Re: [PATCH 09/12] iomap: lift the xfs writeback code to iomap

From: Dave Chinner
Date: Tue Oct 15 2019 - 18:07:29 EST


On Tue, Oct 15, 2019 at 05:43:42PM +0200, Christoph Hellwig wrote:
> Take the xfs writeback code and move it to fs/iomap. A new structure
> with three methods is added as the abstraction from the generic writeback
> code to the file system. These methods are used to map blocks, submit an
> ioend, and cancel a page that encountered an error before it was added to
> an ioend.
>
> Signed-off-by: Christoph Hellwig <hch@xxxxxx>
> ---
> fs/iomap/buffered-io.c | 564 ++++++++++++++++++++++++++++++++++-
> fs/iomap/trace.h | 39 +++
> fs/xfs/xfs_aops.c | 662 ++++-------------------------------------
> fs/xfs/xfs_aops.h | 17 --
> fs/xfs/xfs_super.c | 11 +-
> fs/xfs/xfs_trace.h | 39 ---
> include/linux/iomap.h | 59 ++++
> 7 files changed, 722 insertions(+), 669 deletions(-)
.....
> @@ -468,6 +471,8 @@ EXPORT_SYMBOL_GPL(iomap_is_partially_uptodate);
> int
> iomap_releasepage(struct page *page, gfp_t gfp_mask)
> {
> + trace_iomap_releasepage(page->mapping->host, page, 0, 0);
> +
> /*
> * mm accommodates an old ext3 case where clean pages might not have had
> * the dirty bit cleared. Thus, it can send actual dirty pages to
> @@ -483,6 +488,8 @@ EXPORT_SYMBOL_GPL(iomap_releasepage);
> void
> iomap_invalidatepage(struct page *page, unsigned int offset, unsigned int len)
> {
> + trace_iomap_invalidatepage(page->mapping->host, page, offset, len);
> +

These tracepoints should be split out into a separate patch like
the readpage(s) tracepoints. Maybe just lift all the non-writeback
ones in a single patch...

> /*
> * If we are invalidating the entire page, clear the dirty state from it
> * and release it to avoid unnecessary buildup of the LRU.
> @@ -1084,3 +1091,558 @@ vm_fault_t iomap_page_mkwrite(struct vm_fault *vmf, const struct iomap_ops *ops)
> return block_page_mkwrite_return(ret);
> }
> EXPORT_SYMBOL_GPL(iomap_page_mkwrite);
> +
> +static void
> +iomap_finish_page_writeback(struct inode *inode, struct bio_vec *bvec,
> + int error)
> +{
> + struct iomap_page *iop = to_iomap_page(bvec->bv_page);
> +
> + if (error) {
> + SetPageError(bvec->bv_page);
> + mapping_set_error(inode->i_mapping, -EIO);
> + }
> +
> + WARN_ON_ONCE(i_blocksize(inode) < PAGE_SIZE && !iop);
> + WARN_ON_ONCE(iop && atomic_read(&iop->write_count) <= 0);
> +
> + if (!iop || atomic_dec_and_test(&iop->write_count))
> + end_page_writeback(bvec->bv_page);
> +}

Can we just pass the struct page into this function?

.....

> +/*
> + * Submit the bio for an ioend. We are passed an ioend with a bio attached to
> + * it, and we submit that bio. The ioend may be used for multiple bio
> + * submissions, so we only want to allocate an append transaction for the ioend
> + * once. In the case of multiple bio submission, each bio will take an IO

This needs to be changed to describe what wpc->ops->submit_ioend()
is used for rather than what XFS might use this hook for.

> + * reference to the ioend to ensure that the ioend completion is only done once
> + * all bios have been submitted and the ioend is really done.
> + *
> + * If @error is non-zero, it means that we have a situation where some part of
> + * the submission process has failed after we have marked paged for writeback
> + * and unlocked them. In this situation, we need to fail the bio and ioend
> + * rather than submit it to IO. This typically only happens on a filesystem
> + * shutdown.
> + */
> +static int
> +iomap_submit_ioend(struct iomap_writepage_ctx *wpc, struct iomap_ioend *ioend,
> + int error)
> +{
> + ioend->io_bio->bi_private = ioend;
> + ioend->io_bio->bi_end_io = iomap_writepage_end_bio;
> +
> + if (wpc->ops->submit_ioend)
> + error = wpc->ops->submit_ioend(ioend, error);

I'm not sure that "submit_ioend" is the best name for this method,
as it is a pre-bio-submission hook, not an actual IO submission
method. "prepare_ioend_for_submit" is more descriptive, but probably
too long. wpc->ops->prepare_submit(ioend, error) reads pretty well,
though...

