok, noted.
Thanks,
Parth
>>>
>>>> + else
>>>> + new_cpu = select_idle_sibling(p, prev_cpu, new_cpu);
>>>>
>>>> if (want_affine)
>>>> current->recent_used_cpu = cpu;
>>>> --
>>>> 2.17.1
>>>>
>>