Fwd: PCMCIA not working on Panasonic Toughbook CF-29

From: Trevor Jacobs
Date: Wed Oct 16 2019 - 15:15:29 EST

Next message: Arvind Sankar: "Re: [PATCH] iommu/vt-d: Return the correct dma mask when we are bypassing the IOMMU"
Previous message: Marcel Holtmann: "Re: [PATCHv2 4/4] Bluetooth: btwilink: drop superseded driver"
In reply to: Michael .: "PCMCIA not working on Panasonic Toughbook CF-29"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Hi Dominik,
Please see attached the outputs that you asked for in 2 files. CF-29_MK5_2.6.32.txt is the requested outputs while running Antix Linux M8.5 with Kernel 2.6.32. CF-29_MK5_4.9.160.txt is the requested outputs running Antix Linux 17.4.1 with kernel 4.9.160.

Thank you in advance for your help!
Kind regards,Trevor Jacobs

-----Original Message-----
From: Dominik Brodowski <linux@xxxxxxxxxxxxxxxxxxxx>
To: Michael . <keltoiboy@xxxxxxxxx>
Cc: linux-kernel <linux-kernel@xxxxxxxxxxxxxxx>; Morgan Klym <moklym@xxxxxxxxx>; Trevor Jacobs <trevor_jacobs@xxxxxxx>; Kris Cleveland <tridentperfusion@xxxxxxxxx>; Jeff <bluerocksaddles@xxxxxxxxxxxxxxxxx>
Sent: Tue, Oct 15, 2019 1:48 am
Subject: Re: PCMCIA not working on Panasonic Toughbook CF-29

On Tue, Oct 15, 2019 at 05:04:28PM +1100, Michael . wrote:
> Good afternoon kernel developers
> Please accept my apology for contacting you directly about this. A
> small group of friends, some of whom are CCed here, have come together
> to try and find a solution to a problem that originated with the
> demise of kernel 2.6:32. First some background to the issue. We are
> all users of Panasonic Toughbook CF-29 models (ranging from Mark 1
> through to Mark 5). These Toughbooks have 2 PCMCIA card slots which
> are used by a variety of people for different purposes. On the CF-29
> Mark 1 through to Mark 3 these slots work without problem. On the
> CF-29 Mark 4 and Mark 5 the last known kernel the top slot worked with
> was 2.6:32. This has been confirmed all all major distros by most of
> the small group of friends I mentioned earlier.
>
> Thinking it was just a kernel config issue I did some comparisons
> between Debian 6 (Squeeze), Debian 7 (Wheezy), Ubuntu 10.04, and
> Ubuntu 10.10. On all machines both slots functioned as they should
> with Debian 6 and Ubuntu 10.04 but the top slot stopped working on
> Mark 4 and Mark 5 machines on the next release with the next kernel. I
> also tested Ubuntu 10.04 and 10.10 with the 2.6:32 and 2.6:35 kernel
> and both slots worked with the 2.6:32 kernel but not the 2.6:35
> kernel.With my comparisons I merged the config from 2.6:32 into the
> current kernel for Debian 4.19 and rebuilt the kernel, no matter what
> configuration changes I made the top slot still doesn't function on
> Mark 4 and Mark 5 machines.
>
> This issue, and its apparent start, has been confirmed on all major
> distro family groups. So this brings me, actually the small group of
> dedicated Linux users who own Panasonic Toughbook CF-29s, to contact
> you to ask for help in resolving this issue. I have some questions,
> and I realise the 2.6:32 kernel is long gone now but I'm hoping this
> is not a lost cause, what changes would have occurred between 2.6:32
> and 2.6:33 that would have stopped the hardware working on Mark 4 and
> Mark 5 CF-29 Toughbooks but not Mark 1 through to Mark 3? Would it be
> possible to correct the problem so that the hardware on our machines
> works as it should. While we are not kernel devs or even programmers
> we are enthusiasts who love Linux and our machines and we are hoping
> that together with you and the kernel dev group we can fix this issue
> together.
>
> I have attached various tar.gz files with ls* outputs so you can see
> the information we have so far. Thank you for taking the time to read
> this.

Is this with 16-bit PCMCIA cards, or with 32-bit CardBus cards? Either case,
please provide the output of

ÂÂÂ dmesg

ÂÂÂ lspci -vvv

and

ÂÂÂ lspcmcia -v -v

(ideally all for a working and non-working configuration).

Thanks,
ÂÂÂ Dominik
Panasonic CF-29 MK5 - Top PCMCIA (CardBUS) slot does work perfectly.
Top slot contains a Ubiquity SuperRange Cardbus WiFi card.
Bottom slot contains an Adaptec USB2connect 2 port USB card.

uname -a
Linux antiX1 2.6.32-1-mepis-smp #1 SMP PREEMPT Wed Apr 7 22:08:34 EDT 2010 i686 GNU/Linux

