Re: [PATCH] serial: core: Use cons->index for preferred console registration

[Michal Simek]

On 15. 10. 19 19:54, Greg Kroah-Hartman wrote:
> On Tue, Oct 15, 2019 at 04:36:56PM +0200, Michal Simek wrote:
>> On 15. 10. 19 11:51, Geert Uytterhoeven wrote:
>>> Hi Michal,
>>>
>>> On Tue, Oct 15, 2019 at 11:22 AM Michal Simek <monstr@xxxxxxxxx> wrote:
>>>> On 15. 10. 19 11:19, Geert Uytterhoeven wrote:
>>>>> On Mon, Sep 2, 2019 at 4:29 PM Michal Simek <michal.simek@xxxxxxxxxx> wrote:
>>>>>> The reason for this patch is xilinx_uartps driver which create one dynamic
>>>>>> instance per IP with unique major and minor combinations. drv->nr is in
>>>>>> this case all the time setup to 1. That means that uport->line is all the
>>>>>> time setup to 0 and drv->tty_driver->name_base is doing shift in name to
>>>>>> for example ttyPS3.
>>>>>>
>>>>>> register_console() is looping over console_cmdline array and looking for
>>>>>> proper name/index combination which is in our case ttyPS/3.
>>>>>> That's why every instance of driver needs to be registered with proper
>>>>>> combination of name/number (ttyPS/3). Using uport->line is doing
>>>>>> registration with ttyPS/0 which is wrong that's why proper console index
>>>>>> should be used which is in cons->index field.
>>>>>>
>>>>>> Also it is visible that recording console should be done based on
>>>>>> information about console not about the port but in most cases numbers are
>>>>>> the same and xilinx_uartps is only one exception now.
>>>>>>
>>>>>> Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx>
>>>>>
>>>>> This is now commit 91daae03188e0dd1 ("serial: core: Use cons->index
>>>>> for preferred console registration") in tty-next.
>>>>>
>>>>> This has been bisected to break the serial console on (at least)
>>>>> r8a7791/koelsch and r8a7795/h3-salvator-xs.
>>>>>
>>>>> The line "printk: console [ttySC0] enabled" is no longer printed.
>>>>> The system continues booting without any serial console output, and the
>>>>> login prompt never appears on the serial console.
>>>>>
>>>>> Reverting this commit fixes the issue.
>>>>
>>>> Sorry for trouble with this patch. Can you please point me to dts files
>>>> for these boards and also what's the value you have in uport->line and
>>>
>>> arch/arm/boot/dts/r8a7791-koelsch.dts
>>> arch/arm64/boot/dts/renesas/r8a7795-salvator-xs.dts
>>>
>>>> uport->cons->index?
>>>
>>> On r8a7791/koelsch:
>>>
>>>     Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>>>     platform serial8250: uport->line = 0, uport->cons->index = -1
>>>     platform serial8250: uport->line = 1, uport->cons->index = -1
>>>     platform serial8250: uport->line = 2, uport->cons->index = -1
>>>     platform serial8250: uport->line = 3, uport->cons->index = -1
>>>     SuperH (H)SCI(F) driver initialized
>>>   * sh-sci e6e60000.serial: uport->line = 0, uport->cons->index = -1
>>>   * e6e60000.serial: ttySC0 at MMIO 0xe6e60000 (irq = 79, base_baud =
>>> 0) is a scif
>>>     printk: console [ttySC0] enabled
>>>     sh-sci e6e68000.serial: uport->line = 1, uport->cons->index = 0
>>>     e6e68000.serial: ttySC1 at MMIO 0xe6e68000 (irq = 80, base_baud =
>>> 0) is a scif
>>>
>>> On r8a7795/salvator-xs:
>>>
>>>     sh-sci e6550000.serial: uport->line = 1, uport->cons->index = -1
>>>     e6550000.serial: ttySC1 at MMIO 0xe6550000 (irq = 34, base_baud =
>>> 0) is a hscif
>>>   * sh-sci e6e88000.serial: uport->line = 0, uport->cons->index = -1
>>>   * e6e88000.serial: ttySC0 at MMIO 0xe6e88000 (irq = 120, base_baud =
>>> 0) is a scif
>>>     printk: console [ttySC0] enabled
>>>
>>> Actual serial consoles marked with *.
>>>
>>> There are no 8250 serial ports in the system, shmobile_defconfig just includes
>>> driver support for it.
>>
>> ok. I will take a look at why it is not initialized in this case. Do you
>> have any qemu available for these boards?
>>
>> Greg: Please revert this patch I will investigate why it is failing.
> 
> Which patch exactly?  Can you provide a revert?  That makes it easiest
> for me.

Sure. Revert sent.

Thanks,
Michal