RE: [PATCH 1/2] dt-bindings: i2c: replace property i2c-mux-idle-disconnect

[Biwen Li]

Hi Peter, Rob

This patch is a new method for https://lore.kernel.org/patchwork/patch/1132445/

Best Regards,
Biwen Li
> 
> This replaces property i2c-mux-idle-disconnect with idle-state
> 
> Signed-off-by: Biwen Li <biwen.li@xxxxxxx>
> ---
>  Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt | 4 +---
>  1 file changed, 1 insertion(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
> b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
> index 30ac6a60f041..f2db517b1635 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
> +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
> @@ -25,9 +25,7 @@ Required Properties:
>  Optional Properties:
> 
>    - reset-gpios: Reference to the GPIO connected to the reset input.
> -  - i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect
> all
> -    children in idle state. This is necessary for example, if there are several
> -    multiplexers on the bus and the devices behind them use same I2C
> addresses.
> +  - idle-state: Please refer to
> Documentation/devicetree/bindings/mux/mux-controller.txt
>    - interrupts: Interrupt mapping for IRQ.
>    - interrupt-controller: Marks the device node as an interrupt controller.
>    - #interrupt-cells : Should be two.
> --
> 2.17.1