dmesg
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-1-mepis-smp (MEPIS 2.6.32-11mepis1) (waldi@xxxxxxxxxx) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP PREEMPT Wed Apr 7 22:08:34 EDT 2010
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f6e0000 (usable)
BIOS-e820: 000000007f6e0000 - 000000007f6ee000 (ACPI data)
BIOS-e820: 000000007f6ee000 - 000000007f700000 (ACPI NVS)
BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0006000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
DMI 2.3 present.
Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x7f6e0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-E3FFF write-back
E4000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 07F700000 mask FFFF00000 uncachable
2 base 07F800000 mask FFF800000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
PAT not supported by CPU.
initial memory mapped : 0 - 01800000
init_memory_mapping: 0000000000000000-00000000373fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037000000 page 2M
0037000000 - 00373fe000 page 4k
kernel direct mapping tables up to 373fe000 @ 10000-16000
RAMDISK: 37a00000 - 37fef213
Allocated new RAMDISK: 00100000 - 006ef213
Move RAMDISK from 0000000037a00000 - 0000000037fef212 to 00100000 - 006ef212
ACPI: RSDP 000f6840 00014 (v00 PTLTD )
ACPI: RSDT 7f6e604a 00040 (v01 PTLTD RSDT 06040000 LTP 00000000)
ACPI: FACP 7f6ede78 00084 (v02 MATBIO CF29-5 06040000 MEI 00000001)
ACPI: DSDT 7f6e68d0 075A8 (v01 MATBIO CF29-5 06040000 MSFT 0100000E)
ACPI: FACS 7f6eefc0 00040
ACPI: APIC 7f6edefc 00062 (v01 MATBIO CF29-5 06040000 MEI 00000001)
ACPI: BOOT 7f6edfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: MCFG 7f6edf9c 0003C (v01 MATBIO CF29-5 06040000 MEI 00000001)
ACPI: SSDT 7f6e6487 002B9 (v01 PmRef Cpu0Ist 00003000 INTL 20030224)
ACPI: SSDT 7f6e62a9 001DE (v01 PmRef Cpu0Cst 00003001 INTL 20030224)
ACPI: SSDT 7f6e608a 0021F (v01 PmRef CpuPm 00003000 INTL 20030224)
ACPI: Local APIC address 0xfee00000
1154MB HIGHMEM available.
883MB LOWMEM available.
mapped low ram: 0 - 373fe000
low ram: 0 - 373fe000
node 0 low ram: 00000000 - 373fe000
node 0 bootmap 00012000 - 00018e80
(9 early reservations) ==> bootmem [0000000000 - 00373fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0001000000 - 00015d0728] TEXT DATA BSS ==> [0001000000 - 00015d0728]
#4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
#5 [00015d1000 - 00015d71b4] BRK ==> [00015d1000 - 00015d71b4]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
#7 [0000100000 - 00006ef213] NEW RAMDISK ==> [0000100000 - 00006ef213]
#8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000373fe
HighMem 0x000373fe -> 0x0007f6e0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007f6e0
On node 0 totalpages: 521839
free_area_init_node: node 0, pgdat c14e69a0, node_mem_map c15d9200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1736 pages used for memmap
Normal zone: 220470 pages, LIFO batch:31
HighMem zone: 2310 pages used for memmap
HighMem zone: 293340 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 2 CPUs, 1 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 13 pages/cpu @c2800000 s29624 r0 d23624 u2097152
pcpu-alloc: s29624 r0 d23624 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517761
Kernel command line: root=/dev/sda2 nomce quiet nosplash vga=791
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
Initializing HighMem for node 0 (000373fe:0007f6e0)
Memory: 2057076k/2087808k available (3420k kernel code, 29352k reserved, 1623k data, 376k init, 1182600k highmem)
virtual kernel memory layout:
fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB)
.init : 0xc14ed000 - 0xc154b000 ( 376 kB)
.data : 0xc1357031 - 0xc14ece18 (1623 kB)
.text : 0xc1000000 - 0xc1357031 (3420 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:1280
Console: colour dummy device 80x25
console [tty0] enabled
Fast TSC calibration using PIT
Detected 1595.807 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.59 BogoMIPS (lpj=5319356)
Security Framework initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
Performance Events: p6 PMU driver.
... version: 0
... bit width: 32
... generic registers: 2
... value mask: 00000000ffffffff
... max period: 000000007fffffff
... fixed-purpose events: 0
... event mask: 0000000000000003
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20090903
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 08
Brought up 1 CPUs
Total of 1 processors activated (3192.59 BogoMIPS).
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62
ACPI: ACPI Dock Station Driver: 1 docks/bays found
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 32bit mmio: [0xb0080000-0xb00fffff]
pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807]
pci 0000:00:02.0: reg 18 32bit mmio pref: [0xc0000000-0xcfffffff]
pci 0000:00:02.0: reg 1c 32bit mmio: [0xb0000000-0xb003ffff]
pci 0000:00:02.1: reg 10 32bit mmio: [0x000000-0x07ffff]
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xb0040000-0xb00403ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1e.2: reg 10 io port: [0x1c00-0x1cff]
pci 0000:00:1e.2: reg 14 io port: [0x18c0-0x18ff]
pci 0000:00:1e.2: reg 18 32bit mmio: [0xb0040800-0xb00409ff]
pci 0000:00:1e.2: reg 1c 32bit mmio: [0xb0040400-0xb00404ff]
pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.2: PME# disabled
pci 0000:00:1e.3: reg 10 io port: [0x2400-0x24ff]
pci 0000:00:1e.3: reg 14 io port: [0x2000-0x207f]
pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.3: PME# disabled
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0900-097f
pci 0000:00:1f.2: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.2: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.2: reg 18 io port: [0x00-0x07]
pci 0000:00:1f.2: reg 1c io port: [0x00-0x03]
pci 0000:00:1f.2: reg 20 io port: [0x1890-0x189f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 20 io port: [0x18a0-0x18bf]
pci 0000:02:00.0: reg 10 64bit mmio: [0xb4000000-0xb4003fff]
pci 0000:02:00.0: reg 18 io port: [0x3000-0x30ff]
pci 0000:02:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PME# disabled
pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff]
pci 0000:00:1c.0: bridge 32bit mmio: [0xb4000000-0xb7ffffff]
pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd0000000-0xd3ffffff]
pci 0000:06:01.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:06:01.0: supports D1 D2
pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:01.0: PME# disabled
pci 0000:06:01.1: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:06:01.1: supports D1 D2
pci 0000:06:01.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:01.1: PME# disabled
pci 0000:06:01.2: reg 10 32bit mmio: [0xb8000000-0xb80000ff]
pci 0000:06:01.2: supports D1 D2
pci 0000:06:01.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:06:01.2: PME# disabled
pci 0000:06:02.0: reg 10 32bit mmio: [0xb8001000-0xb8001fff]
pci 0000:06:02.0: PME# supported from D0 D3hot D3cold
pci 0000:06:02.0: PME# disabled
pci 0000:00:1e.0: transparent bridge
pci 0000:00:1e.0: bridge 32bit mmio: [0xb8000000-0xb80fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs *9)
ACPI: PCI Interrupt Link [LNKB] (IRQs *9)
ACPI: PCI Interrupt Link [LNKC] (IRQs *9)
ACPI: PCI Interrupt Link [LNKD] (IRQs *9)
ACPI: PCI Interrupt Link [LNKE] (IRQs *9)
ACPI: PCI Interrupt Link [LNKF] (IRQs *9)
ACPI: PCI Interrupt Link [LNKG] (IRQs 9) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *9)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled by ACPI PNP
system 00:01: iomem range 0xcf200-0xcf7ff has been reserved
system 00:01: iomem range 0xd0800-0xd3fff has been reserved
system 00:02: ioport range 0x900-0x91f has been reserved
system 00:02: ioport range 0x92c-0x97f has been reserved
system 00:02: ioport range 0xfe00-0xfe01 has been reserved
system 00:02: ioport range 0x920-0x92b has been reserved
system 00:02: iomem range 0xfed40000-0xfed44fff has been reserved
system 00:03: ioport range 0x2e0-0x2e7 has been reserved
system 00:03: ioport range 0x330-0x337 has been reserved
system 00:07: ioport range 0x800-0x80f has been reserved
system 00:07: ioport range 0x1000-0x107f has been reserved
system 00:07: ioport range 0x1180-0x11bf has been reserved
system 00:07: iomem range 0xe0000000-0xefffffff has been reserved
system 00:07: iomem range 0xf0000000-0xf0003fff has been reserved
system 00:07: iomem range 0xf0004000-0xf0004fff has been reserved
system 00:07: iomem range 0xf0005000-0xf0005fff has been reserved
system 00:07: iomem range 0xf0008000-0xf000bfff has been reserved
system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:07: iomem range 0xfed45000-0xfed8ffff has been reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
pci 0000:00:1c.0: IO window: 0x3000-0x3fff
pci 0000:00:1c.0: MEM window: 0xb4000000-0xb7ffffff
pci 0000:00:1c.0: PREFETCH window: 0x000000d0000000-0x000000d3ffffff
pci 0000:06:01.0: CardBus bridge, secondary bus 0000:07
pci 0000:06:01.0: IO window: 0x004000-0x0040ff
pci 0000:06:01.0: IO window: 0x004400-0x0044ff
pci 0000:06:01.0: PREFETCH window: 0x80000000-0x83ffffff
pci 0000:06:01.0: MEM window: 0x8c000000-0x8fffffff
pci 0000:06:01.1: CardBus bridge, secondary bus 0000:08
pci 0000:06:01.1: IO window: 0x004800-0x0048ff
pci 0000:06:01.1: IO window: 0x004c00-0x004cff
pci 0000:06:01.1: PREFETCH window: 0x84000000-0x87ffffff
pci 0000:06:01.1: MEM window: 0x90000000-0x93ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
pci 0000:00:1e.0: IO window: 0x4000-0x4fff
pci 0000:00:1e.0: MEM window: 0xb8000000-0xb80fffff
pci 0000:00:1e.0: PREFETCH window: 0x80000000-0x87ffffff
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:06:01.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:06:01.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:02: resource 0 io: [0x3000-0x3fff]
pci_bus 0000:02: resource 1 mem: [0xb4000000-0xb7ffffff]
pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xd3ffffff]
pci_bus 0000:06: resource 0 io: [0x4000-0x4fff]
pci_bus 0000:06: resource 1 mem: [0xb8000000-0xb80fffff]
pci_bus 0000:06: resource 2 pref mem [0x80000000-0x87ffffff]
pci_bus 0000:06: resource 3 io: [0x00-0xffff]
pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff]
pci_bus 0000:07: resource 0 io: [0x4000-0x40ff]
pci_bus 0000:07: resource 1 io: [0x4400-0x44ff]
pci_bus 0000:07: resource 2 pref mem [0x80000000-0x83ffffff]
pci_bus 0000:07: resource 3 mem: [0x8c000000-0x8fffffff]
pci_bus 0000:08: resource 0 io: [0x4800-0x48ff]
pci_bus 0000:08: resource 1 io: [0x4c00-0x4cff]
pci_bus 0000:08: resource 2 pref mem [0x84000000-0x87ffffff]
pci_bus 0000:08: resource 3 mem: [0x90000000-0x93ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 6076k freed
Simple Boot Flag at 0x41 set to 0x1
audit: initializing netlink socket (disabled)
type=2000 audit(1571245481.633:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
NTFS driver 2.1.29 [Flags: R/W].
msgmni has been set to 1721
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
vesafb: framebuffer at 0xc0000000, mapped to 0xf7c80000, using 3072k, total 7872k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial 0000:00:1e.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
serial 0000:00:1e.3: PCI INT B disabled
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
Uniform Multi-Platform E-IDE driver
ide-cd driver 5.00
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: PCI INT B disabled
ahci: probe of 0000:00:1f.2 failed with error -22
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1890 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1898 irq 15
ieee1394: raw1394: /dev/raw1394 device initialized
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xb0040000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-1-mepis-smp ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
PNP: PS/2 Controller [PNP0303:K101,FJC6001:MOU1] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:08: RTC can wake from S4
rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
No iBFT detected.
TCP cubic registered
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
NET: Registered protocol family 17
Using IPI No-Shortcut mode
rtc_cmos 00:08: setting system clock to 2019-10-16 17:04:42 UTC (1571245482)
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
ata2.00: ATAPI: UJDA760 DVD/CDRW, 1.00, max UDMA/33
ata1.00: ATA-8: SAMSUNG SSD PM830 mSATA 32GB, CXM12D1Q, max UDMA/133
ata1.00: 62533296 sectors, multi 16: LBA48
ata2.00: configured for UDMA/33
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD PM83 CXM1 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 1:0:0:0: CD-ROM MATSHITA UJDA760 DVD/CDRW 1.00 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
Freeing unused kernel memory: 376k freed
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZC] (55 C)
agpgart-intel 0000:00:00.0: Intel 915GM Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
sky2 driver version 1.25
sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sky2 0000:02:00.0: setting latency timer to 64
sky2 0000:02:00.0: Yukon-2 EC chip revision 1
sky2 0000:02:00.0: irq 25 for MSI/MSI-X
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
uhci_hcd: USB Universal Host Controller Interface driver
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
ACPI: Power Button [PWRF]
sky2 eth0: addr 00:0b:97:96:26:50
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-1-mepis-smp uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-1-mepis-smp uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-1-mepis-smp uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:06:01.2: SDHCI controller found [1180:0822] (rev 11)
sdhci-pci 0000:06:01.2: PCI INT C -> GSI 19 (level, low) -> IRQ 19
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:06:01.2] using PIO
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
udev: starting version 151
intel_rng: FWH not detected
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
ACPI: AC Adapter [AC] (on-line)
Marking TSC unstable due to TSC halts in idle
processor LNXCPU:00: registered as cooling_device0
Switching to clocksource hpet
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx>
ACPI: Battery Slot [BATA] (battery present)
input: Panasonic Laptop Support as /devices/virtual/input/input6
ACPI: Battery Slot [BATB] (battery absent)
yenta_cardbus 0000:06:01.0: CardBus bridge found [10f7:8338]
parport_pc 00:0d: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 5 [PCSPP,TRISTATE]
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
input: PS/2 Touchpad as /devices/platform/i8042/serio1/input/input7
Intel ICH Modem 0000:00:1e.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Intel ICH Modem 0000:00:1e.3: setting latency timer to 64
yenta_cardbus 0000:06:01.0: ISA IRQ mask 0x0c98, PCI irq 20
yenta_cardbus 0000:06:01.0: Socket status: 30000820
yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x4fff: clean.
yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge Memory window: 0xb8000000 - 0xb80fffff
yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x87ffffff
ipw2200 0000:06:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
ipw2200 0000:06:02.0: firmware: requesting ipw2200-bss.fw
Intel ICH 0000:00:1e.2: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Intel ICH 0000:00:1e.2: setting latency timer to 64
input: LBPS/2 Fujitsu Lifebook TouchScreen as /devices/platform/i8042/serio1/input/input8
ipw2200: Detected geography ZZA (11 802.11bg channels, 13 802.11a channels)
yenta_cardbus 0000:06:01.1: CardBus bridge found [10f7:8338]
yenta_cardbus 0000:06:01.1: ISA IRQ mask 0x0c98, PCI irq 21
yenta_cardbus 0000:06:01.1: Socket status: 30000820
pci_bus 0000:06: Raising subordinate bus# of parent bus (#06) from #08 to #0b
yenta_cardbus 0000:06:01.1: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x4000-0x4fff: clean.
yenta_cardbus 0000:06:01.1: pcmcia: parent PCI bridge Memory window: 0xb8000000 - 0xb80fffff
yenta_cardbus 0000:06:01.1: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x87ffffff
pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
pci 0000:07:00.0: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:07:00.0: PME# disabled
pci 0000:07:00.1: reg 10 32bit mmio: [0x000000-0x000fff]
pci 0000:07:00.1: supports D1 D2
pci 0000:07:00.1: PME# supported from D0 D1 D2 D3hot
pci 0000:07:00.1: PME# disabled
pci 0000:07:00.2: reg 10 32bit mmio: [0x000000-0x0000ff]
pci 0000:07:00.2: supports D1 D2
pci 0000:07:00.2: PME# supported from D0 D1 D2 D3hot
pci 0000:07:00.2: PME# disabled
ehci_hcd 0000:07:00.2: enabling device (0000 -> 0002)
ehci_hcd 0000:07:00.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:07:00.2: EHCI Host Controller
ehci_hcd 0000:07:00.2: new USB bus registered, assigned bus number 5
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:07:00.0: enabling device (0000 -> 0002)
ohci_hcd 0000:07:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:07:00.0: setting latency timer to 64
ohci_hcd 0000:07:00.0: OHCI Host Controller
ohci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 6
ohci_hcd 0000:07:00.0: irq 20, io mem 0x8c000000
ehci_hcd 0000:07:00.2: irq 20, io mem 0x8c002000
ehci_hcd 0000:07:00.2: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 2.6.32-1-mepis-smp ehci_hcd
usb usb5: SerialNumber: 0000:07:00.2
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 5 ports detected
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI Host Controller
usb usb6: Manufacturer: Linux 2.6.32-1-mepis-smp ohci_hcd
usb usb6: SerialNumber: 0000:07:00.0
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci_hcd 0000:07:00.1: enabling device (0000 -> 0002)
ohci_hcd 0000:07:00.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:07:00.1: setting latency timer to 64
ohci_hcd 0000:07:00.1: OHCI Host Controller
ohci_hcd 0000:07:00.1: new USB bus registered, assigned bus number 7
ohci_hcd 0000:07:00.1: irq 20, io mem 0x8c001000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI Host Controller
usb usb7: Manufacturer: Linux 2.6.32-1-mepis-smp ohci_hcd
usb usb7: SerialNumber: 0000:07:00.1
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
intel8x0_measure_ac97_clock: measured 52774 usecs (2543 samples)
intel8x0: clocking to 48000
pcmcia_socket pcmcia_socket1: pccard: CardBus card inserted into slot 1
pci 0000:08:00.0: reg 10 32bit mmio: [0x000000-0x00ffff]
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
(5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
ath5k 0000:08:00.0: enabling device (0000 -> 0002)
ath5k 0000:08:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
ath5k 0000:08:00.0: registered as 'phy0'
usb 7-1: new full speed USB device using ohci_hcd and address 2
usb 7-1: New USB device found, idVendor=046d, idProduct=c52f
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-1: Product: USB Receiver
usb 7-1: Manufacturer: Logitech
usb 7-1: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1e.0/0000:06:01.0/0000:07:00.1/usb7/7-1/7-1:1.0/input/input9
generic-usb 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:07:00.1-1/input0
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1e.0/0000:06:01.0/0000:07:00.1/usb7/7-1/7-1:1.1/input/input10
generic-usb 0003:046D:C52F.0002: input,hiddev96,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:07:00.1-1/input1
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
ath: EEPROM regdomain: 0x0
ath: EEPROM indicates default country code should be used
ath: doing EEPROM country->regdmn map search
ath: country maps to regdmn code: 0x3a
ath: Country alpha2 being used: US
ath: Regpair used: 0x3a
phy0: Selected rate control algorithm 'minstrel'
ath5k phy0: Atheros AR5213A chip found (MAC: 0x59, PHY: 0x43)
ath5k phy0: RF5112B multiband radio found (0x36)
cfg80211: Calling CRDA for country: US
EXT3 FS on sda2, internal journal
Adding 2882552k swap on /dev/sda3. Priority:1 extents:1 across:2882552k SS
fuse init (API version 7.13)
sky2 eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
usb 1-1: new high speed USB device using ehci_hcd and address 2
usb 1-1: New USB device found, idVendor=1aa6, idProduct=0201
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: Pen Drive
usb 1-1: Manufacturer: eFortune
usb 1-1: SerialNumber: 5940314711321
usb 1-1: configuration #1 chosen from 1 choice
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usb-storage: device scan complete
scsi 2:0:0:0: Direct-Access eFortune Pen Drive 1.00 PQ: 0 ANSI: 0 CCS
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 2:0:0:0: [sdb] 1990656 512-byte logical blocks: (1.01 GB/972 MiB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 2:0:0:0: [sdb] Assuming drive cache: write through
sd 2:0:0:0: [sdb] Attached SCSI removable disk

lspci -vvv
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04)
Subsystem: Matsushita Electric Industrial Co., Ltd. Device 8338
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=09 <?>
Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04) (prog-if 00 [VGA controller])
Subsystem: Matsushita Electric Industrial Co., Ltd. Device 8338
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at b0080000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 1800 [size=8]
Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at b0000000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
Subsystem: Matsushita Electric Industrial Co., Ltd. Device 8338
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at 88000000 (32-bit, non-prefetchable) [disabled] [size=512K]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: b4000000-b7ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag+ RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #2, PowerLimit 6.500W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: fee0100c Data: 4161
Capabilities: [90] Subsystem: Matsushita Electric Industrial Co., Ltd. Device 8338
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=01 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c001
Kernel driver in use: pcieport

00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04) (prog-if 00 [UHCI])
Subsystem: Matsushita Electric Industrial Co., Ltd. Device 8338
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd

00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04) (prog-if 00 [UHCI])
Subsystem: Matsushita Electric Industrial Co., Ltd. Device 8338
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd

00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04) (prog-if 00 [UHCI])
Subsystem: Matsushita Electric Industrial Co., Ltd. Device 8338
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd

00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04) (prog-if 20 [EHCI])
Subsystem: Matsushita Electric Industrial Co., Ltd. Device 8338
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at b0040000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=0b, sec-latency=32
I/O behind bridge: 00004000-00004fff
Memory behind bridge: b8000000-b80fffff
Prefetchable memory behind bridge: 0000000080000000-0000000087ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Matsushita Electric Industrial Co., Ltd. Device 8338

00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04)
Subsystem: Matsushita Electric Industrial Co., Ltd. Device 834c
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 1c00 [size=256]
Region 1: I/O ports at 18c0 [size=64]
Region 2: Memory at b0040800 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at b0040400 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: Intel ICH

00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 04) (prog-if 00 [Generic])
Subsystem: Matsushita Electric Industrial Co., Ltd. Device 8338
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 2400 [size=256]
Region 1: I/O ports at 2000 [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: Intel ICH Modem

00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
Subsystem: Matsushita Electric Industrial Co., Ltd. Device 8338
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0

00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 04) (prog-if 80 [Master])
Subsystem: Matsushita Electric Industrial Co., Ltd. Device 8338
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1890 [size=16]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ata_piix

00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
Subsystem: Matsushita Electric Industrial Co., Ltd. Device 8338
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 9
Region 4: I/O ports at 18a0 [size=32]

02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 19)
Subsystem: Matsushita Electric Industrial Co., Ltd. Marvell 88E8053 Gigabit Ethernet Controller (Panasonic)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 25
Region 0: Memory at b4000000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at 3000 [size=256]
[virtual] Expansion ROM at d0000000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Product Name: Marvell Yukon 88E8053 Gigabit Ethernet Controller
Read-only fields:
[PN] Part number: Yukon 88E8053
[EC] Engineering changes: Rev. 1.9
[MN] Manufacture ID: 4d 61 72 76 65 6c 6c
[SN] Serial number: AbCdEfG962650
[CP] Extended capability: 01 10 cc 03
[RV] Reserved: checksum good, 9 byte(s) reserved
Read/write fields:
[RW] Read-write area: 121 byte(s) free
End
Capabilities: [5c] MSI: Enable+ Count=1/2 Maskable- 64bit+
Address: 00000000fee0100c Data: 4181
Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr+ NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <256ns, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 1f, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: sky2

06:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 8b)
Subsystem: Matsushita Electric Industrial Co., Ltd. Panasonic CF-Y5 laptop
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 20
Region 0: Memory at b8002000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=06, secondary=07, subordinate=07, sec-latency=176
Memory window 0: 80000000-83fff000 (prefetchable)
Memory window 1: 8c000000-8ffff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus

06:01.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 8b)
Subsystem: Matsushita Electric Industrial Co., Ltd. Panasonic CF-Y5 laptop
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin B routed to IRQ 21
Region 0: Memory at b8003000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=06, secondary=08, subordinate=0b, sec-latency=176
Memory window 0: 84000000-87fff000 (prefetchable)
Memory window 1: 90000000-93fff000
I/O window 0: 00004800-000048ff
I/O window 1: 00004c00-00004cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus

06:01.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 11)
Subsystem: Matsushita Electric Industrial Co., Ltd. Panasonic CF-Y5 laptop
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin C routed to IRQ 19
Region 0: Memory at b8000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: sdhci-pci

06:02.0 Network controller: Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection (rev 05)
Subsystem: Intel Corporation Device 1000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 6000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at b8001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Kernel driver in use: ipw2200

07:00.0 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI])
Subsystem: Adaptec Device 1235
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (250ns min, 10500ns max)
Interrupt: pin A routed to IRQ 20
Region 0: Memory at 8c000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd

07:00.1 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI])
Subsystem: Adaptec Device 1235
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (250ns min, 10500ns max)
Interrupt: pin B routed to IRQ 20
Region 0: Memory at 8c001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd

07:00.2 USB Controller: NEC Corporation USB 2.0 (rev 04) (prog-if 20 [EHCI])
Subsystem: Adaptec Device 12e0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 68 (4000ns min, 8500ns max), Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 20
Region 0: Memory at 8c002000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd

08:00.0 Ethernet controller: Atheros Communications Inc. Atheros AR5001X+ Wireless Network Adapter (rev 01)
Subsystem: Atheros Communications Inc. Ubiquiti Networks SuperRange a/b/g Cardbus Adapter
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168 (2500ns min, 7000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 21
Region 0: Memory at 90000000 (32-bit, non-prefetchable) [size=64K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: ath5k

lspcmcia -v -v
Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:06:01.0)
Configuration: state: on ready: yes
Voltage: 3.3V Vcc: 3.3V Vpp: 3.3V
Available IRQs: 3, 4, 7, 10, 11
Available ioports: 0x00000100 - 0x000003af
0x000003e0 - 0x000004cf
0x000004d8 - 0x000004ff
0x00000820 - 0x000008ff
0x00000a00 - 0x00000aff
0x00000c00 - 0x00000cf7
0x00004000 - 0x00004fff
Available iomem: 0x000c0000 - 0x000fffff
0x60000000 - 0x60ffffff
0x80000000 - 0x87ffffff
0xa0000000 - 0xa0ffffff
0xb8000000 - 0xb80fffff
CardBus card -- see "lspci" for more information
Socket 1 Bridge: [yenta_cardbus] (bus ID: 0000:06:01.1)
Configuration: state: on ready: yes
Voltage: 3.3V Vcc: 3.3V Vpp: 3.3V
Available IRQs: 3, 4, 7, 10, 11
Available ioports: 0x00000100 - 0x000003af
0x000003e0 - 0x000004cf
0x000004d8 - 0x000004ff
0x00000820 - 0x000008ff
0x00000a00 - 0x00000aff
0x00000c00 - 0x00000cf7
0x00004000 - 0x00004fff
Available iomem: 0x000c0000 - 0x000fffff
0x60000000 - 0x60ffffff
0x80000000 - 0x87ffffff
0xa0000000 - 0xa0ffffff
0xb8000000 - 0xb80fffff
CardBus card -- see "lspci" for more information
Panasonic CF-29 MK5 - Top PCMCIA (CardBUS) slot does not work.
Top slot contains a Ubiquity SuperRange Cardbus WiFi card.
Bottom slot contains an Adaptec USB2connect 2 port USB card.

uname -a
Linux antix1 4.9.160-antix.2-486-smp #1 SMP Wed Feb 27 14:42:39 EET 2019 i686 GNU/Linux

