[PATCH v1 3/3] ARM: dts: bcm2711: Enable GENET support for the RPi4

[matthias . bgg]

From: Matthias Brugger <mbrugger@xxxxxxxx>

Enable Gigabit Ethernet support on the Raspberry Pi 4
Model B.

Signed-off-by: Matthias Brugger <mbrugger@xxxxxxxx>

---

 arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 22 ++++++++++++++++++++++
 arch/arm/boot/dts/bcm2711.dtsi        | 18 ++++++++++++++++++
 2 files changed, 40 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index cccc1ccd19be..958553d62670 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -97,6 +97,28 @@
 	status = "okay";
 };
 
+&genet {
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii";
+	status = "okay";
+	dma-burst-sz = <0x08>;
+
+	mdio@e14 {
+		compatible = "brcm,genet-mdio-v5";
+		reg = <0xe14 0x8>;
+		reg-names = "mdio";
+		#address-cells = <0x0>;
+		#size-cells = <0x1>;
+
+		phy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			/* No PHY interrupt */
+			max-speed = <1000>;
+			reg = <0x1>;
+		};
+	};
+};
+
 /* uart0 communicates with the BT module */
 &uart0 {
 	pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index ac83dac2e6ba..e2e837fcad59 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -305,6 +305,24 @@
 			cpu-release-addr = <0x0 0x000000f0>;
 		};
 	};
+
+	scb {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+
+		ranges = <0x0 0x7c000000  0x0 0xfc000000  0x03800000>;
+
+		genet: ethernet@7d580000 {
+			compatible = "brcm,genet-v5";
+			reg = <0x0 0x7d580000 0x10000>;
+			#address-cells = <0x1>;
+			#size-cells = <0x1>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+	};
 };
 
 &clk_osc {
-- 
2.23.0