[PATCH] pwm: sun4i: Fix incorrect calculation of duty_cycle/period

[megous]

From: Ondrej Jirman <megous@xxxxxxxxxx>

Since 5.4-rc1, pwm_apply_state calls ->get_state after ->apply
if available, and this revealed an issue with integer precision
when calculating duty_cycle and period for the currently set
state in ->get_state callback.

This issue manifested in broken backlight on several Allwinner
based devices.

Previously this worked, because ->apply updated the passed state
directly.

Fixes: deb9c462f4e53 ("pwm: sun4i: Don't update the state for the caller of pwm_apply_state")
Signed-off-by: Ondrej Jirman <megous@xxxxxxxxxx>
---
 drivers/pwm/pwm-sun4i.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c
index 6f5840a1a82d..05273725a9ff 100644
--- a/drivers/pwm/pwm-sun4i.c
+++ b/drivers/pwm/pwm-sun4i.c
@@ -137,10 +137,10 @@ static void sun4i_pwm_get_state(struct pwm_chip *chip,
 
 	val = sun4i_pwm_readl(sun4i_pwm, PWM_CH_PRD(pwm->hwpwm));
 
-	tmp = prescaler * NSEC_PER_SEC * PWM_REG_DTY(val);
+	tmp = (u64)prescaler * NSEC_PER_SEC * PWM_REG_DTY(val);
 	state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, clk_rate);
 
-	tmp = prescaler * NSEC_PER_SEC * PWM_REG_PRD(val);
+	tmp = (u64)prescaler * NSEC_PER_SEC * PWM_REG_PRD(val);
 	state->period = DIV_ROUND_CLOSEST_ULL(tmp, clk_rate);
 }
 
-- 
2.23.0