dmesg
[ 0.216496] pci 0000:00:1e.2: reg 0x18: [mem 0xb0040800-0xb00409ff]
[ 0.216506] pci 0000:00:1e.2: reg 0x1c: [mem 0xb0040400-0xb00404ff]
[ 0.216556] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[ 0.216675] pci 0000:00:1e.3: [8086:266d] type 00 class 0x070300
[ 0.216690] pci 0000:00:1e.3: reg 0x10: [io 0x2400-0x24ff]
[ 0.216700] pci 0000:00:1e.3: reg 0x14: [io 0x2000-0x207f]
[ 0.216764] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
[ 0.216877] pci 0000:00:1e.3: System wakeup disabled by ACPI
[ 0.216957] pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100
[ 0.217048] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.217057] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.217062] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.217067] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0900-097f
[ 0.217186] pci 0000:00:1f.2: [8086:2653] type 00 class 0x010180
[ 0.217202] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]
[ 0.217211] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]
[ 0.217221] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]
[ 0.217230] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]
[ 0.217239] pci 0000:00:1f.2: reg 0x20: [io 0x1890-0x189f]
[ 0.217259] pci 0000:00:1f.2: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
[ 0.217261] pci 0000:00:1f.2: legacy IDE quirk: reg 0x14: [io 0x03f6]
[ 0.217263] pci 0000:00:1f.2: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
[ 0.217266] pci 0000:00:1f.2: legacy IDE quirk: reg 0x1c: [io 0x0376]
[ 0.217292] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.217411] pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
[ 0.217467] pci 0000:00:1f.3: reg 0x20: [io 0x18a0-0x18bf]
[ 0.217702] pci 0000:02:00.0: [11ab:4362] type 00 class 0x020000
[ 0.217732] pci 0000:02:00.0: reg 0x10: [mem 0xb4000000-0xb4003fff 64bit]
[ 0.217745] pci 0000:02:00.0: reg 0x18: [io 0x3000-0x30ff]
[ 0.217793] pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[ 0.217868] pci 0000:02:00.0: supports D1 D2
[ 0.217871] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.217971] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.217983] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.217988] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.217993] pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xb7ffffff]
[ 0.218005] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd3ffffff 64bit pref]
[ 0.218080] pci 0000:06:01.0: [1180:0476] type 02 class 0x060700
[ 0.218097] pci 0000:06:01.0: proprietary Ricoh MMC controller disabled (via cardbus function)
[ 0.218099] pci 0000:06:01.0: MMC cards are now supported by standard SDHCI controller
[ 0.218113] pci 0000:06:01.0: reg 0x10: [mem 0xb8000000-0xb8000fff]
[ 0.218149] pci 0000:06:01.0: supports D1 D2
[ 0.218151] pci 0000:06:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.218248] pci 0000:06:01.1: [1180:0822] type 00 class 0x080500
[ 0.218267] pci 0000:06:01.1: reg 0x10: [mem 0xb8002000-0xb80020ff]
[ 0.218355] pci 0000:06:01.1: supports D1 D2
[ 0.218357] pci 0000:06:01.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.218455] pci 0000:06:02.0: [8086:4223] type 00 class 0x028000
[ 0.218474] pci 0000:06:02.0: reg 0x10: [mem 0xb8003000-0xb8003fff]
[ 0.218567] pci 0000:06:02.0: PME# supported from D0 D3hot D3cold
[ 0.218680] pci 0000:00:1e.0: PCI bridge to [bus 06-08] (subtractive decode)
[ 0.218687] pci 0000:00:1e.0: bridge window [mem 0xb8000000-0xb80fffff]
[ 0.218693] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.218696] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.218759] pci_bus 0000:07: busn_res: [bus 07-08] end is updated to 07
[ 0.218776] pci_bus 0000:00: on NUMA node 0
[ 0.222118] ACPI: PCI Interrupt Link [LNKA] (IRQs *9)
[ 0.222207] ACPI: PCI Interrupt Link [LNKB] (IRQs *9)
[ 0.222294] ACPI: PCI Interrupt Link [LNKC] (IRQs *9)
[ 0.222380] ACPI: PCI Interrupt Link [LNKD] (IRQs *9)
[ 0.222466] ACPI: PCI Interrupt Link [LNKE] (IRQs *9)
[ 0.222552] ACPI: PCI Interrupt Link [LNKF] (IRQs *9)
[ 0.222638] ACPI: PCI Interrupt Link [LNKG] (IRQs 9) *0, disabled.
[ 0.222726] ACPI: PCI Interrupt Link [LNKH] (IRQs *9)
[ 0.238131] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.238227] ACPI : EC: interrupt unblocked
[ 0.238235] ACPI : EC: event unblocked
[ 0.238242] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1d, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.238244] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.238340] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.238343] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.238347] vgaarb: loaded
[ 0.238349] vgaarb: bridge control possible 0000:00:02.0
[ 0.238496] SCSI subsystem initialized
[ 0.238548] libata version 3.00 loaded.
[ 0.238590] ACPI: bus type USB registered
[ 0.238628] usbcore: registered new interface driver usbfs
[ 0.238646] usbcore: registered new interface driver hub
[ 0.238666] usbcore: registered new device driver usb
[ 0.238790] PCI: Using ACPI for IRQ routing
[ 0.245937] PCI: pci_cache_line_size set to 64 bytes
[ 0.245989] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
[ 0.245991] e820: reserve RAM buffer [mem 0x7f6e0000-0x7fffffff]
[ 0.246186] NetLabel: Initializing
[ 0.246188] NetLabel: domain hash size = 128
[ 0.246189] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.246213] NetLabel: unlabeled traffic allowed by default
[ 0.246490] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.246497] hpet clockevent registered
[ 0.246502] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.246507] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.246513] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.248064] clocksource: Switched to clocksource hpet
[ 0.254603] VFS: Disk quotas dquot_6.6.0
[ 0.254638] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.257645] pnp: PnP ACPI init
[ 0.264407] system 00:00: [mem 0x000cf200-0x000cf7ff] has been reserved
[ 0.264410] system 00:00: [mem 0x000d0800-0x000d3fff] has been reserved
[ 0.264417] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.266049] system 00:01: [io 0x0900-0x091f] has been reserved
[ 0.266052] system 00:01: [io 0x092c-0x097f] has been reserved
[ 0.266055] system 00:01: [io 0xfe00-0xfe01] has been reserved
[ 0.266058] system 00:01: [io 0x0920-0x092b] has been reserved
[ 0.266062] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.266066] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.275394] system 00:02: [io 0x02e0-0x02e7] has been reserved
[ 0.275397] system 00:02: [io 0x0330-0x0337] has been reserved
[ 0.275401] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.275617] system 00:03: [io 0x0800-0x080f] has been reserved
[ 0.275620] system 00:03: [io 0x1000-0x107f] has been reserved
[ 0.275623] system 00:03: [io 0x1180-0x11bf] has been reserved
[ 0.275627] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.275630] system 00:03: [mem 0xf0000000-0xf0003fff] has been reserved
[ 0.275633] system 00:03: [mem 0xf0004000-0xf0004fff] has been reserved
[ 0.275636] system 00:03: [mem 0xf0005000-0xf0005fff] has been reserved
[ 0.275639] system 00:03: [mem 0xf0008000-0xf000bfff] has been reserved
[ 0.275642] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.275645] system 00:03: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.275650] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.275760] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.276668] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.278125] pnp 00:06: Plug and Play ACPI device, IDs FJC6001 PNP0f13 (active)
[ 0.287579] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.320615] pnp 00:08: [dma 1]
[ 0.320650] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)
[ 0.325057] pnp: PnP ACPI: found 9 devices
[ 0.359630] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.359667] pci 0000:06:01.0: res[13]=[io 0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[ 0.359671] pci 0000:06:01.0: res[14]=[io 0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[ 0.359675] pci 0000:00:1e.0: bridge window [io 0x1000-0x0fff] to [bus 06-08] add_size 1000
[ 0.359684] pci 0000:00:1e.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.359687] pci 0000:00:1e.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.359696] pci 0000:00:02.1: BAR 0: assigned [mem 0x80000000-0x8007ffff]
[ 0.359703] pci 0000:00:1e.0: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.359708] pci 0000:02:00.0: BAR 6: assigned [mem 0xb4020000-0xb403ffff pref]
[ 0.359712] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.359716] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.359722] pci 0000:00:1c.0: bridge window [mem 0xb4000000-0xb7ffffff]
[ 0.359727] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xd3ffffff 64bit pref]
[ 0.359737] pci 0000:06:01.0: res[15]=[mem 0x04000000-0x03ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
[ 0.359741] pci 0000:06:01.0: res[15]=[mem 0x04000000-0x07ffffff pref] res_to_dev_res add_size 4000000 min_align 4000000
[ 0.359744] pci 0000:06:01.0: res[16]=[mem 0x04000000-0x03ffffff] res_to_dev_res add_size 4000000 min_align 4000000
[ 0.359747] pci 0000:06:01.0: res[16]=[mem 0x04000000-0x07ffffff] res_to_dev_res add_size 4000000 min_align 4000000
[ 0.359750] pci 0000:06:01.0: res[13]=[io 0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[ 0.359753] pci 0000:06:01.0: res[13]=[io 0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100
[ 0.359756] pci 0000:06:01.0: res[14]=[io 0x0100-0x00ff] res_to_dev_res add_size 100 min_align 100
[ 0.359760] pci 0000:06:01.0: res[14]=[io 0x0100-0x01ff] res_to_dev_res add_size 100 min_align 100
[ 0.359764] pci 0000:06:01.0: BAR 15: assigned [mem 0x84000000-0x87ffffff pref]
[ 0.359768] pci 0000:06:01.0: BAR 16: assigned [mem 0x88000000-0x8bffffff]
[ 0.359771] pci 0000:06:01.0: BAR 13: assigned [io 0x4000-0x40ff]
[ 0.359774] pci 0000:06:01.0: BAR 14: assigned [io 0x4400-0x44ff]
[ 0.359777] pci 0000:06:01.0: CardBus bridge to [bus 07]
[ 0.359780] pci 0000:06:01.0: bridge window [io 0x4000-0x40ff]
[ 0.359785] pci 0000:06:01.0: bridge window [io 0x4400-0x44ff]
[ 0.359790] pci 0000:06:01.0: bridge window [mem 0x84000000-0x87ffffff pref]
[ 0.359795] pci 0000:06:01.0: bridge window [mem 0x88000000-0x8bffffff]
[ 0.359800] pci 0000:00:1e.0: PCI bridge to [bus 06-08]
[ 0.359803] pci 0000:00:1e.0: bridge window [io 0x4000-0x4fff]
[ 0.359809] pci 0000:00:1e.0: bridge window [mem 0xb8000000-0xb80fffff]
[ 0.359819] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.359821] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.359824] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.359827] pci_bus 0000:02: resource 1 [mem 0xb4000000-0xb7ffffff]
[ 0.359829] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd3ffffff 64bit pref]
[ 0.359832] pci_bus 0000:06: resource 0 [io 0x4000-0x4fff]
[ 0.359835] pci_bus 0000:06: resource 1 [mem 0xb8000000-0xb80fffff]
[ 0.359837] pci_bus 0000:06: resource 4 [io 0x0000-0xffff]
[ 0.359840] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff]
[ 0.359843] pci_bus 0000:07: resource 0 [io 0x4000-0x40ff]
[ 0.359845] pci_bus 0000:07: resource 1 [io 0x4400-0x44ff]
[ 0.359848] pci_bus 0000:07: resource 2 [mem 0x84000000-0x87ffffff pref]
[ 0.359850] pci_bus 0000:07: resource 3 [mem 0x88000000-0x8bffffff]
[ 0.359972] NET: Registered protocol family 2
[ 0.360333] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.360368] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.360433] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.360506] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.360524] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.360602] NET: Registered protocol family 1
[ 0.360628] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.361398] PCI: CLS 32 bytes, default 64
[ 0.361499] Trying to unpack rootfs image as initramfs...
[ 1.057157] Freeing initrd memory: 23092K
[ 1.057615] simple-framebuffer simple-framebuffer.0: framebuffer at 0xc0000000, 0x180000 bytes, mapped to 0xf8200000
[ 1.057621] simple-framebuffer simple-framebuffer.0: format=r5g6b5, mode=1024x768x16, linelength=2048
[ 1.078097] Console: switching to colour frame buffer device 128x48
[ 1.098368] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[ 1.098766] audit: initializing netlink subsys (disabled)
[ 1.098804] audit: type=2000 audit(1571240824.097:1): initialized
[ 1.099170] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[ 1.102973] zbud: loaded
[ 1.103659] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.103815] ntfs: driver 2.1.32 [Flags: R/W].
[ 1.103932] fuse init (API version 7.26)
[ 1.104720] bounce: pool size: 64 pages
[ 1.104798] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.104847] io scheduler noop registered
[ 1.104849] io scheduler deadline registered
[ 1.104913] io scheduler cfq registered (default)
[ 1.105591] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.105601] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.105748] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.126461] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.127428] Linux agpgart interface v0.103
[ 1.127456] intel_idle: does not run on family 6 model 13
[ 1.127581] tsc: Marking TSC unstable due to TSC halts in idle
