Re: [PATCH v12 06/16] leds: lp50xx: Add the LP50XX family of the RGB LED driver

[Jacek Anaszewski]

Dan,

On 10/11/19 3:06 PM, Dan Murphy wrote:
> Introduce the LP5036/30/24/18/12/9 RGB LED driver.
> The difference in these parts are the number of
> LED outputs where the:
> 
> LP5036 can control 36 LEDs
> LP5030 can control 30 LEDs
> LP5024 can control 24 LEDs
> LP5018 can control 18 LEDs
> LP5012 can control 12 LEDs
> LP5009 can control 9 LEDs
> 
> The device has the ability to group LED output into control banks
> so that multiple LED banks can be controlled with the same mixing and
> brightness.  Inversely the LEDs can also be controlled independently.
> 
> Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
> ---
>  drivers/leds/Kconfig       |  11 +
>  drivers/leds/Makefile      |   1 +
>  drivers/leds/leds-lp50xx.c | 799 +++++++++++++++++++++++++++++++++++++
>  3 files changed, 811 insertions(+)
>  create mode 100644 drivers/leds/leds-lp50xx.c
> 
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index a1ede89afc9e..fb614a6b9afa 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -363,6 +363,17 @@ config LEDS_LP3952
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called leds-lp3952.
>  
> +config LEDS_LP50XX
> +	tristate "LED Support for TI LP5036/30/24/18/12/9 LED driver chip"
> +	depends on LEDS_CLASS && REGMAP_I2C
> +	depends on LEDS_CLASS_MULTI_COLOR
> +	help
> +	  If you say yes here you get support for the Texas Instruments
> +	  LP5036, LP5030, LP5024, LP5018, LP5012 and LP5009 LED driver.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called leds-lp50xx.
> +
>  config LEDS_LP55XX_COMMON
>  	tristate "Common Driver for TI/National LP5521/5523/55231/5562/8501"
>  	depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562 || LEDS_LP8501
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index 841038cfe35b..7a208a0f7b84 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -34,6 +34,7 @@ obj-$(CONFIG_LEDS_GPIO_REGISTER)	+= leds-gpio-register.o
>  obj-$(CONFIG_LEDS_GPIO)			+= leds-gpio.o
>  obj-$(CONFIG_LEDS_LP3944)		+= leds-lp3944.o
>  obj-$(CONFIG_LEDS_LP3952)		+= leds-lp3952.o
> +obj-$(CONFIG_LEDS_LP50XX)		+= leds-lp50xx.o
>  obj-$(CONFIG_LEDS_LP55XX_COMMON)	+= leds-lp55xx-common.o
>  obj-$(CONFIG_LEDS_LP5521)		+= leds-lp5521.o
>  obj-$(CONFIG_LEDS_LP5523)		+= leds-lp5523.o
> diff --git a/drivers/leds/leds-lp50xx.c b/drivers/leds/leds-lp50xx.c
[...]
> +		fwnode_for_each_child_node(child, led_node) {
> +			ret = fwnode_property_read_u32(led_node, "color",
> +						       &color_id);
> +			if (ret)
> +				dev_err(&priv->client->dev,
> +				"Cannot read color\n");
> +
> +			set_bit(color_id, &led->mc_cdev.available_colors);
> +			num_colors++;
> +
> +		}
> +
> +		led->priv = priv;
> +		led->mc_cdev.num_leds = num_colors;
> +		led->mc_cdev.led_cdev = &led->led_dev;
> +		led->led_dev.brightness_set_blocking = lp50xx_brightness_set;
> +		led->led_dev.brightness_get = lp50xx_brightness_get;
> +		ret = led_classdev_multicolor_register_ext(&priv->client->dev,
> +						       &led->mc_cdev,
> +						       &init_data);

s/led_classdev/devm_led_classdev/

> +		if (ret) {
> +			dev_err(&priv->client->dev, "led register err: %d\n",
> +				ret);
> +			fwnode_handle_put(child);
> +			goto child_out;
> +		}
> +		i++;
> +	}
> +
> +child_out:
> +	return ret;
> +}
> +


-- 
Best regards,
Jacek Anaszewski