> + if (error) {
> + /*
> + * If we are failing the IO now, just mark the ioend with an
> + * error and finish it. This will run IO completion immediately
> + * as there is only one reference to the ioend at this point in
> + * time.
> + */
> + ioend->io_bio->bi_status = errno_to_blk_status(error);
> + bio_endio(ioend->io_bio);
> + return error;
> + }
> +
> + submit_bio(ioend->io_bio);
> + return 0;
> +}

.....
> +/*
> + * We implement an immediate ioend submission policy here to avoid needing to
> + * chain multiple ioends and hence nest mempool allocations which can violate
> + * forward progress guarantees we need to provide. The current ioend we are
> + * adding blocks to is cached on the writepage context, and if the new block

adding pages to ... , and if the new block mapping

> + * does not append to the cached ioend it will create a new ioend and cache that
> + * instead.
> + *
> + * If a new ioend is created and cached, the old ioend is returned and queued
> + * locally for submission once the entire page is processed or an error has been
> + * detected. While ioends are submitted immediately after they are completed,
> + * batching optimisations are provided by higher level block plugging.
> + *
> + * At the end of a writeback pass, there will be a cached ioend remaining on the
> + * writepage context that the caller will need to submit.
> + */
> +static int
> +iomap_writepage_map(struct iomap_writepage_ctx *wpc,
> + struct writeback_control *wbc, struct inode *inode,
> + struct page *page, u64 end_offset)
> +{
> + struct iomap_page *iop = to_iomap_page(page);
> + struct iomap_ioend *ioend, *next;
> + unsigned len = i_blocksize(inode);
> + u64 file_offset; /* file offset of page */
> + int error = 0, count = 0, i;
> + LIST_HEAD(submit_list);
> +
> + WARN_ON_ONCE(i_blocksize(inode) < PAGE_SIZE && !iop);
> + WARN_ON_ONCE(iop && atomic_read(&iop->write_count) != 0);
> +
> + /*
> + * Walk through the page to find areas to write back. If we run off the
> + * end of the current map or find the current map invalid, grab a new
> + * one.
> + */
> + for (i = 0, file_offset = page_offset(page);
> + i < (PAGE_SIZE >> inode->i_blkbits) && file_offset < end_offset;
> + i++, file_offset += len) {
> + if (iop && !test_bit(i, iop->uptodate))
> + continue;
> +
> + error = wpc->ops->map_blocks(wpc, inode, file_offset);
> + if (error)
> + break;
> + if (wpc->iomap.type == IOMAP_HOLE)
> + continue;
> + iomap_add_to_ioend(inode, file_offset, page, iop, wpc, wbc,
> + &submit_list);
> + count++;
> + }
> +
> + WARN_ON_ONCE(!wpc->ioend && !list_empty(&submit_list));
> + WARN_ON_ONCE(!PageLocked(page));
> + WARN_ON_ONCE(PageWriteback(page));
> +
> + /*
> + * On error, we have to fail the ioend here because we may have set
> + * pages under writeback, we have to make sure we run IO completion to
> + * mark the error state of the IO appropriately, so we can't cancel the
> + * ioend directly here.

Few too many commas and run-ons here. Maybe reword it like this:

/*
* We cannot cancel the ioend directly here if there is a submission
* error. We may have already set pages under writeback and hence we
* have to run IO completion to mark the error state of the pages under
* writeback appropriately.

>
>
> That means we have to mark this page as under
> + * writeback if we included any blocks from it in the ioend chain so
> + * that completion treats it correctly.
> + *
> + * If we didn't include the page in the ioend, the on error we can
then on error

> + * simply discard and unlock it as there are no other users of the page
> + * now. The caller will still need to trigger submission of outstanding
> + * ioends on the writepage context so they are treated correctly on
> + * error.
> + */

.....

> +static int
> +iomap_do_writepage(struct page *page, struct writeback_control *wbc, void *data)
> +{
> + struct iomap_writepage_ctx *wpc = data;
> + struct inode *inode = page->mapping->host;
> + pgoff_t end_index;
> + u64 end_offset;
> + loff_t offset;
> +
> + trace_iomap_writepage(inode, page, 0, 0);
> +
> + /*
> + * Refuse to write the page out if we are called from reclaim context.
> + *
> + * This avoids stack overflows when called from deeply used stacks in
> + * random callers for direct reclaim or memcg reclaim. We explicitly
> + * allow reclaim from kswapd as the stack usage there is relatively low.
> + *
> + * This should never happen except in the case of a VM regression so
> + * warn about it.
> + */
> + if (WARN_ON_ONCE((current->flags & (PF_MEMALLOC|PF_KSWAPD)) ==
> + PF_MEMALLOC))
> + goto redirty;
> +
> + /*
> + * Given that we do not allow direct reclaim to call us, we should
> + * never be called while in a filesystem transaction.
> + */

never be called in a recursive filesystem reclaim context.

> + if (WARN_ON_ONCE(current->flags & PF_MEMALLOC_NOFS))
> + goto redirty;
> +

Cheers,

Dave.
--
Dave Chinner
david@xxxxxxxxxxxxx