[ 1.127752] GHES: HEST is not enabled!
[ 1.133308] brd: module loaded
[ 1.135904] loop: module loaded
[ 1.136129] ahci 0000:00:1f.2: version 3.0
[ 1.136291] ahci 0000:00:1f.2: controller is in combined mode, can't enable AHCI mode
[ 1.136559] ata_piix 0000:00:1f.2: version 2.13
[ 1.136652] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 1.138172] scsi host0: ata_piix
[ 1.138328] scsi host1: ata_piix
[ 1.138405] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1890 irq 14
[ 1.138407] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1898 irq 15
[ 1.139052] libphy: Fixed MDIO Bus: probed
[ 1.139097] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.139098] ehci-pci: EHCI PCI platform driver
[ 1.139255] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.139266] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.139282] ehci-pci 0000:00:1d.7: debug port 1
[ 1.143204] ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
[ 1.143475] ehci-pci 0000:00:1d.7: irq 23, io mem 0xb0040000
[ 1.150018] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.150080] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.150083] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.150086] usb usb1: Product: EHCI Host Controller
[ 1.150088] usb usb1: Manufacturer: Linux 4.9.160-antix.2-486-smp ehci_hcd
[ 1.150091] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.150313] hub 1-0:1.0: USB hub found
[ 1.150324] hub 1-0:1.0: 6 ports detected
[ 1.150583] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.150590] ohci-pci: OHCI PCI platform driver
[ 1.150609] ohci-platform: OHCI generic platform driver
[ 1.150623] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.150737] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.150750] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.150776] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 1.150845] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.150848] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.150850] usb usb2: Product: UHCI Host Controller
[ 1.150853] usb usb2: Manufacturer: Linux 4.9.160-antix.2-486-smp uhci_hcd
[ 1.150855] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.151058] hub 2-0:1.0: USB hub found
[ 1.151069] hub 2-0:1.0: 2 ports detected
[ 1.151284] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.151291] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.151326] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 1.151390] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.151393] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.151396] usb usb3: Product: UHCI Host Controller
[ 1.151398] usb usb3: Manufacturer: Linux 4.9.160-antix.2-486-smp uhci_hcd
[ 1.151400] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.151567] hub 3-0:1.0: USB hub found
[ 1.151576] hub 3-0:1.0: 2 ports detected
[ 1.151808] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.151815] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.151848] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 1.151913] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.151916] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.151918] usb usb4: Product: UHCI Host Controller
[ 1.151920] usb usb4: Manufacturer: Linux 4.9.160-antix.2-486-smp uhci_hcd
[ 1.151922] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.152111] hub 4-0:1.0: USB hub found
[ 1.152120] hub 4-0:1.0: 2 ports detected
[ 1.152367] i8042: PNP: PS/2 Controller [PNP0303:K101,FJC6001:MOU1] at 0x60,0x64 irq 1,12
[ 1.154249] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.154256] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.154469] mousedev: PS/2 mouse device common for all mice
[ 1.154550] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.154576] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.154774] usbcore: registered new interface driver usbhid
[ 1.154775] usbhid: USB HID core driver
[ 1.154995] Key type dns_resolver registered
[ 1.155278] microcode: sig=0x6d8, pf=0x20, revision=0x20
[ 1.155323] microcode: Microcode Update Driver: v2.01 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 1.155328] Using IPI No-Shortcut mode
[ 1.155509] registered taskstats version 1
[ 1.155531] zswap: loaded using pool lzo/zbud
[ 1.159922] Key type encrypted registered
[ 1.159927] evm: HMAC attrs: 0x1
[ 1.160412] hd: no drives specified - use hd=cyl,head,sectors on kernel command line
[ 1.185718] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.299089] ata2.00: ATAPI: UJDA760 DVD/CDRW, 1.00, max UDMA/33
[ 1.299180] ata1.00: ATA-8: SAMSUNG SSD PM830 mSATA 32GB, CXM12D1Q, max UDMA/133
[ 1.299183] ata1.00: 62533296 sectors, multi 16: LBA48
[ 1.302195] ata2.00: configured for UDMA/33
[ 1.302255] ata1.00: configured for UDMA/133
[ 1.302469] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD PM83 2D1Q PQ: 0 ANSI: 5
[ 1.302783] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.302914] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 1.303022] sd 0:0:0:0: [sda] Write Protect is off
[ 1.303026] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.303058] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.304112] sda: sda1 sda2 sda3
[ 1.304746] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.305046] scsi 1:0:0:0: CD-ROM MATSHITA UJDA760 DVD/CDRW 1.00 PQ: 0 ANSI: 5
[ 1.328224] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.328226] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.328417] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.328575] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.328993] Freeing unused kernel memory: 644K
[ 1.329098] Write protecting the kernel text: 6808k
[ 1.329159] Write protecting the kernel read-only data: 2032k
[ 1.485972] udevd[107]: starting version 3.2.7
[ 1.486474] random: udevd: uninitialized urandom read (16 bytes read)
[ 1.486526] random: udevd: uninitialized urandom read (16 bytes read)
[ 1.488147] udevd[108]: starting eudev-3.2.7
[ 1.509833] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 1.521429] rtc_cmos 00:04: RTC can wake from S4
[ 1.521629] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.521665] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.533442] sky2: driver version 1.30
[ 1.533639] sky2 0000:02:00.0: Yukon-2 EC chip revision 1
[ 1.534101] sky2 0000:02:00.0 eth0: addr 00:0b:97:96:26:50
[ 1.542975] sdhci: Secure Digital Host Controller Interface driver
[ 1.542977] sdhci: Copyright(c) Pierre Ossman
[ 1.543652] sdhci-pci 0000:06:01.1: SDHCI controller found [1180:0822] (rev 11)
[ 1.545554] sdhci-pci 0000:06:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.546565] sdhci-pci 0000:06:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.549198] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.549200] ACPI: Thermal Zone [TZC] (36 C)
[ 1.555005] sdhci-pci 0000:06:01.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 1.558485] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.558698] mmc0: SDHCI controller on PCI [0000:06:01.1] using DMA
[ 1.612032] random: fast init done
[ 1.706009] raid6: mmxx1 gen() 1777 MB/s
[ 1.723009] raid6: mmxx2 gen() 1980 MB/s
[ 1.740056] raid6: sse1x1 gen() 1210 MB/s
[ 1.757012] raid6: sse1x2 gen() 1984 MB/s
[ 1.774032] raid6: sse2x1 gen() 2171 MB/s
[ 1.791010] raid6: sse2x1 xor() 1412 MB/s
[ 1.808009] raid6: sse2x2 gen() 2406 MB/s
[ 1.825027] raid6: sse2x2 xor() 1500 MB/s
[ 1.825028] raid6: using algorithm sse2x2 gen() 2406 MB/s
[ 1.825029] raid6: .... xor() 1500 MB/s, rmw enabled
[ 1.825031] raid6: using intx1 recovery algorithm
[ 1.825411] xor: measuring software checksum speed
[ 1.835007] pIII_sse : 4180.000 MB/sec
[ 1.845006] prefetch64-sse: 4552.000 MB/sec
[ 1.845008] xor: using function: prefetch64-sse (4552.000 MB/sec)
[ 1.855720] Btrfs loaded, crc32c=crc32c-generic, assert=on
[ 1.970335] input: LBPS/2 Fujitsu Lifebook Touchpad as /devices/platform/i8042/serio1/input/input3
[ 1.977510] PM: Starting manual resume from disk
[ 2.080029] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1701ea41ceb, max_idle_ns: 440795212314 ns
[ 2.132754] EXT4-fs (sda2): mounting ext3 file system using the ext4 subsystem
[ 2.144970] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.185315] input: LBPS/2 Fujitsu Lifebook TouchScreen as /devices/platform/i8042/serio1/input/input2
[ 2.527163] udevd[337]: starting version 3.2.7
[ 2.541053] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 2.541306] ata1.00: BMDMA stat 0x24
[ 2.541448] ata1.00: failed command: READ DMA
[ 2.541623] ata1.00: cmd c8/00:80:48:71:71/00:00:00:00:00/e0 tag 0 dma 65536 in
res 51/84:00:c7:71:71/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
[ 2.542210] ata1.00: status: { DRDY ERR }
[ 2.542365] ata1.00: error: { ICRC ABRT }
[ 2.542531] ata1: soft resetting link
[ 2.701229] ata1.00: configured for UDMA/133
[ 2.701246] ata1: EH complete
[ 2.717034] random: udevd: uninitialized urandom read (16 bytes read)
[ 2.717397] random: udevd: uninitialized urandom read (16 bytes read)
[ 2.717805] random: udevd: uninitialized urandom read (16 bytes read)
[ 2.722996] udevd[337]: specified group 'kvm' unknown
[ 2.761614] udevd[337]: starting eudev-3.2.7
[ 2.799360] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[ 2.809445] ACPI: Lid Switch [LID]
[ 2.812344] ACPI: AC Adapter [AC] (on-line)
[ 2.812540] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[ 2.812546] ACPI: Power Button [PWRB]
[ 2.812679] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 2.812682] ACPI: Power Button [PWRF]
[ 2.825652] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.826687] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 2.827514] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.876172] parport_pc 00:08: reported by Plug and Play ACPI
[ 2.876249] parport0: PC-style at 0x378 (0x778), irq 5, dma 1 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 2.879525] [drm] Initialized
[ 2.906465] ACPI: Battery Slot [BATA] (battery present)
[ 2.909822] ACPI: Battery Slot [BATB] (battery absent)
[ 2.910142] input: Panasonic Laptop Support as /devices/virtual/input/input8
[ 2.953934] yenta_cardbus 0000:06:01.0: CardBus bridge found [10f7:8338]
[ 3.003276] intel_rng: FWH not detected
[ 3.050868] lib80211: common routines for IEEE802.11 drivers
[ 3.050872] lib80211_crypt: registered algorithm 'NULL'
[ 3.052571] libipw: 802.11 data/management/control stack, git-1.1.13
[ 3.052572] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx>
[ 3.057368] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
[ 3.057369] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[ 3.080717] yenta_cardbus 0000:06:01.0: ISA IRQ mask 0x0c98, PCI irq 20
[ 3.080722] yenta_cardbus 0000:06:01.0: Socket status: 30000820
[ 3.080731] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge window: [io 0x4000-0x4fff]
[ 3.080734] yenta_cardbus 0000:06:01.0: pcmcia: parent PCI bridge window: [mem 0xb8000000-0xb80fffff]
[ 3.080738] pcmcia_socket pcmcia_socket0: cs: memory probe 0xb8000000-0xb80fffff:
[ 3.080743] excluding 0xb8000000-0xb800ffff
[ 3.089786] ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
[ 3.431515] ipw2200: Detected geography ZZA (11 802.11bg channels, 13 802.11a channels)
[ 3.465049] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 3.465316] ata1.00: BMDMA stat 0x24
[ 3.465458] ata1.00: failed command: READ DMA
[ 3.465656] ata1.00: cmd c8/00:00:00:63:6d/00:00:00:00:00/e0 tag 0 dma 131072 in
res 51/84:00:ff:63:6d/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
[ 3.466247] ata1.00: status: { DRDY ERR }
[ 3.466403] ata1.00: error: { ICRC ABRT }
[ 3.466569] ata1: soft resetting link
[ 3.629226] ata1.00: configured for UDMA/133
[ 3.629247] ata1: EH complete
[ 3.641050] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 3.641314] ata1.00: BMDMA stat 0x24
[ 3.641456] ata1.00: failed command: READ DMA
[ 3.641631] ata1.00: cmd c8/00:00:00:63:6d/00:00:00:00:00/e0 tag 0 dma 131072 in
res 51/84:00:ff:63:6d/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
[ 3.642222] ata1.00: status: { DRDY ERR }
[ 3.642399] ata1.00: error: { ICRC ABRT }
[ 3.642566] ata1: soft resetting link
[ 3.805269] ata1.00: configured for UDMA/133
[ 3.805288] ata1: EH complete
[ 3.810038] snd_intel8x0 0000:00:1e.2: intel8x0_measure_ac97_clock: measured 51252 usecs (2470 samples)
[ 3.810042] snd_intel8x0 0000:00:1e.2: clocking to 48000
[ 3.815167] pci 0000:00:00.0: Intel 915GM Chipset
[ 3.815226] pci 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 3.815929] pci 0000:00:00.0: detected 8192K stolen memory
[ 3.816238] [drm] Memory usable by graphics device = 256M
[ 3.816247] checking generic (c0000000 180000) vs hw (c0000000 10000000)
[ 3.816249] fb: switching to inteldrmfb from simple
[ 3.816352] Console: switching to colour dummy device 80x25
[ 3.816766] [drm] Replacing VGA console driver
[ 3.817606] ata1.00: limiting speed to UDMA/100:PIO4
[ 3.817615] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
[ 3.817638] ata1.00: BMDMA stat 0x24
[ 3.817655] ata1.00: failed command: READ DMA
[ 3.817683] ata1.00: cmd c8/00:00:00:63:6d/00:00:00:00:00/e0 tag 0 dma 131072 in
res 51/84:00:ff:63:6d/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
[ 3.817723] ata1.00: status: { DRDY ERR }
