[PATCH] ARM: dts: imx6dl-yapp4: Enable UART2

[Michal VokÃÄ]

The second UARTÂis needed for 3D or MFD printer control.

Signed-off-by: Michal VokÃÄ <michal.vokac@xxxxxxxxx>
---
 arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index e8d800fec637..663a72a96b6c 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -447,6 +447,13 @@
 		>;
 	};
 
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__UART2_TX_DATA	0x1b098
+			MX6QDL_PAD_GPIO_8__UART2_RX_DATA	0x1b098
+		>;
+	};
+
 	pinctrl_usbh1: usbh1grp {
 		fsl,pins = <
 			MX6QDL_PAD_EIM_D30__USB_H1_OC	0x1b098
@@ -532,6 +539,12 @@
 	status = "okay";
 };
 
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
 &usbh1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usbh1>;
-- 
2.1.4