Re: [PATCH] perf cgroups: Don't rotate events for cgroups unnecessarily
From: Ganapatrao Kulkarni
Date: Tue Oct 15 2019 - 00:44:36 EST
Hi Peter,
On Wed, Sep 18, 2019 at 12:51 PM Ganapatrao Kulkarni <gklkml16@xxxxxxxxx> wrote:
>
> On Fri, Aug 23, 2019 at 6:33 PM Peter Zijlstra <peterz@xxxxxxxxxxxxx> wrote:
> >
> > On Fri, Aug 23, 2019 at 06:26:34PM +0530, Ganapatrao Kulkarni wrote:
> > > On Fri, Aug 23, 2019 at 5:29 PM Peter Zijlstra <peterz@xxxxxxxxxxxxx> wrote:
> > > > On Fri, Aug 23, 2019 at 04:13:46PM +0530, Ganapatrao Kulkarni wrote:
> > > >
> > > > > We are seeing regression with our uncore perf driver(Marvell's
> > > > > ThunderX2, ARM64 server platform) on 5.3-Rc1.
> > > > > After bisecting, it turned out to be this patch causing the issue.
> > > >
> > > > Funnily enough; the email you replied to didn't contain a patch.
> > >
> > > Hmm sorry, not sure why the patch is clipped-off, I see it in my inbox.
> >
> > Your email is in a random spot of the discussion for me. At least it was
> > fairly easy to find the related patch.
> >
> > > > > Test case:
> > > > > Load module and run perf for more than 4 events( we have 4 counters,
> > > > > event multiplexing takes place for more than 4 events), then unload
> > > > > module.
> > > > > With this sequence of testing, the system hangs(soft lockup) after 2
> > > > > or 3 iterations. Same test runs for hours on 5.2.
> > > > >
> > > > > while [ 1 ]
> > > > > do
> > > > > rmmod thunderx2_pmu
> > > > > modprobe thunderx2_pmu
> > > > > perf stat -a -e \
> > > > > uncore_dmc_0/cnt_cycles/,\
> > > > > uncore_dmc_0/data_transfers/,\
> > > > > uncore_dmc_0/read_txns/,\
> > > > > uncore_dmc_0/config=0xE/,\
> > > > > uncore_dmc_0/write_txns/ sleep 1
> > > > > sleep 2
> > > > > done
> > > >
> > > > Can you reproduce without the module load+unload? I don't think people
> > > > routinely unload modules.
> > >
> > > The issue wont happen, if module is not unloaded/reloaded.
> > > IMHO, this could be potential bug!
> >
> > Does the softlockup give a useful stacktrace? I don't have a thunderx2
> > so I cannot reproduce.
>
> Sorry for the late reply, below is the dump that i am getting, when i
> hit the softlockup.
> Any suggestions to debug this further?
