Re: [PATCH] PCI: endpoint: cast the page number to phys_addr_t

[Kishon Vijay Abraham I]

Hi Alan,

On 07/10/19 11:14 PM, Alan Mikhak wrote:
> On Fri, Oct 4, 2019 at 6:49 PM Alan Mikhak <alan.mikhak@xxxxxxxxxx> wrote:
>>
>> From: Alan Mikhak <alan.mikhak@xxxxxxxxxx>
>>
>> Modify pci_epc_mem_alloc_addr() to cast the variable 'pageno'
>> from type 'int' to 'phys_addr_t' before shifting left. This
>> cast is needed to avoid treating bit 31 of 'pageno' as the
>> sign bit which would otherwise get sign-extended to produce
>> a negative value. When added to the base address of PCI memory
>> space, the negative value would produce an invalid physical
>> address which falls before the start of the PCI memory space.
>>
>> Signed-off-by: Alan Mikhak <alan.mikhak@xxxxxxxxxx>

Thanks for the patch.

The change-log title should start with "capitalized verb"

linux-pci follows certain guidelines listed here

https://lore.kernel.org/r/20171026223701.GA25649@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/

Once that gets fixed
Acked-by: Kishon Vijay Abraham I <kishon@xxxxxx>

>> ---
>>  drivers/pci/endpoint/pci-epc-mem.c | 2 +-
>>  1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/pci/endpoint/pci-epc-mem.c b/drivers/pci/endpoint/pci-epc-mem.c
>> index 2bf8bd1f0563..d2b174ce15de 100644
>> --- a/drivers/pci/endpoint/pci-epc-mem.c
>> +++ b/drivers/pci/endpoint/pci-epc-mem.c
>> @@ -134,7 +134,7 @@ void __iomem *pci_epc_mem_alloc_addr(struct pci_epc *epc,
>>         if (pageno < 0)
>>                 return NULL;
>>
>> -       *phys_addr = mem->phys_base + (pageno << page_shift);
>> +       *phys_addr = mem->phys_base + ((phys_addr_t)pageno << page_shift);
>>         virt_addr = ioremap(*phys_addr, size);
>>         if (!virt_addr)
>>                 bitmap_release_region(mem->bitmap, pageno, order);
>> --
>> 2.7.4
>>
> 
> Hi Kishon,
> 
> This issue was observed when requesting pci_epc_mem_alloc_addr()
> to allocate a region of size 0x40010000ULL (1GB + 64KB) from a
> 128GB PCI address space with page sizes being 64KB. This resulted
> in 'pageno' value of '0x8000' as the first available page in a
> contiguous region for the requested size due to other smaller
> regions having been allocated earlier. With 64KB page sizes,
> the variable 'page_shift' holds a value of 0x10. Shifting 'pageno'
> 16 bits to the left results in an 'int' value whose bit 31 is set.
> 
> [   10.565256] __pci_epc_mem_init: mem size 0x2000000000 page_size 0x10000
> [   10.571613] __pci_epc_mem_init: mem pages 0x200000 bitmap_size
> 0x40000 page_shift 0x10
> 
> PCI memory base 0x2000000000
> PCI memory size 128M 0x2000000000
> page_size 64K 0x10000
> page_shift  16 0x10
> pages 2M 0x200000
> bitmap_size 256K 0x40000
> 
> [  702.050299] pci_epc_mem_alloc_addr: size 0x10000 order 0x0 pageno
> 0x4 virt_add 0xffffffd0047b0000 phys_addr 0x2000040000
> [  702.061424] pci_epc_mem_alloc_addr: size 0x10000 order 0x0 pageno
> 0x5 virt_add 0xffffffd0047d0000 phys_addr 0x2000050000
> [  702.203933] pci_epc_mem_alloc_addr: size 0x40010000 order 0xf
> pageno 0x8000 virt_add 0xffffffd004800000 phys_addr 0x1f80000000
> [  702.216547] Oops - store (or AMO) access fault [#1]
> :::
> [  702.310198] sstatus: 0000000200000120 sbadaddr: ffffffd004804000
> scause: 0000000000000007

Thank you Alan for testing this and sending a patch to fix it.

Cheers
Kishon