[PATCH 1/5] arm64: dts: imx8qxp: Move usdhc clocks assignment to board DT

[Anson Huang]

usdhc's clock rate is different according to different devices
connected, so clock rate assignment should be placed in board
DT according to different devices connected on each usdhc port.

Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
---
 arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts | 4 ++++
 arch/arm64/boot/dts/freescale/imx8qxp-mek.dts   | 4 ++++
 arch/arm64/boot/dts/freescale/imx8qxp.dtsi      | 6 ------
 3 files changed, 8 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts
index 91eef97..a3f8cf1 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts
@@ -133,6 +133,8 @@
 &usdhc1 {
 	#address-cells = <1>;
 	#size-cells = <0>;
+	assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>;
+	assigned-clock-rates = <200000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	bus-width = <4>;
@@ -149,6 +151,8 @@
 
 /* SD */
 &usdhc2 {
+	assigned-clocks = <&clk IMX_CONN_SDHC1_CLK>;
+	assigned-clock-rates = <200000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <4>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index 88dd9132..d3d26cc 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -137,6 +137,8 @@
 };
 
 &usdhc1 {
+	assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>;
+	assigned-clock-rates = <200000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	bus-width = <8>;
@@ -147,6 +149,8 @@
 };
 
 &usdhc2 {
+	assigned-clocks = <&clk IMX_CONN_SDHC1_CLK>;
+	assigned-clock-rates = <200000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
 	bus-width = <4>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index 2d69f1a..9646a41 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -368,8 +368,6 @@
 				 <&conn_lpcg IMX_CONN_LPCG_SDHC0_PER_CLK>,
 				 <&conn_lpcg IMX_CONN_LPCG_SDHC0_HCLK>;
 			clock-names = "ipg", "per", "ahb";
-			assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>;
-			assigned-clock-rates = <200000000>;
 			power-domains = <&pd IMX_SC_R_SDHC_0>;
 			status = "disabled";
 		};
@@ -383,8 +381,6 @@
 				 <&conn_lpcg IMX_CONN_LPCG_SDHC1_PER_CLK>,
 				 <&conn_lpcg IMX_CONN_LPCG_SDHC1_HCLK>;
 			clock-names = "ipg", "per", "ahb";
-			assigned-clocks = <&clk IMX_CONN_SDHC1_CLK>;
-			assigned-clock-rates = <200000000>;
 			power-domains = <&pd IMX_SC_R_SDHC_1>;
 			fsl,tuning-start-tap = <20>;
 			fsl,tuning-step= <2>;
@@ -400,8 +396,6 @@
 				 <&conn_lpcg IMX_CONN_LPCG_SDHC2_PER_CLK>,
 				 <&conn_lpcg IMX_CONN_LPCG_SDHC2_HCLK>;
 			clock-names = "ipg", "per", "ahb";
-			assigned-clocks = <&clk IMX_CONN_SDHC2_CLK>;
-			assigned-clock-rates = <200000000>;
 			power-domains = <&pd IMX_SC_R_SDHC_2>;
 			status = "disabled";
 		};
-- 
2.7.4