Re: [PATCH V4 2/3] dt-bindings: Add Logic PD Type 28 display panel

[Rob Herring]

On Tue, Oct 15, 2019 at 6:04 PM Adam Ford <aford173@xxxxxxxxx> wrote:
>
> On Wed, Oct 9, 2019 at 6:31 PM Rob Herring <robh@xxxxxxxxxx> wrote:
> >
> > On Tue, Oct 01, 2019 at 06:39:22PM -0500, Adam Ford wrote:
> > > This patch adds documentation of device tree bindings for the WVGA panel
> > > Logic PD Type 28 display.
> > >
> > > Signed-off-by: Adam Ford <aford173@xxxxxxxxx>
> > > ---
> > > V4:  Update per Rob H's suggestions and copy other panel yaml example from 5.4-rc1
> > > V3:  Correct build errors from 'make dt_binding_check'
> >
> > The example still fails to build here.
>
> I cannot replicate the build error on 5.4-RC3 at least for this
> binding on V4 of the patch.  I get build error on other bindings.
>
> $ make dt_binding_check ARCH=arm
> scripts/kconfig/conf  --syncconfig Kconfig
>   SCHEMA  Documentation/devicetree/bindings/processed-schema.yaml
> /home/aford/src/linux/Documentation/devicetree/bindings/net/adi,adin.yaml:
> ignoring, error in schema 'adi,rx-internal-delay-ps'
> warning: no schema found in file:
> Documentation/devicetree/bindings/net/adi,adin.yaml
> /home/aford/src/linux/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml:
> ignoring, error in schema '0'
> warning: no schema found in file:
> Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
>   CHKDT   Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
>   ....
>   CHKDT   Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml
>   CHKDT   Documentation/devicetree/bindings/display/panel/ampire,am-480272h3tmqw-t01h.yaml
>   CHKDT   Documentation/devicetree/bindings/display/panel/logicpd,type28.yaml
>   CHKDT   Documentation/devicetree/bindings/display/panel/ronbo,rb070d30.yaml
>  ...
>  CHKDT   Documentation/devicetree/bindings/media/allwinner,sun4i-a10-ir.yaml
>   CHKDT   Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml
> Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml:
> $id: path/filename 'arm/allwinner,sun4i-a10-csi.yaml' doesn't match
> actual filename
> Documentation/devicetree/bindings/Makefile:12: recipe for target
> 'Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.example.dts'
> failed
> make[1]: *** [Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.example.dts]
> Error 1
> Makefile:1263: recipe for target 'dt_binding_check' failed
> make: *** [dt_binding_check] Error 2
>
>
> I took out some of the logs to make it less chatty.  I don't know
> anything about yaml or what the expectations are, so if there is a
> test beyond 'make dt_binding_check' please let me know.

Perhaps 'make -k' is needed because of the other failures. Or try on
top of linux-next which should all be fixed.

Rob