Re: [PATCH] pwm: sun4i: Fix incorrect calculation of duty_cycle/period

[Thierry Reding]

On Mon, Oct 14, 2019 at 03:53:03PM +0200, megous@xxxxxxxxxx wrote:
> From: Ondrej Jirman <megous@xxxxxxxxxx>
> 
> Since 5.4-rc1, pwm_apply_state calls ->get_state after ->apply
> if available, and this revealed an issue with integer precision
> when calculating duty_cycle and period for the currently set
> state in ->get_state callback.
> 
> This issue manifested in broken backlight on several Allwinner
> based devices.
> 
> Previously this worked, because ->apply updated the passed state
> directly.
> 
> Fixes: deb9c462f4e53 ("pwm: sun4i: Don't update the state for the caller of pwm_apply_state")
> Signed-off-by: Ondrej Jirman <megous@xxxxxxxxxx>
> ---
>  drivers/pwm/pwm-sun4i.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)

Applied, thanks.

Thierry

> diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c
> index 6f5840a1a82d..05273725a9ff 100644
> --- a/drivers/pwm/pwm-sun4i.c
> +++ b/drivers/pwm/pwm-sun4i.c
> @@ -137,10 +137,10 @@ static void sun4i_pwm_get_state(struct pwm_chip *chip,
>  
>  	val = sun4i_pwm_readl(sun4i_pwm, PWM_CH_PRD(pwm->hwpwm));
>  
> -	tmp = prescaler * NSEC_PER_SEC * PWM_REG_DTY(val);
> +	tmp = (u64)prescaler * NSEC_PER_SEC * PWM_REG_DTY(val);
>  	state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, clk_rate);
>  
> -	tmp = prescaler * NSEC_PER_SEC * PWM_REG_PRD(val);
> +	tmp = (u64)prescaler * NSEC_PER_SEC * PWM_REG_PRD(val);
>  	state->period = DIV_ROUND_CLOSEST_ULL(tmp, clk_rate);
>  }
>  
> -- 
> 2.23.0
>

Attachment: signature.asc
Description: PGP signature