Re: [PATCH v3 2/3] ARM: dts: add Netronix E60K02 board common file

[Rob Herring]

On Fri, Oct 11, 2019 at 09:41:48AM +0200, Andreas Kemnade wrote:
> On Fri, 11 Oct 2019 08:56:09 +0200
> Marco Felsch <m.felsch@xxxxxxxxxxxxxx> wrote:
> 
> > Hi Andreas,
> > 
> > On 19-10-10 21:23, Andreas Kemnade wrote:
> > > The Netronix board E60K02 can be found some several Ebook-Readers,
> > > at least the Kobo Clara HD and the Tolino Shine 3. The board
> > > is equipped with different SoCs requiring different pinmuxes.
> > > 
> > > For now the following peripherals are included:
> > > - LED
> > > - Power Key
> > > - Cover (gpio via hall sensor)
> > > - RC5T619 PMIC (the kernel misses support for rtc and charger
> > >   subdevices).
> > > - Backlight via lm3630a
> > > - Wifi sdio chip detection (mmc-powerseq and stuff)
> > > 
> > > It is based on vendor kernel but heavily reworked due to many
> > > changed bindings.
> > > 
> > > Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>
> > > ---
> > > Changes in v3:
> > > - better led name
> > > - correct memory size
> > > - comments about missing devices
> > > 
> > > Changes in v2:
> > > - reordered, was 1/3
> > > - moved pinmuxes to their actual users, not the parents
> > >   of them
> > > - removed some already-disabled stuff
> > > - minor cleanups  
> > 
> > You won't change the muxing, so a this dtsi can be self contained?
> > 
> So you want me to put a big 
> #if defined(MX6SLL) 

Not sure what the comment meant, but no, don't do this. C defines in dts 
files are for symbolic names for numbers and assembling bitfields and 
that's it.

> [...]
>              pinctrl_i2c1: i2c1grp {
>                         fsl,pins = <
>                                 MX6SLL_PAD_I2C1_SCL__I2C1_SCL    0x4001f8b1
>                                 MX6SLL_PAD_I2C1_SDA__I2C1_SDA    0x4001f8b1
>                         >;
>                 };
> 
> #elif (MX6SL)
> [...]
>                pinctrl_i2c1: i2c1grp {
>                         fsl,pins = <
>                                 MX6SL_PAD_I2C1_SCL__I2C1_SCL     0x4001f8b1
>                                 MX6SL_PAD_I2C1_SDA__I2C1_SDA     0x4001f8b1
>                         >;
>                 };
> 
> #endif
> in the dtsi?
> 
> Regards,
> Andreas