[PATCH] leds: pca963x: Fix open-drain initialization

[Zahari Petkov]

OUTDRV setting (bit 2) of Mode register 2 has a default value of 1.
During initialization when open-drain is used, instead of setting
OUTDRV to 0, the driver keeps it as 1. OUTDRV setting is now correctly
initialized to 0 when open-drain is used.

Additionally the BIT macro is used for improved readibility.

Fixes: bb29b9cccd95 ("leds: pca963x: Add bindings to invert polarity")
Signed-off-by: Zahari Petkov <zahari@xxxxxxxxx>
---
 drivers/leds/leds-pca963x.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/leds/leds-pca963x.c b/drivers/leds/leds-pca963x.c
index 4afc317901a8..e3da2156b385 100644
--- a/drivers/leds/leds-pca963x.c
+++ b/drivers/leds/leds-pca963x.c
@@ -438,12 +438,12 @@ static int pca963x_probe(struct i2c_client *client,
 						    PCA963X_MODE2);
 		/* Configure output: open-drain or totem pole (push-pull) */
 		if (pdata->outdrv == PCA963X_OPEN_DRAIN)
-			mode2 |= 0x01;
+			mode2 &= ~BIT(2);
 		else
-			mode2 |= 0x05;
+			mode2 |= BIT(2);
 		/* Configure direction: normal or inverted */
 		if (pdata->dir == PCA963X_INVERTED)
-			mode2 |= 0x10;
+			mode2 |= BIT(4);
 		i2c_smbus_write_byte_data(pca963x->chip->client, PCA963X_MODE2,
 					  mode2);
 	}
-- 
2.23.0