[ 3.817737] ata1.00: error: { ICRC ABRT }
[ 3.817764] ata1: soft resetting link
[ 3.817893] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.817896] [drm] Driver supports precise vblank timestamp query.
[ 3.818685] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.854502] [drm] RC6 disabled, disabling runtime PM support
[ 3.854547] [drm] initialized overlay support
[ 3.856669] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 3.860647] ------------[ cut here ]------------
[ 3.860778] WARNING: CPU: 0 PID: 6 at drivers/gpu/drm/i915/intel_display.c:12927 intel_atomic_check+0xcaa/0x1130 [i915]
[ 3.860780] WARN_ON(!connector_state->crtc)
[ 3.860782] Modules linked in:
[ 3.860784] evdev joydev input_leds serio_raw pcmcia ipw2200 libipw lib80211 cfg80211 lpc_ich rfkill rng_core snd_intel8x0m snd_intel8x0 snd_ac97_codec i915 ac97_bus snd_pcm yenta_socket pcmcia_rsrc pcmcia_core snd_timer snd soundcore drm_kms_helper parport_pc parport drm i2c_algo_bit fb_sys_fops syscopyarea sysfillrect intel_agp sysimgblt panasonic_laptop intel_gtt sparse_keymap shpchp battery video acpi_cpufreq tpm_tis ac tpm_tis_core tpm button btrfs xor raid6_pq psmouse i2c_i801 i2c_smbus sdhci_pci sdhci mmc_core sky2 thermal rtc_cmos fjes
[ 3.860852] CPU: 0 PID: 6 Comm: kworker/u4:0 Not tainted 4.9.160-antix.2-486-smp #1
[ 3.860854] Hardware name: Matsushita Electric Industrial Co.,Ltd. CF-29N3LGZBM/CF29-5, BIOS V5.00L11 12/20/2005
[ 3.860862] Workqueue: events_unbound async_run_entry_fn
[ 3.860865] 0000327f c1360ff2 f48c9c38 00000000 c1052c52 f8be1828 f48c9c50 00000006
[ 3.860873] f8bcfb24 0000327f f8b6daea f8b6daea 00000009 00000000 f49f7d80 f4a5b800
[ 3.860881] f6123c00 c1052cab 00000009 00000000 f48c9c38 f8be1828 f48c9c50 f8b6daea
[ 3.860889] Call Trace:
[ 3.860899] [<c1360ff2>] ? dump_stack+0x55/0x73
[ 3.860903] [<c1052c52>] ? __warn+0xe2/0x100
[ 3.860980] [<f8b6daea>] ? intel_atomic_check+0xcaa/0x1130 [i915]
[ 3.861031] [<f8b6daea>] ? intel_atomic_check+0xcaa/0x1130 [i915]
[ 3.861031] [<c1052cab>] ? warn_slowpath_fmt+0x3b/0x40
[ 3.861031] [<f8b6daea>] ? intel_atomic_check+0xcaa/0x1130 [i915]
[ 3.861031] [<f87b4f44>] ? drm_atomic_check_only+0x324/0x6b0 [drm]
[ 3.861031] [<c113ea93>] ? kmemdup+0x23/0x30
[ 3.861031] [<f87b52de>] ? drm_atomic_commit+0xe/0x50 [drm]
[ 3.861031] [<f8b7154e>] ? intel_get_load_detect_pipe+0x44e/0x660 [i915]
[ 3.861031] [<f8b8ba54>] ? intel_crt_detect+0x234/0x940 [i915]
[ 3.861031] [<f87ab194>] ? drm_mode_debug_printmodeline+0x84/0x90 [drm]
[ 3.861031] [<f8857f9d>] ? drm_helper_probe_single_connector_modes+0x42d/0x550 [drm_kms_helper]
[ 3.861031] [<f8857b70>] ? drm_kms_helper_poll_enable_locked+0xf0/0xf0 [drm_kms_helper]
[ 3.861031] [<f8865cf9>] ? drm_fb_helper_initial_config+0x79/0x425 [drm_kms_helper]
[ 3.861031] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 3.861031] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 3.861031] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 3.861031] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 3.861031] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 3.861031] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 3.861031] [<c101866f>] ? __switch_to+0xef/0x380
[ 3.861031] [<f8b88620>] ? intel_fbdev_fini+0xd0/0xd0 [i915]
[ 3.861031] [<f8b8862e>] ? intel_fbdev_initial_config+0xe/0x30 [i915]
[ 3.861031] [<c1070f83>] ? async_run_entry_fn+0x33/0xd0
[ 3.861031] [<c1069431>] ? process_one_work+0x191/0x3e0
[ 3.861031] [<c10696b7>] ? worker_thread+0x37/0x4e0
[ 3.861031] [<c1069680>] ? process_one_work+0x3e0/0x3e0
[ 3.861031] [<c106e644>] ? kthread+0xa4/0xc0
[ 3.861031] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 3.861031] [<c106e5a0>] ? kthread_park+0x50/0x50
[ 3.861031] [<c16a3240>] ? ret_from_fork+0x30/0x40
[ 3.861595] ---[ end trace e96a1a7a1ce213df ]---
[ 3.864512] ------------[ cut here ]------------
[ 3.864598] WARNING: CPU: 0 PID: 6 at drivers/gpu/drm/i915/intel_display.c:13556 intel_atomic_commit_tail+0xe20/0xf60 [i915]
[ 3.864600] encoder's enabled state mismatch (expected 0, found 1)
[ 3.864602] Modules linked in: evdev joydev input_leds serio_raw pcmcia ipw2200 libipw lib80211 cfg80211 lpc_ich rfkill rng_core snd_intel8x0m snd_intel8x0 snd_ac97_codec i915 ac97_bus snd_pcm yenta_socket pcmcia_rsrc pcmcia_core snd_timer snd soundcore drm_kms_helper parport_pc parport drm i2c_algo_bit fb_sys_fops syscopyarea sysfillrect intel_agp sysimgblt panasonic_laptop intel_gtt sparse_keymap shpchp battery video acpi_cpufreq tpm_tis ac tpm_tis_core tpm button btrfs xor raid6_pq psmouse i2c_i801 i2c_smbus sdhci_pci sdhci mmc_core sky2 thermal rtc_cmos fjes
[ 3.864659] CPU: 0 PID: 6 Comm: kworker/u4:0 Tainted: G W 4.9.160-antix.2-486-smp #1
[ 3.864661] Hardware name: Matsushita Electric Industrial Co.,Ltd. CF-29N3LGZBM/CF29-5, BIOS V5.00L11 12/20/2005
[ 3.864666] Workqueue: events_unbound async_run_entry_fn
[ 3.864669] 000034f4 c1360ff2 f48c9c20 00000000 c1052c52 f8bd314c f48c9c38 00000006
[ 3.864675] f8bcfb24 000034f4 f8b6c380 f8b6c380 00000009 00000001 f49f7d80 f6140224
[ 3.864682] f6140000 c1052cab 00000009 00000000 f48c9c20 f8bd314c f48c9c38 f8b6c380
[ 3.864689] Call Trace:
[ 3.864696] [<c1360ff2>] ? dump_stack+0x55/0x73
[ 3.864699] [<c1052c52>] ? __warn+0xe2/0x100
[ 3.864764] [<f8b6c380>] ? intel_atomic_commit_tail+0xe20/0xf60 [i915]
[ 3.864828] [<f8b6c380>] ? intel_atomic_commit_tail+0xe20/0xf60 [i915]
[ 3.864831] [<c1052cab>] ? warn_slowpath_fmt+0x3b/0x40
[ 3.864895] [<f8b6c380>] ? intel_atomic_commit_tail+0xe20/0xf60 [i915]
[ 3.864904] [<f8861444>] ? drm_atomic_helper_setup_commit+0x2e4/0x370 [drm_kms_helper]
[ 3.864912] [<f885e324>] ? drm_atomic_helper_prepare_planes+0x54/0x110 [drm_kms_helper]
[ 3.864976] [<f8b6c7ee>] ? intel_atomic_commit+0x32e/0x4b0 [i915]
[ 3.865041] [<f8b6c4c0>] ? intel_atomic_commit_tail+0xf60/0xf60 [i915]
[ 3.865056] [<f87b5316>] ? drm_atomic_commit+0x46/0x50 [drm]
[ 3.865121] [<f8b7154e>] ? intel_get_load_detect_pipe+0x44e/0x660 [i915]
[ 3.865187] [<f8b8ba54>] ? intel_crt_detect+0x234/0x940 [i915]
[ 3.865201] [<f87ab194>] ? drm_mode_debug_printmodeline+0x84/0x90 [drm]
[ 3.865208] [<f8857f9d>] ? drm_helper_probe_single_connector_modes+0x42d/0x550 [drm_kms_helper]
[ 3.865215] [<f8857b70>] ? drm_kms_helper_poll_enable_locked+0xf0/0xf0 [drm_kms_helper]
[ 3.865221] [<f8865cf9>] ? drm_fb_helper_initial_config+0x79/0x425 [drm_kms_helper]
[ 3.865225] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 3.865227] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 3.865230] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 3.865232] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 3.865235] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 3.865237] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 3.865242] [<c101866f>] ? __switch_to+0xef/0x380
[ 3.865306] [<f8b88620>] ? intel_fbdev_fini+0xd0/0xd0 [i915]
[ 3.865369] [<f8b8862e>] ? intel_fbdev_initial_config+0xe/0x30 [i915]
[ 3.865372] [<c1070f83>] ? async_run_entry_fn+0x33/0xd0
[ 3.865375] [<c1069431>] ? process_one_work+0x191/0x3e0
[ 3.865378] [<c10696b7>] ? worker_thread+0x37/0x4e0
[ 3.865381] [<c1069680>] ? process_one_work+0x3e0/0x3e0
[ 3.865385] [<c106e644>] ? kthread+0xa4/0xc0
[ 3.865387] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 3.865391] [<c106e5a0>] ? kthread_park+0x50/0x50
[ 3.865393] [<c16a3240>] ? ret_from_fork+0x30/0x40
[ 3.865420] ---[ end trace e96a1a7a1ce213e0 ]---
[ 3.865423] ------------[ cut here ]------------
[ 3.865488] WARNING: CPU: 0 PID: 6 at drivers/gpu/drm/i915/intel_display.c:13564 intel_atomic_commit_tail+0xf14/0xf60 [i915]
[ 3.865490] encoder detached but still enabled on pipe B.
[ 3.865490] Modules linked in: evdev joydev input_leds serio_raw pcmcia ipw2200 libipw lib80211 cfg80211 lpc_ich rfkill rng_core snd_intel8x0m snd_intel8x0 snd_ac97_codec i915 ac97_bus snd_pcm yenta_socket pcmcia_rsrc pcmcia_core snd_timer snd soundcore drm_kms_helper parport_pc parport drm i2c_algo_bit fb_sys_fops syscopyarea sysfillrect intel_agp sysimgblt panasonic_laptop intel_gtt sparse_keymap shpchp battery video acpi_cpufreq tpm_tis ac tpm_tis_core tpm button btrfs xor raid6_pq psmouse i2c_i801 i2c_smbus sdhci_pci sdhci mmc_core sky2 thermal rtc_cmos fjes
[ 3.865538] CPU: 0 PID: 6 Comm: kworker/u4:0 Tainted: G W 4.9.160-antix.2-486-smp #1
[ 3.865540] Hardware name: Matsushita Electric Industrial Co.,Ltd. CF-29N3LGZBM/CF29-5, BIOS V5.00L11 12/20/2005
[ 3.865543] Workqueue: events_unbound async_run_entry_fn
[ 3.865544] 000034fc c1360ff2 f48c9c20 00000000 c1052c52 f8bd3188 f48c9c38 00000006
[ 3.865551] f8bcfb24 000034fc f8b6c474 f8b6c474 00000009 00000001 f49f7d80 f6140224
[ 3.865558] f6140000 c1052cab 00000009 00000000 f48c9c20 f8bd3188 f48c9c38 f8b6c474
[ 3.865564] Call Trace:
[ 3.865568] [<c1360ff2>] ? dump_stack+0x55/0x73
[ 3.865571] [<c1052c52>] ? __warn+0xe2/0x100
[ 3.865636] [<f8b6c474>] ? intel_atomic_commit_tail+0xf14/0xf60 [i915]
[ 3.865699] [<f8b6c474>] ? intel_atomic_commit_tail+0xf14/0xf60 [i915]
[ 3.865702] [<c1052cab>] ? warn_slowpath_fmt+0x3b/0x40
[ 3.865766] [<f8b6c474>] ? intel_atomic_commit_tail+0xf14/0xf60 [i915]
[ 3.865774] [<f8861444>] ? drm_atomic_helper_setup_commit+0x2e4/0x370 [drm_kms_helper]
[ 3.865838] [<f8b6c7ee>] ? intel_atomic_commit+0x32e/0x4b0 [i915]
[ 3.865903] [<f8b6c4c0>] ? intel_atomic_commit_tail+0xf60/0xf60 [i915]
[ 3.865917] [<f87b5316>] ? drm_atomic_commit+0x46/0x50 [drm]
[ 3.865981] [<f8b7154e>] ? intel_get_load_detect_pipe+0x44e/0x660 [i915]
[ 3.866047] [<f8b8ba54>] ? intel_crt_detect+0x234/0x940 [i915]
[ 3.866061] [<f87ab194>] ? drm_mode_debug_printmodeline+0x84/0x90 [drm]
[ 3.866068] [<f8857f9d>] ? drm_helper_probe_single_connector_modes+0x42d/0x550 [drm_kms_helper]
[ 3.866075] [<f8857b70>] ? drm_kms_helper_poll_enable_locked+0xf0/0xf0 [drm_kms_helper]
[ 3.866081] [<f8865cf9>] ? drm_fb_helper_initial_config+0x79/0x425 [drm_kms_helper]
[ 3.866084] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 3.866087] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 3.866089] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 3.866092] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 3.866094] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 3.866097] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 3.866100] [<c101866f>] ? __switch_to+0xef/0x380
[ 3.866164] [<f8b88620>] ? intel_fbdev_fini+0xd0/0xd0 [i915]
[ 3.866227] [<f8b8862e>] ? intel_fbdev_initial_config+0xe/0x30 [i915]
[ 3.866230] [<c1070f83>] ? async_run_entry_fn+0x33/0xd0
[ 3.866233] [<c1069431>] ? process_one_work+0x191/0x3e0
[ 3.866236] [<c10696b7>] ? worker_thread+0x37/0x4e0
[ 3.866239] [<c1069680>] ? process_one_work+0x3e0/0x3e0
[ 3.866242] [<c106e644>] ? kthread+0xa4/0xc0
[ 3.866245] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 3.866248] [<c106e5a0>] ? kthread_park+0x50/0x50
[ 3.866251] [<c16a3240>] ? ret_from_fork+0x30/0x40
[ 3.866260] ---[ end trace e96a1a7a1ce213e1 ]---
[ 3.866264] ------------[ cut here ]------------
[ 3.866329] WARNING: CPU: 0 PID: 6 at drivers/gpu/drm/i915/intel_display.c:6952 verify_connector_state+0x269/0x320 [i915]
[ 3.866330] connector enabled without attached crtc
[ 3.866331] Modules linked in: evdev joydev input_leds serio_raw pcmcia ipw2200 libipw lib80211 cfg80211 lpc_ich rfkill rng_core snd_intel8x0m snd_intel8x0 snd_ac97_codec i915 ac97_bus snd_pcm yenta_socket pcmcia_rsrc pcmcia_core snd_timer snd soundcore drm_kms_helper parport_pc parport drm i2c_algo_bit fb_sys_fops syscopyarea sysfillrect intel_agp sysimgblt panasonic_laptop intel_gtt sparse_keymap shpchp battery video acpi_cpufreq tpm_tis ac tpm_tis_core tpm button btrfs xor raid6_pq psmouse i2c_i801 i2c_smbus sdhci_pci sdhci mmc_core sky2 thermal rtc_cmos fjes
[ 3.866379] CPU: 0 PID: 6 Comm: kworker/u4:0 Tainted: G W 4.9.160-antix.2-486-smp #1
[ 3.866380] Hardware name: Matsushita Electric Industrial Co.,Ltd. CF-29N3LGZBM/CF29-5, BIOS V5.00L11 12/20/2005
[ 3.866383] Workqueue: events_unbound async_run_entry_fn
[ 3.866385] 00001b28 c1360ff2 f48c9bec 00000000 c1052c52 f8bd2000 f48c9c04 00000006
[ 3.866391] f8bcfb24 00001b28 f8b62819 f8b62819 00000009 f6123c00 f66c3c00 f6140224
[ 3.866398] 00000000 c1052cab 00000009 00000000 f48c9bec f8bd2000 f48c9c04 f8b62819
[ 3.866405] Call Trace:
[ 3.866409] [<c1360ff2>] ? dump_stack+0x55/0x73
[ 3.866411] [<c1052c52>] ? __warn+0xe2/0x100
[ 3.866475] [<f8b62819>] ? verify_connector_state+0x269/0x320 [i915]
[ 3.866539] [<f8b62819>] ? verify_connector_state+0x269/0x320 [i915]
[ 3.866542] [<c1052cab>] ? warn_slowpath_fmt+0x3b/0x40
[ 3.866606] [<f8b62819>] ? verify_connector_state+0x269/0x320 [i915]
[ 3.866668] [<f8b456c0>] ? gen2_read8+0x130/0x130 [i915]
[ 3.866732] [<f8b6c119>] ? intel_atomic_commit_tail+0xbb9/0xf60 [i915]
[ 3.866740] [<f8861444>] ? drm_atomic_helper_setup_commit+0x2e4/0x370 [drm_kms_helper]
[ 3.866805] [<f8b6c7ee>] ? intel_atomic_commit+0x32e/0x4b0 [i915]
[ 3.866869] [<f8b6c4c0>] ? intel_atomic_commit_tail+0xf60/0xf60 [i915]
[ 3.866883] [<f87b5316>] ? drm_atomic_commit+0x46/0x50 [drm]
[ 3.866947] [<f8b7154e>] ? intel_get_load_detect_pipe+0x44e/0x660 [i915]
[ 3.867013] [<f8b8ba54>] ? intel_crt_detect+0x234/0x940 [i915]
[ 3.867027] [<f87ab194>] ? drm_mode_debug_printmodeline+0x84/0x90 [drm]
[ 3.867035] [<f8857f9d>] ? drm_helper_probe_single_connector_modes+0x42d/0x550 [drm_kms_helper]
