[PATCH v12 11/16] ARM: dts: ste-href: Add reg property to the LP5521 channel nodes

From: Dan Murphy
Date: Fri Oct 11 2019 - 09:08:26 EST


Add the reg property to each channel node. This update is
to accomodate the multicolor framework. In addition to the
accomodation this allows the LEDs to be placed on any channel
and allow designs to skip channels as opposed to requiring
sequential order.

Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
CC: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
arch/arm/boot/dts/ste-href.dtsi | 22 ++++++++++++++++------
1 file changed, 16 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi
index 4f6acbd8c040..8a873da102d3 100644
--- a/arch/arm/boot/dts/ste-href.dtsi
+++ b/arch/arm/boot/dts/ste-href.dtsi
@@ -56,16 +56,21 @@
reg = <0x33>;
label = "lp5521_pri";
clock-mode = /bits/ 8 <2>;
- chan0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ chan@0 {
+ reg = <0>;
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
linux,default-trigger = "heartbeat";
};
- chan1 {
+ chan@1 {
+ reg = <1>;
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
};
- chan2 {
+ chan@2 {
+ reg = <2>;
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
};
@@ -75,15 +80,20 @@
reg = <0x34>;
label = "lp5521_sec";
clock-mode = /bits/ 8 <2>;
- chan0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ chan@0 {
+ reg = <0>;
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
};
- chan1 {
+ chan@1 {
+ reg = <1>;
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
};
- chan2 {
+ chan@2 {
+ reg = <2>;
led-cur = /bits/ 8 <0x2f>;
max-cur = /bits/ 8 <0x5f>;
};
--
2.22.0.214.g8dca754b1e