>
> sequence of commands, which leads to this lockup,
> insmod thunderx2_pmu.ko
> perf stat -e \
> uncore_dmc_0/cnt_cycles/,\
> uncore_dmc_0/data_transfers/,\
> uncore_dmc_0/read_txns/,\
> uncore_dmc_0/config=0xE/,\
> uncore_dmc_0/write_txns/\
> rmmod thunderx2_pmu
> insmod thunderx2_pmu.ko
>
> root@SBR-26>~>> [ 1065.946772] watchdog: BUG: soft lockup - CPU#117
> stuck for 22s! [perf:5206]
> [ 1065.953722] Modules linked in: thunderx2_pmu(OE) nls_iso8859_1
> joydev input_leds bridge ipmi_ssif ipmi_devintf stp llc
> ipmi_msghandler sch_fq_codel ib_iser rdma_cm iw_cm ib_cm ib_core
> iscsi_tcp libiscsi_tcp
> libiscsi scsi_transport_iscsi ppdev lp parport ip_tables x_tables
> autofs4 btrfs zstd_compress raid10 raid456 async_raid6_recov
> async_memcpy async_pq async_xor async_tx xor xor_neon raid6_pq raid1
> raid0 multipat
> h linear aes_ce_blk hid_generic aes_ce_cipher usbhid uas usb_storage
> hid ast i2c_algo_bit drm_vram_helper ttm drm_kms_helper syscopyarea
> sysfillrect sysimgblt fb_sys_fops drm i40e i2c_smbus bnx2x
> crct10dif_ce g
> hash_ce e1000e sha2_ce mpt3sas nvme sha256_arm64 ptp ahci raid_class
> sha1_ce nvme_core scsi_transport_sas mdio libahci pps_core libcrc32c
> gpio_xlp i2c_xlp9xx aes_neon_bs aes_neon_blk crypto_simd cryptd
> aes_arm6
> 4 [last unloaded: thunderx2_pmu]
> [ 1066.029640] CPU: 117 PID: 5206 Comm: perf Tainted: G OE
> 5.3.0+ #160
> [ 1066.037109] Hardware name: Cavium Inc. Saber/Saber, BIOS
> TX2-FW-Release-7.2-build_08-0-g14f8c5bf8a 12/18/2018
> [ 1066.047009] pstate: 20400009 (nzCv daif +PAN -UAO)
> [ 1066.051799] pc : smp_call_function_single+0x198/0x1b0
> [ 1066.056838] lr : smp_call_function_single+0x16c/0x1b0
> [ 1066.061875] sp : fffffc00434cfc50
> [ 1066.065177] x29: fffffc00434cfc50 x28: 0000000000000000
> [ 1066.070475] x27: fffffebed4d2d952 x26: ffffffffd4d2d800
> [ 1066.075774] x25: fffffddf5da1e240 x24: 0000000000000001
> [ 1066.081073] x23: fffffc00434cfd38 x22: fffffc001026adb8
> [ 1066.086371] x21: 0000000000000000 x20: fffffc0011843000
> [ 1066.091669] x19: fffffc00434cfca0 x18: 0000000000000000
> [ 1066.096968] x17: 0000000000000000 x16: 0000000000000000
> [ 1066.102266] x15: 0000000000000000 x14: 0000000000000000
> [ 1066.107564] x13: 0000000000000000 x12: 0000000000000020
> [ 1066.112862] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f
> [ 1066.118161] x9 : 0000000000000000 x8 : fffffebed44ec5e8
> [ 1066.123459] x7 : 0000000000000000 x6 : fffffc00434cfca0
> [ 1066.128757] x5 : fffffc00434cfca0 x4 : 0000000000000001
> [ 1066.134055] x3 : fffffc00434cfcb8 x2 : 0000000000000000
> [ 1066.139353] x1 : 0000000000000003 x0 : 0000000000000000
> [ 1066.144652] Call trace:
> [ 1066.147088] smp_call_function_single+0x198/0x1b0
> [ 1066.151784] perf_install_in_context+0x1b4/0x1d8
> [ 1066.156394] __se_sys_perf_event_open+0x634/0xa68
> [ 1066.161089] __arm64_sys_perf_event_open+0x1c/0x28
> [ 1066.165881] el0_svc_common.constprop.0+0x78/0x168
> [ 1066.170660] el0_svc_handler+0x34/0x90
> [ 1066.174399] el0_svc+0x8/0xc
> [ 1100.985033] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> [ 1100.990944] rcu: 0-...0: (4 ticks this GP) idle=bb6/0/0x1
> softirq=2178/2178 fqs=7365
> [ 1100.998864] (detected by 154, t=15005 jiffies, g=14325, q=7133)
> [ 1101.004857] Task dump for CPU 0:
> [ 1101.008074] swapper/0 R running task 0 0 0 0x0000002a
> [ 1101.015110] Call trace:
> [ 1101.017553] __switch_to+0xbc/0x220
> [ 1244.366396] INFO: task kworker/116:1:1364 blocked for more than 120 seconds.