[ 3.867042] [<f8857b70>] ? drm_kms_helper_poll_enable_locked+0xf0/0xf0 [drm_kms_helper]
[ 3.867048] [<f8865cf9>] ? drm_fb_helper_initial_config+0x79/0x425 [drm_kms_helper]
[ 3.867050] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 3.867053] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 3.867055] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 3.867058] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 3.867061] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 3.867063] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 3.867066] [<c101866f>] ? __switch_to+0xef/0x380
[ 3.867130] [<f8b88620>] ? intel_fbdev_fini+0xd0/0xd0 [i915]
[ 3.867193] [<f8b8862e>] ? intel_fbdev_initial_config+0xe/0x30 [i915]
[ 3.867196] [<c1070f83>] ? async_run_entry_fn+0x33/0xd0
[ 3.867199] [<c1069431>] ? process_one_work+0x191/0x3e0
[ 3.867202] [<c10696b7>] ? worker_thread+0x37/0x4e0
[ 3.867205] [<c1069680>] ? process_one_work+0x3e0/0x3e0
[ 3.867208] [<c106e644>] ? kthread+0xa4/0xc0
[ 3.867211] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 3.867214] [<c106e5a0>] ? kthread_park+0x50/0x50
[ 3.867217] [<c16a3240>] ? ret_from_fork+0x30/0x40
[ 3.867226] ---[ end trace e96a1a7a1ce213e2 ]---
[ 3.964113] ------------[ cut here ]------------
[ 3.964269] WARNING: CPU: 0 PID: 6 at drivers/gpu/drm/i915/intel_display.c:12927 intel_atomic_check+0xcaa/0x1130 [i915]
[ 3.964272] WARN_ON(!connector_state->crtc)
[ 3.964275] Modules linked in:
[ 3.964277] evdev joydev input_leds serio_raw pcmcia ipw2200 libipw lib80211 cfg80211 lpc_ich rfkill rng_core snd_intel8x0m snd_intel8x0 snd_ac97_codec i915 ac97_bus snd_pcm yenta_socket pcmcia_rsrc pcmcia_core snd_timer snd soundcore drm_kms_helper parport_pc parport drm i2c_algo_bit fb_sys_fops syscopyarea sysfillrect intel_agp sysimgblt panasonic_laptop intel_gtt sparse_keymap shpchp battery video acpi_cpufreq tpm_tis ac tpm_tis_core tpm button btrfs xor raid6_pq psmouse i2c_i801 i2c_smbus sdhci_pci sdhci mmc_core sky2 thermal rtc_cmos fjes
[ 3.964388] CPU: 0 PID: 6 Comm: kworker/u4:0 Tainted: G W 4.9.160-antix.2-486-smp #1
[ 3.964391] Hardware name: Matsushita Electric Industrial Co.,Ltd. CF-29N3LGZBM/CF29-5, BIOS V5.00L11 12/20/2005
[ 3.964398] Workqueue: events_unbound async_run_entry_fn
[ 3.964403] 0000327f c1360ff2 f48c9cdc 00000000 c1052c52 f8be1828 f48c9cf4 00000006
[ 3.964419] f8bcfb24 0000327f f8b6daea f8b6daea 00000009 00000000 f49f7d80 f4a5c000
[ 3.964435] f6123c00 c1052cab 00000009 00000000 f48c9cdc f8be1828 f48c9cf4 f8b6daea
[ 3.964450] Call Trace:
[ 3.964460] [<c1360ff2>] ? dump_stack+0x55/0x73
[ 3.964466] [<c1052c52>] ? __warn+0xe2/0x100
[ 3.964618] [<f8b6daea>] ? intel_atomic_check+0xcaa/0x1130 [i915]
[ 3.964767] [<f8b6daea>] ? intel_atomic_check+0xcaa/0x1130 [i915]
[ 3.964775] [<c1052cab>] ? warn_slowpath_fmt+0x3b/0x40
[ 3.964925] [<f8b6daea>] ? intel_atomic_check+0xcaa/0x1130 [i915]
[ 3.964936] [<c10b5059>] ? del_timer_sync+0x39/0x40
[ 3.964945] [<c16a1c8a>] ? schedule_timeout+0x1aa/0x4a0
[ 3.964978] [<f87b4f44>] ? drm_atomic_check_only+0x324/0x6b0 [drm]
[ 3.965009] [<f87b52de>] ? drm_atomic_commit+0xe/0x50 [drm]
[ 3.965061] [<f8b8b686>] ? intel_crt_get_edid+0x66/0x70 [i915]
[ 3.965061] [<f8b45470>] ? gen2_write16+0x120/0x120 [i915]
[ 3.965061] [<f8b717af>] ? intel_release_load_detect_pipe+0x4f/0x90 [i915]
[ 3.965061] [<f8b8bc9f>] ? intel_crt_detect+0x47f/0x940 [i915]
[ 3.965061] [<f8857f9d>] ? drm_helper_probe_single_connector_modes+0x42d/0x550 [drm_kms_helper]
[ 3.965061] [<f8857b70>] ? drm_kms_helper_poll_enable_locked+0xf0/0xf0 [drm_kms_helper]
[ 3.965061] [<f8865cf9>] ? drm_fb_helper_initial_config+0x79/0x425 [drm_kms_helper]
[ 3.965061] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 3.965061] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 3.965061] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 3.965061] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 3.965061] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 3.965061] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 3.965061] [<c101866f>] ? __switch_to+0xef/0x380
[ 3.965061] [<f8b88620>] ? intel_fbdev_fini+0xd0/0xd0 [i915]
[ 3.965061] [<f8b8862e>] ? intel_fbdev_initial_config+0xe/0x30 [i915]
[ 3.965061] [<c1070f83>] ? async_run_entry_fn+0x33/0xd0
[ 3.965061] [<c1069431>] ? process_one_work+0x191/0x3e0
[ 3.965061] [<c10696b7>] ? worker_thread+0x37/0x4e0
[ 3.965061] [<c1069680>] ? process_one_work+0x3e0/0x3e0
[ 3.965061] [<c106e644>] ? kthread+0xa4/0xc0
[ 3.965061] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 3.965061] [<c106e5a0>] ? kthread_park+0x50/0x50
[ 3.965061] [<c16a3240>] ? ret_from_fork+0x30/0x40
[ 3.966077] ---[ end trace e96a1a7a1ce213e3 ]---
[ 3.976054] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 3.976092] pci 0000:07:00.0: [1033:0035] type 00 class 0x0c0310
[ 3.976126] pci 0000:07:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 3.976279] pci 0000:07:00.0: supports D1 D2
[ 3.976286] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot
[ 3.976586] pci 0000:07:00.1: [1033:0035] type 00 class 0x0c0310
[ 3.976616] pci 0000:07:00.1: reg 0x10: [mem 0x00000000-0x00000fff]
[ 3.976748] pci 0000:07:00.1: supports D1 D2
[ 3.976755] pci 0000:07:00.1: PME# supported from D0 D1 D2 D3hot
[ 3.976997] pci 0000:07:00.2: [1033:00e0] type 00 class 0x0c0320
[ 3.977045] pci 0000:07:00.2: reg 0x10: [mem 0x00000000-0x000000ff]
[ 3.977177] pci 0000:07:00.2: supports D1 D2
[ 3.977184] pci 0000:07:00.2: PME# supported from D0 D1 D2 D3hot
[ 3.977422] pci 0000:07:00.0: BAR 0: assigned [mem 0x88000000-0x88000fff]
[ 3.977435] pci 0000:07:00.1: BAR 0: assigned [mem 0x88001000-0x88001fff]
[ 3.977447] pci 0000:07:00.2: BAR 0: assigned [mem 0x88002000-0x880020ff]
[ 3.977506] pci 0000:07:00.0: enabling device (0000 -> 0002)
[ 3.979617] ohci-pci 0000:07:00.0: OHCI PCI host controller
[ 3.979636] ohci-pci 0000:07:00.0: new USB bus registered, assigned bus number 5
[ 3.979688] ohci-pci 0000:07:00.0: irq 20, io mem 0x88000000
[ 3.981961] ata1.00: configured for UDMA/100
[ 3.981986] ata1: EH complete
[ 3.991648] ppdev: user-space parallel port driver
[ 4.004059] ------------[ cut here ]------------
[ 4.004194] WARNING: CPU: 0 PID: 6 at drivers/gpu/drm/i915/intel_display.c:13556 intel_atomic_commit_tail+0xe20/0xf60 [i915]
[ 4.004196] encoder's enabled state mismatch (expected 0, found 1)
[ 4.004198] Modules linked in: ppdev evdev joydev input_leds serio_raw pcmcia ipw2200 libipw lib80211 cfg80211 lpc_ich rfkill rng_core snd_intel8x0m snd_intel8x0 snd_ac97_codec i915 ac97_bus snd_pcm yenta_socket pcmcia_rsrc pcmcia_core snd_timer snd soundcore drm_kms_helper parport_pc parport drm i2c_algo_bit fb_sys_fops syscopyarea sysfillrect intel_agp sysimgblt panasonic_laptop intel_gtt sparse_keymap shpchp battery video acpi_cpufreq tpm_tis ac tpm_tis_core tpm button btrfs xor raid6_pq psmouse i2c_i801 i2c_smbus sdhci_pci sdhci mmc_core sky2 thermal rtc_cmos fjes
[ 4.004263] CPU: 0 PID: 6 Comm: kworker/u4:0 Tainted: G W 4.9.160-antix.2-486-smp #1
[ 4.004265] Hardware name: Matsushita Electric Industrial Co.,Ltd. CF-29N3LGZBM/CF29-5, BIOS V5.00L11 12/20/2005
[ 4.004273] Workqueue: events_unbound async_run_entry_fn
[ 4.004276] 000034f4 c1360ff2 f48c9cc4 00000000 c1052c52 f8bd314c f48c9cdc 00000006
[ 4.004283] f8bcfb24 000034f4 f8b6c380 f8b6c380 00000009 00000001 f49f7d80 f6140224
[ 4.004290] f6140000 c1052cab 00000009 00000000 f48c9cc4 f8bd314c f48c9cdc f8b6c380
[ 4.004297] Call Trace:
[ 4.004306] [<c1360ff2>] ? dump_stack+0x55/0x73
[ 4.004310] [<c1052c52>] ? __warn+0xe2/0x100
[ 4.004376] [<f8b6c380>] ? intel_atomic_commit_tail+0xe20/0xf60 [i915]
[ 4.004440] [<f8b6c380>] ? intel_atomic_commit_tail+0xe20/0xf60 [i915]
[ 4.004443] [<c1052cab>] ? warn_slowpath_fmt+0x3b/0x40
[ 4.004508] [<f8b6c380>] ? intel_atomic_commit_tail+0xe20/0xf60 [i915]
[ 4.004519] [<f8861444>] ? drm_atomic_helper_setup_commit+0x2e4/0x370 [drm_kms_helper]
[ 4.004527] [<f885e324>] ? drm_atomic_helper_prepare_planes+0x54/0x110 [drm_kms_helper]
[ 4.004592] [<f8b6c7ee>] ? intel_atomic_commit+0x32e/0x4b0 [i915]
[ 4.004657] [<f8b6c4c0>] ? intel_atomic_commit_tail+0xf60/0xf60 [i915]
[ 4.004678] [<f87b5316>] ? drm_atomic_commit+0x46/0x50 [drm]
[ 4.004742] [<f8b45470>] ? gen2_write16+0x120/0x120 [i915]
[ 4.004806] [<f8b717af>] ? intel_release_load_detect_pipe+0x4f/0x90 [i915]
[ 4.004871] [<f8b8bc9f>] ? intel_crt_detect+0x47f/0x940 [i915]
[ 4.004879] [<f8857f9d>] ? drm_helper_probe_single_connector_modes+0x42d/0x550 [drm_kms_helper]
[ 4.004886] [<f8857b70>] ? drm_kms_helper_poll_enable_locked+0xf0/0xf0 [drm_kms_helper]
[ 4.004892] [<f8865cf9>] ? drm_fb_helper_initial_config+0x79/0x425 [drm_kms_helper]
[ 4.004897] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.004899] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.004902] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.004904] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.004907] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.004910] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.004915] [<c101866f>] ? __switch_to+0xef/0x380
[ 4.004978] [<f8b88620>] ? intel_fbdev_fini+0xd0/0xd0 [i915]
[ 4.005014] [<f8b8862e>] ? intel_fbdev_initial_config+0xe/0x30 [i915]
[ 4.005014] [<c1070f83>] ? async_run_entry_fn+0x33/0xd0
[ 4.005014] [<c1069431>] ? process_one_work+0x191/0x3e0
[ 4.005014] [<c10696b7>] ? worker_thread+0x37/0x4e0
[ 4.005014] [<c1069680>] ? process_one_work+0x3e0/0x3e0
[ 4.005014] [<c106e644>] ? kthread+0xa4/0xc0
[ 4.005014] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.005014] [<c106e5a0>] ? kthread_park+0x50/0x50
[ 4.005014] [<c16a3240>] ? ret_from_fork+0x30/0x40
[ 4.005183] ---[ end trace e96a1a7a1ce213e4 ]---
[ 4.005204] ------------[ cut here ]------------
[ 4.005270] WARNING: CPU: 0 PID: 6 at drivers/gpu/drm/i915/intel_display.c:13564 intel_atomic_commit_tail+0xf14/0xf60 [i915]
[ 4.005271] encoder detached but still enabled on pipe B.
[ 4.005272] Modules linked in: ppdev evdev joydev input_leds serio_raw pcmcia ipw2200 libipw lib80211 cfg80211 lpc_ich rfkill rng_core snd_intel8x0m snd_intel8x0 snd_ac97_codec i915 ac97_bus snd_pcm yenta_socket pcmcia_rsrc pcmcia_core snd_timer snd soundcore drm_kms_helper parport_pc parport drm i2c_algo_bit fb_sys_fops syscopyarea sysfillrect intel_agp sysimgblt panasonic_laptop intel_gtt sparse_keymap shpchp battery video acpi_cpufreq tpm_tis ac tpm_tis_core tpm button btrfs xor raid6_pq psmouse i2c_i801 i2c_smbus sdhci_pci sdhci mmc_core sky2 thermal rtc_cmos fjes
[ 4.005321] CPU: 0 PID: 6 Comm: kworker/u4:0 Tainted: G W 4.9.160-antix.2-486-smp #1
[ 4.005323] Hardware name: Matsushita Electric Industrial Co.,Ltd. CF-29N3LGZBM/CF29-5, BIOS V5.00L11 12/20/2005
[ 4.005326] Workqueue: events_unbound async_run_entry_fn
[ 4.005328] 000034fc c1360ff2 f48c9cc4 00000000 c1052c52 f8bd3188 f48c9cdc 00000006
[ 4.005335] f8bcfb24 000034fc f8b6c474 f8b6c474 00000009 00000001 f49f7d80 f6140224
[ 4.005341] f6140000 c1052cab 00000009 00000000 f48c9cc4 f8bd3188 f48c9cdc f8b6c474
[ 4.005348] Call Trace:
[ 4.005352] [<c1360ff2>] ? dump_stack+0x55/0x73
[ 4.005355] [<c1052c52>] ? __warn+0xe2/0x100
[ 4.005419] [<f8b6c474>] ? intel_atomic_commit_tail+0xf14/0xf60 [i915]
[ 4.005483] [<f8b6c474>] ? intel_atomic_commit_tail+0xf14/0xf60 [i915]
[ 4.005486] [<c1052cab>] ? warn_slowpath_fmt+0x3b/0x40
[ 4.005550] [<f8b6c474>] ? intel_atomic_commit_tail+0xf14/0xf60 [i915]
[ 4.005558] [<f8861444>] ? drm_atomic_helper_setup_commit+0x2e4/0x370 [drm_kms_helper]
[ 4.005623] [<f8b6c7ee>] ? intel_atomic_commit+0x32e/0x4b0 [i915]
[ 4.005687] [<f8b6c4c0>] ? intel_atomic_commit_tail+0xf60/0xf60 [i915]
[ 4.005701] [<f87b5316>] ? drm_atomic_commit+0x46/0x50 [drm]
[ 4.005765] [<f8b45470>] ? gen2_write16+0x120/0x120 [i915]
[ 4.005829] [<f8b717af>] ? intel_release_load_detect_pipe+0x4f/0x90 [i915]
[ 4.005893] [<f8b8bc9f>] ? intel_crt_detect+0x47f/0x940 [i915]
[ 4.005901] [<f8857f9d>] ? drm_helper_probe_single_connector_modes+0x42d/0x550 [drm_kms_helper]
[ 4.005909] [<f8857b70>] ? drm_kms_helper_poll_enable_locked+0xf0/0xf0 [drm_kms_helper]
[ 4.005915] [<f8865cf9>] ? drm_fb_helper_initial_config+0x79/0x425 [drm_kms_helper]
[ 4.005917] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.005920] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.005922] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.005925] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.005928] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.005930] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.005934] [<c101866f>] ? __switch_to+0xef/0x380
[ 4.005997] [<f8b88620>] ? intel_fbdev_fini+0xd0/0xd0 [i915]
[ 4.006060] [<f8b8862e>] ? intel_fbdev_initial_config+0xe/0x30 [i915]
[ 4.006063] [<c1070f83>] ? async_run_entry_fn+0x33/0xd0
[ 4.006066] [<c1069431>] ? process_one_work+0x191/0x3e0
[ 4.006069] [<c10696b7>] ? worker_thread+0x37/0x4e0
[ 4.006072] [<c1069680>] ? process_one_work+0x3e0/0x3e0
[ 4.006074] [<c106e644>] ? kthread+0xa4/0xc0
[ 4.006074] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.006074] [<c106e5a0>] ? kthread_park+0x50/0x50
[ 4.006074] [<c16a3240>] ? ret_from_fork+0x30/0x40
[ 4.006109] ---[ end trace e96a1a7a1ce213e5 ]---
[ 4.006214] ------------[ cut here ]------------
