[PATCH 6/6 v2] MMC: JZ4740: Add support for LPM.

From: Zhou Yanjie
Date: Sat Oct 12 2019 - 01:19:36 EST


add support for low power mode of Ingenic's MMC/SD Controller.

Signed-off-by: Zhou Yanjie <zhouyanjie@xxxxxxxx>
---
drivers/mmc/host/jz4740_mmc.c | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)

diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
index 44a04fe..4cbe7fb 100644
--- a/drivers/mmc/host/jz4740_mmc.c
+++ b/drivers/mmc/host/jz4740_mmc.c
@@ -43,6 +43,7 @@
#define JZ_REG_MMC_RESP_FIFO 0x34
#define JZ_REG_MMC_RXFIFO 0x38
#define JZ_REG_MMC_TXFIFO 0x3C
+#define JZ_REG_MMC_LPM 0x40
#define JZ_REG_MMC_DMAC 0x44

#define JZ_MMC_STRPCL_EXIT_MULTIPLE BIT(7)
@@ -102,6 +103,12 @@
#define JZ_MMC_DMAC_DMA_SEL BIT(1)
#define JZ_MMC_DMAC_DMA_EN BIT(0)

+#define JZ_MMC_LPM_DRV_RISING BIT(31)
+#define JZ_MMC_LPM_DRV_RISING_QTR_PHASE_DLY BIT(31)
+#define JZ_MMC_LPM_DRV_RISING_1NS_DLY BIT(30)
+#define JZ_MMC_LPM_SMP_RISING_QTR_OR_HALF_PHASE_DLY BIT(29)
+#define JZ_MMC_LPM_LOW_POWER_MODE_EN BIT(0)
+
#define JZ_MMC_CLK_RATE 24000000

enum jz4740_mmc_version {
@@ -860,6 +867,22 @@ static int jz4740_mmc_set_clock_rate(struct jz4740_mmc_host *host, int rate)
}

writew(div, host->base + JZ_REG_MMC_CLKRT);
+
+ if (real_rate > 25000000) {
+ if (host->version >= JZ_MMC_X1000) {
+ writel(JZ_MMC_LPM_DRV_RISING_QTR_PHASE_DLY |
+ JZ_MMC_LPM_SMP_RISING_QTR_OR_HALF_PHASE_DLY |
+ JZ_MMC_LPM_LOW_POWER_MODE_EN,
+ host->base + JZ_REG_MMC_LPM);
+ } else if (host->version >= JZ_MMC_JZ4760) {
+ writel(JZ_MMC_LPM_DRV_RISING |
+ JZ_MMC_LPM_LOW_POWER_MODE_EN,
+ host->base + JZ_REG_MMC_LPM);
+ } else if (host->version >= JZ_MMC_JZ4725B)
+ writel(JZ_MMC_LPM_LOW_POWER_MODE_EN,
+ host->base + JZ_REG_MMC_LPM);
+ }
+
return real_rate;
}

--
2.7.4