[RFC PATCH] ASoC: soc-dapm: Invalidate DAPM path during dapm addition of routes

[Srinivas Kandagatla]

From: Sudheer Papothi <spapothi@xxxxxxxxxxxxxx>

During sound card registration, dapm adds routes of
codec and other component paths, but the invalidation of
the widgets in these paths will happen only when the
sound card is instantiated. As these routes are added
before sound card instantiation, these widgets are
not invalidated until a playback or recording usecase
is started.

Audio playback or recording usecase is not started in
the case of codec loopback. So, if codec loopback is
performed just after soundcard registration, then the
widgets are not powered up as those widgets are not
invalidated, results into codec loopback failure.

Change is to remove the sound card instantiation check
condition in dapm add paths, so widgets get invalidated
whenever they are added.

Signed-off-by: Sudheer Papothi <spapothi@xxxxxxxxxxxxxx>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
---
 sound/soc/soc-dapm.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index b6378f025836..13544f7c850b 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -2862,8 +2862,7 @@ static int snd_soc_dapm_add_path(struct snd_soc_dapm_context *dapm,
 		dapm_mark_dirty(widgets[dir], "Route added");
 	}
 
-	if (dapm->card->instantiated && path->connect)
-		dapm_path_invalidate(path);
+	dapm_path_invalidate(path);
 
 	return 0;
 err:
-- 
2.21.0