> [ 1244.373443] Tainted: G OEL 5.3.0+ #160
> [ 1244.378847] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
> disables this message.
> [ 1244.386673] kworker/116:1 D 0 1364 2 0x00000028
> [ 1244.392166] Workqueue: events do_free_init
> [ 1244.396260] Call trace:
> [ 1244.398705] __switch_to+0x194/0x220
> [ 1244.402282] __schedule+0x30c/0x758
> [ 1244.405758] schedule+0x38/0xa8
> [ 1244.408896] schedule_timeout+0x220/0x3a8
> [ 1244.412902] wait_for_common+0x110/0x220
> [ 1244.416819] wait_for_completion+0x28/0x38
> [ 1244.420914] __wait_rcu_gp+0x170/0x1a8
> [ 1244.424658] synchronize_rcu+0x70/0xa0
> [ 1244.428403] do_free_init+0x3c/0x70
> [ 1244.431889] process_one_work+0x1f8/0x438
> [ 1244.435896] worker_thread+0x50/0x4b8
> [ 1244.439554] kthread+0x130/0x138
> [ 1244.442778] ret_from_fork+0x10/0x18
> [ 1280.996503] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> [ 1281.002415] rcu: 0-...0: (4 ticks this GP) idle=bb6/0/0x1
> softirq=2178/2178 fqs=29040
> [ 1281.010420] (detected by 186, t=60010 jiffies, g=14325, q=22339)
> [ 1281.016500] Task dump for CPU 0:
> [ 1281.019715] swapper/0 R running task 0 0 0 0x0000002a
> [ 1281.026751] Call trace:
> [ 1281.029189] __switch_to+0xbc/0x220
> [ 1365.192710] INFO: task kworker/116:1:1364 blocked for more than 241 seconds.
> [ 1365.199756] Tainted: G OEL 5.3.0+ #160
> [ 1365.205158] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
> disables this message.
> [ 1365.212984] kworker/116:1 D 0 1364 2 0x00000028
> [ 1365.218475] Workqueue: events do_free_init
> [ 1365.222569] Call trace:
> [ 1365.225014] __switch_to+0x194/0x220
> [ 1365.228589] __schedule+0x30c/0x758
> [ 1365.232065] schedule+0x38/0xa8
> [ 1365.235203] schedule_timeout+0x220/0x3a8
> [ 1365.239209] wait_for_common+0x110/0x220
> [ 1365.243127] wait_for_completion+0x28/0x38
> [ 1365.247222] __wait_rcu_gp+0x170/0x1a8
> [ 1365.250966] synchronize_rcu+0x70/0xa0
> [ 1365.254711] do_free_init+0x3c/0x70
> [ 1365.258198] process_one_work+0x1f8/0x438
> [ 1365.262205] worker_thread+0x50/0x4b8
> [ 1365.265863] kthread+0x130/0x138
> [ 1365.269087] ret_from_fork+0x10/0x18
> [ 1461.008017] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
> [ 1461.013929] rcu: 0-...0: (4 ticks this GP) idle=bb6/0/0x1
> softirq=2178/2178 fqs=51540
> [ 1461.021930] (detected by 123, t=105015 jiffies, g=14325, q=37487)
> [ 1461.028096] Task dump for CPU 0:
> [ 1461.031311] swapper/0 R running task 0 0 0 0x0000002a
> [ 1461.038347] Call trace:
> [ 1461.040785] __switch_to+0xbc/0x220
> [ 1486.023005] INFO: task kworker/116:1:1364 blocked for more than 362 seconds.
> [ 1486.030049] Tainted: G OEL 5.3.0+ #160
> [ 1486.035447] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs"
> disables this message.
> [ 1486.043272] kworker/116:1 D 0 1364 2 0x00000028
> [ 1486.048762] Workqueue: events do_free_init
> [ 1486.052856] Call trace:
> [ 1486.055300] __switch_to+0x194/0x220
> [ 1486.058875] __schedule+0x30c/0x758
> [ 1486.062351] schedule+0x38/0xa8
> [ 1486.065487] schedule_timeout+0x220/0x3a8
> [ 1486.069493] wait_for_common+0x110/0x220
> [ 1486.073411] wait_for_completion+0x28/0x38
> [ 1486.077504] __wait_rcu_gp+0x170/0x1a8
> [ 1486.081248] synchronize_rcu+0x70/0xa0
> [ 1486.084994] do_free_init+0x3c/0x70
> [ 1486.088479] process_one_work+0x1f8/0x438
> [ 1486.092486] worker_thread+0x50/0x4b8
> [ 1486.096143] kthread+0x130/0x138
> [ 1486.099367] ret_from_fork+0x10/0x18
> [ 1606.849300] INFO: task kworker/116:1:1364 blocked for more than 483 seconds.
> [ 1606.856345] Tainted: G OEL 5.3.0+ #160
>
>
I am able to see same system lockup on Intel xeon machine as well, if
i do same sequence of commands.
If i run for 4 events, which will not kick-in event multiplexing and
no issues seen.
If i try with more than 4 events, which leads to event multiplexing
and softlockup happens.
[gkulkarni@xeon-numa ~]$ uname -a
Linux xeon-numa 5.3.0 #3 SMP Mon Oct 14 15:47:06 IST 2019 x86_64
x86_64 x86_64 GNU/Linux
[gkulkarni@xeon-numa ~]$ cat /proc/cpuinfo | more
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 63
model name : Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz
stepping : 2
microcode : 0x29
cpu MHz : 1198.775
cache size : 15360 KB
physical id : 0
siblings : 12
core id : 0
cpu cores : 6
apicid : 0
initial apicid : 0
fpu : yes
fpu_exception : yes
cpuid level : 15
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe
syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts
rep_good
nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64
monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid dca
sse4_1 sse4_2 x2apic movbe popcnt aes xsave avx f16c rdrand lahf_lm
abm cp
uid_fault epb invpcid_single pti tpr_shadow vnmi flexpriority ept vpid
ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid cqm
xsaveopt cqm_llc cqm_occup_llc dtherm ida arat pln pts
bugs : cpu_meltdown spectre_v1 spectre_v2 spec_store_bypass
l1tf mds swapgs
bogomips : 4794.37
clflush size : 64
cache_alignment : 64
address sizes : 46 bits physical, 48 bits virtual
power management:
[gkulkarni@xeon-numa ~]$ sh -x t1.sh
+ sudo modprobe intel_uncore
+ sudo perf stat -a -e
uncore_imc_0/cas_count_read/,uncore_imc_0/cas_count_write/,uncore_imc_0/clockticks/,uncore_imc_0/cas_count_read/,uncore_imc_0/cas_count_write/
sleep 1
Performance counter stats for 'system wide':
8.85 MiB uncore_imc_0/cas_count_read/
(79.88%)
3.10 MiB uncore_imc_0/cas_count_write/
(80.10%)
1781830530 uncore_imc_0/clockticks/
(79.98%)
9.10 MiB uncore_imc_0/cas_count_read/
(80.04%)
3.08 MiB uncore_imc_0/cas_count_write/
(80.00%)
1.004236760 seconds time elapsed
+ sudo rmmod intel_uncore
[gkulkarni@xeon-numa ~]$ sh -x t1.sh
+ sudo modprobe intel_uncore
Message from syslogd@localhost at Oct 15 10:10:22 ...
kernel:[ 625.240222] watchdog: BUG: soft lockup - CPU#18 stuck for
23s! [systemd:3973]
Message from syslogd@localhost at Oct 15 10:10:22 ...
kernel:watchdog: BUG: soft lockup - CPU#18 stuck for 23s! [systemd:3973]
Thanks,
Ganapat
> Thanks,
> Ganapat