[ 4.006281] WARNING: CPU: 0 PID: 6 at drivers/gpu/drm/i915/intel_display.c:6952 verify_connector_state+0x269/0x320 [i915]
[ 4.006282] connector enabled without attached crtc
[ 4.006283] Modules linked in: ppdev evdev joydev input_leds serio_raw pcmcia ipw2200 libipw lib80211 cfg80211 lpc_ich rfkill rng_core snd_intel8x0m snd_intel8x0 snd_ac97_codec i915 ac97_bus snd_pcm yenta_socket pcmcia_rsrc pcmcia_core snd_timer snd soundcore drm_kms_helper parport_pc parport drm i2c_algo_bit fb_sys_fops syscopyarea sysfillrect intel_agp sysimgblt panasonic_laptop intel_gtt sparse_keymap shpchp battery video acpi_cpufreq tpm_tis ac tpm_tis_core tpm button btrfs xor raid6_pq psmouse i2c_i801 i2c_smbus sdhci_pci sdhci mmc_core sky2 thermal rtc_cmos fjes
[ 4.006332] CPU: 0 PID: 6 Comm: kworker/u4:0 Tainted: G W 4.9.160-antix.2-486-smp #1
[ 4.006333] Hardware name: Matsushita Electric Industrial Co.,Ltd. CF-29N3LGZBM/CF29-5, BIOS V5.00L11 12/20/2005
[ 4.006336] Workqueue: events_unbound async_run_entry_fn
[ 4.006338] 00001b28 c1360ff2 f48c9c90 00000000 c1052c52 f8bd2000 f48c9ca8 00000006
[ 4.006345] f8bcfb24 00001b28 f8b62819 f8b62819 00000009 f6123c00 f66c3c00 f6140224
[ 4.006351] 00000000 c1052cab 00000009 00000000 f48c9c90 f8bd2000 f48c9ca8 f8b62819
[ 4.006358] Call Trace:
[ 4.006362] [<c1360ff2>] ? dump_stack+0x55/0x73
[ 4.006365] [<c1052c52>] ? __warn+0xe2/0x100
[ 4.006429] [<f8b62819>] ? verify_connector_state+0x269/0x320 [i915]
[ 4.006493] [<f8b62819>] ? verify_connector_state+0x269/0x320 [i915]
[ 4.006496] [<c1052cab>] ? warn_slowpath_fmt+0x3b/0x40
[ 4.006559] [<f8b62819>] ? verify_connector_state+0x269/0x320 [i915]
[ 4.006622] [<f8b456c0>] ? gen2_read8+0x130/0x130 [i915]
[ 4.006687] [<f8b6c119>] ? intel_atomic_commit_tail+0xbb9/0xf60 [i915]
[ 4.006695] [<f8861444>] ? drm_atomic_helper_setup_commit+0x2e4/0x370 [drm_kms_helper]
[ 4.006760] [<f8b6c7ee>] ? intel_atomic_commit+0x32e/0x4b0 [i915]
[ 4.006824] [<f8b6c4c0>] ? intel_atomic_commit_tail+0xf60/0xf60 [i915]
[ 4.006838] [<f87b5316>] ? drm_atomic_commit+0x46/0x50 [drm]
[ 4.006901] [<f8b45470>] ? gen2_write16+0x120/0x120 [i915]
[ 4.006965] [<f8b717af>] ? intel_release_load_detect_pipe+0x4f/0x90 [i915]
[ 4.007030] [<f8b8bc9f>] ? intel_crt_detect+0x47f/0x940 [i915]
[ 4.007038] [<f8857f9d>] ? drm_helper_probe_single_connector_modes+0x42d/0x550 [drm_kms_helper]
[ 4.007045] [<f8857b70>] ? drm_kms_helper_poll_enable_locked+0xf0/0xf0 [drm_kms_helper]
[ 4.007051] [<f8865cf9>] ? drm_fb_helper_initial_config+0x79/0x425 [drm_kms_helper]
[ 4.007054] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.007057] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.007059] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.007062] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.007064] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.007067] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.007070] [<c101866f>] ? __switch_to+0xef/0x380
[ 4.007090] [<f8b88620>] ? intel_fbdev_fini+0xd0/0xd0 [i915]
[ 4.007090] [<f8b8862e>] ? intel_fbdev_initial_config+0xe/0x30 [i915]
[ 4.007090] [<c1070f83>] ? async_run_entry_fn+0x33/0xd0
[ 4.007090] [<c1069431>] ? process_one_work+0x191/0x3e0
[ 4.007090] [<c10696b7>] ? worker_thread+0x37/0x4e0
[ 4.007090] [<c1069680>] ? process_one_work+0x3e0/0x3e0
[ 4.007090] [<c106e644>] ? kthread+0xa4/0xc0
[ 4.007090] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.007090] [<c106e5a0>] ? kthread_park+0x50/0x50
[ 4.007090] [<c16a3240>] ? ret_from_fork+0x30/0x40
[ 4.007247] ---[ end trace e96a1a7a1ce213e6 ]---
[ 4.007925] ------------[ cut here ]------------
[ 4.007990] WARNING: CPU: 0 PID: 6 at drivers/gpu/drm/i915/intel_display.c:12927 intel_atomic_check+0xcaa/0x1130 [i915]
[ 4.007991] WARN_ON(!connector_state->crtc)
[ 4.007993] Modules linked in:
[ 4.007994] ppdev evdev joydev input_leds serio_raw pcmcia ipw2200 libipw lib80211 cfg80211 lpc_ich rfkill rng_core snd_intel8x0m snd_intel8x0 snd_ac97_codec i915 ac97_bus snd_pcm yenta_socket pcmcia_rsrc pcmcia_core snd_timer snd soundcore drm_kms_helper parport_pc parport drm i2c_algo_bit fb_sys_fops syscopyarea sysfillrect intel_agp sysimgblt panasonic_laptop intel_gtt sparse_keymap shpchp battery video acpi_cpufreq tpm_tis ac tpm_tis_core tpm button btrfs xor raid6_pq psmouse i2c_i801 i2c_smbus sdhci_pci sdhci mmc_core sky2 thermal rtc_cmos fjes
[ 4.008065] CPU: 0 PID: 6 Comm: kworker/u4:0 Tainted: G W 4.9.160-antix.2-486-smp #1
[ 4.008066] Hardware name: Matsushita Electric Industrial Co.,Ltd. CF-29N3LGZBM/CF29-5, BIOS V5.00L11 12/20/2005
[ 4.008069] Workqueue: events_unbound async_run_entry_fn
[ 4.008072] 0000327f c1360ff2 f48c9b88 00000000 c1052c52 f8be1828 f48c9ba0 00000006
[ 4.008078] f8bcfb24 0000327f f8b6daea f8b6daea 00000009 00000000 f49f7d80 f4a5c000
[ 4.008084] f6123c00 c1052cab 00000009 00000000 f48c9b88 f8be1828 f48c9ba0 f8b6daea
[ 4.008089] Call Trace:
[ 4.008094] [<c1360ff2>] ? dump_stack+0x55/0x73
[ 4.008096] [<c1052c52>] ? __warn+0xe2/0x100
[ 4.008153] [<f8b6daea>] ? intel_atomic_check+0xcaa/0x1130 [i915]
[ 4.008209] [<f8b6daea>] ? intel_atomic_check+0xcaa/0x1130 [i915]
[ 4.008212] [<c1052cab>] ? warn_slowpath_fmt+0x3b/0x40
[ 4.008268] [<f8b6daea>] ? intel_atomic_check+0xcaa/0x1130 [i915]
[ 4.008282] [<f87b4f44>] ? drm_atomic_check_only+0x324/0x6b0 [drm]
[ 4.008285] [<c113ea93>] ? kmemdup+0x23/0x30
[ 4.008297] [<f87b52de>] ? drm_atomic_commit+0xe/0x50 [drm]
[ 4.008354] [<f8b7154e>] ? intel_get_load_detect_pipe+0x44e/0x660 [i915]
[ 4.008411] [<f8baee42>] ? intel_tv_detect+0x142/0x5b0 [i915]
[ 4.008421] [<f8857f9d>] ? drm_helper_probe_single_connector_modes+0x42d/0x550 [drm_kms_helper]
[ 4.008427] [<f8857b70>] ? drm_kms_helper_poll_enable_locked+0xf0/0xf0 [drm_kms_helper]
[ 4.008432] [<f8865cf9>] ? drm_fb_helper_initial_config+0x79/0x425 [drm_kms_helper]
[ 4.008435] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.008437] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.008439] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.008442] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.008444] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.008446] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.008450] [<c101866f>] ? __switch_to+0xef/0x380
[ 4.008506] [<f8b88620>] ? intel_fbdev_fini+0xd0/0xd0 [i915]
[ 4.008562] [<f8b8862e>] ? intel_fbdev_initial_config+0xe/0x30 [i915]
[ 4.008564] [<c1070f83>] ? async_run_entry_fn+0x33/0xd0
[ 4.008567] [<c1069431>] ? process_one_work+0x191/0x3e0
[ 4.008570] [<c10696b7>] ? worker_thread+0x37/0x4e0
[ 4.008572] [<c1069680>] ? process_one_work+0x3e0/0x3e0
[ 4.008575] [<c106e644>] ? kthread+0xa4/0xc0
[ 4.008577] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.008580] [<c106e5a0>] ? kthread_park+0x50/0x50
[ 4.008583] [<c16a3240>] ? ret_from_fork+0x30/0x40
[ 4.008584] ---[ end trace e96a1a7a1ce213e7 ]---
[ 4.065039] ------------[ cut here ]------------
[ 4.065179] WARNING: CPU: 0 PID: 6 at drivers/gpu/drm/i915/intel_display.c:13556 intel_atomic_commit_tail+0xe20/0xf60 [i915]
[ 4.065181] encoder's enabled state mismatch (expected 0, found 1)
[ 4.065183] Modules linked in: ppdev evdev joydev input_leds serio_raw pcmcia ipw2200 libipw lib80211 cfg80211 lpc_ich rfkill rng_core snd_intel8x0m snd_intel8x0 snd_ac97_codec i915 ac97_bus snd_pcm yenta_socket pcmcia_rsrc pcmcia_core snd_timer snd soundcore drm_kms_helper parport_pc parport drm i2c_algo_bit fb_sys_fops syscopyarea sysfillrect intel_agp sysimgblt panasonic_laptop intel_gtt sparse_keymap shpchp battery video acpi_cpufreq tpm_tis ac tpm_tis_core tpm button btrfs xor raid6_pq psmouse i2c_i801 i2c_smbus sdhci_pci sdhci mmc_core sky2 thermal rtc_cmos fjes
[ 4.065242] CPU: 0 PID: 6 Comm: kworker/u4:0 Tainted: G W 4.9.160-antix.2-486-smp #1
[ 4.065243] Hardware name: Matsushita Electric Industrial Co.,Ltd. CF-29N3LGZBM/CF29-5, BIOS V5.00L11 12/20/2005
[ 4.065251] Workqueue: events_unbound async_run_entry_fn
[ 4.065254] 000034f4 c1360ff2 f48c9b70 00000000 c1052c52 f8bd314c f48c9b88 00000006
[ 4.065260] f8bcfb24 000034f4 f8b6c380 f8b6c380 00000009 00000001 f49f7d80 f6140224
[ 4.065266] f6140000 c1052cab 00000009 00000000 f48c9b70 f8bd314c f48c9b88 f8b6c380
[ 4.065272] Call Trace:
[ 4.065281] [<c1360ff2>] ? dump_stack+0x55/0x73
[ 4.065284] [<c1052c52>] ? __warn+0xe2/0x100
[ 4.065342] [<f8b6c380>] ? intel_atomic_commit_tail+0xe20/0xf60 [i915]
[ 4.065398] [<f8b6c380>] ? intel_atomic_commit_tail+0xe20/0xf60 [i915]
[ 4.065401] [<c1052cab>] ? warn_slowpath_fmt+0x3b/0x40
[ 4.065457] [<f8b6c380>] ? intel_atomic_commit_tail+0xe20/0xf60 [i915]
[ 4.065468] [<f8861444>] ? drm_atomic_helper_setup_commit+0x2e4/0x370 [drm_kms_helper]
[ 4.065474] [<f885e324>] ? drm_atomic_helper_prepare_planes+0x54/0x110 [drm_kms_helper]
[ 4.065531] [<f8b6c7ee>] ? intel_atomic_commit+0x32e/0x4b0 [i915]
[ 4.065588] [<f8b6c4c0>] ? intel_atomic_commit_tail+0xf60/0xf60 [i915]
[ 4.065609] [<f87b5316>] ? drm_atomic_commit+0x46/0x50 [drm]
[ 4.065666] [<f8b7154e>] ? intel_get_load_detect_pipe+0x44e/0x660 [i915]
[ 4.065724] [<f8baee42>] ? intel_tv_detect+0x142/0x5b0 [i915]
[ 4.065732] [<f8857f9d>] ? drm_helper_probe_single_connector_modes+0x42d/0x550 [drm_kms_helper]
[ 4.065738] [<f8857b70>] ? drm_kms_helper_poll_enable_locked+0xf0/0xf0 [drm_kms_helper]
[ 4.065743] [<f8865cf9>] ? drm_fb_helper_initial_config+0x79/0x425 [drm_kms_helper]
[ 4.065747] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.065749] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.065751] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.065754] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.065756] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.065758] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.065763] [<c101866f>] ? __switch_to+0xef/0x380
[ 4.065819] [<f8b88620>] ? intel_fbdev_fini+0xd0/0xd0 [i915]
[ 4.065875] [<f8b8862e>] ? intel_fbdev_initial_config+0xe/0x30 [i915]
[ 4.065878] [<c1070f83>] ? async_run_entry_fn+0x33/0xd0
[ 4.065881] [<c1069431>] ? process_one_work+0x191/0x3e0
[ 4.065884] [<c10696b7>] ? worker_thread+0x37/0x4e0
[ 4.065887] [<c1069680>] ? process_one_work+0x3e0/0x3e0
[ 4.065890] [<c106e644>] ? kthread+0xa4/0xc0
[ 4.065892] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.065896] [<c106e5a0>] ? kthread_park+0x50/0x50
[ 4.065898] [<c16a3240>] ? ret_from_fork+0x30/0x40
[ 4.065998] ---[ end trace e96a1a7a1ce213e8 ]---
[ 4.067025] ------------[ cut here ]------------
[ 4.067103] WARNING: CPU: 0 PID: 6 at drivers/gpu/drm/i915/intel_display.c:13564 intel_atomic_commit_tail+0xf14/0xf60 [i915]
[ 4.067104] encoder detached but still enabled on pipe B.
[ 4.067105] Modules linked in: ppdev evdev joydev input_leds serio_raw pcmcia ipw2200 libipw lib80211 cfg80211 lpc_ich rfkill rng_core snd_intel8x0m snd_intel8x0 snd_ac97_codec i915 ac97_bus snd_pcm yenta_socket pcmcia_rsrc pcmcia_core snd_timer snd soundcore drm_kms_helper parport_pc parport drm i2c_algo_bit fb_sys_fops syscopyarea sysfillrect intel_agp sysimgblt panasonic_laptop intel_gtt sparse_keymap shpchp battery video acpi_cpufreq tpm_tis ac tpm_tis_core tpm button btrfs xor raid6_pq psmouse i2c_i801 i2c_smbus sdhci_pci sdhci mmc_core sky2 thermal rtc_cmos fjes
[ 4.067155] CPU: 0 PID: 6 Comm: kworker/u4:0 Tainted: G W 4.9.160-antix.2-486-smp #1
[ 4.067156] Hardware name: Matsushita Electric Industrial Co.,Ltd. CF-29N3LGZBM/CF29-5, BIOS V5.00L11 12/20/2005
[ 4.067161] Workqueue: events_unbound async_run_entry_fn
[ 4.067163] 000034fc c1360ff2 f48c9b70 00000000 c1052c52 f8bd3188 f48c9b88 00000006
[ 4.067170] f8bcfb24 000034fc f8b6c474 f8b6c474 00000009 00000001 f49f7d80 f6140224
[ 4.067176] f6140000 c1052cab 00000009 00000000 f48c9b70 f8bd3188 f48c9b88 f8b6c474
[ 4.067181] Call Trace:
[ 4.067188] [<c1360ff2>] ? dump_stack+0x55/0x73
[ 4.067191] [<c1052c52>] ? __warn+0xe2/0x100
[ 4.067248] [<f8b6c474>] ? intel_atomic_commit_tail+0xf14/0xf60 [i915]
[ 4.067304] [<f8b6c474>] ? intel_atomic_commit_tail+0xf14/0xf60 [i915]
[ 4.067307] [<c1052cab>] ? warn_slowpath_fmt+0x3b/0x40
[ 4.067363] [<f8b6c474>] ? intel_atomic_commit_tail+0xf14/0xf60 [i915]
[ 4.067373] [<f8861444>] ? drm_atomic_helper_setup_commit+0x2e4/0x370 [drm_kms_helper]
[ 4.067430] [<f8b6c7ee>] ? intel_atomic_commit+0x32e/0x4b0 [i915]
[ 4.067487] [<f8b6c4c0>] ? intel_atomic_commit_tail+0xf60/0xf60 [i915]
[ 4.067502] [<f87b5316>] ? drm_atomic_commit+0x46/0x50 [drm]
[ 4.067559] [<f8b7154e>] ? intel_get_load_detect_pipe+0x44e/0x660 [i915]
[ 4.067617] [<f8baee42>] ? intel_tv_detect+0x142/0x5b0 [i915]
[ 4.067626] [<f8857f9d>] ? drm_helper_probe_single_connector_modes+0x42d/0x550 [drm_kms_helper]
[ 4.067632] [<f8857b70>] ? drm_kms_helper_poll_enable_locked+0xf0/0xf0 [drm_kms_helper]
[ 4.067637] [<f8865cf9>] ? drm_fb_helper_initial_config+0x79/0x425 [drm_kms_helper]
[ 4.067640] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.067642] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.067645] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.067647] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.067649] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.067651] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.067656] [<c101866f>] ? __switch_to+0xef/0x380
[ 4.067712] [<f8b88620>] ? intel_fbdev_fini+0xd0/0xd0 [i915]
[ 4.067767] [<f8b8862e>] ? intel_fbdev_initial_config+0xe/0x30 [i915]
[ 4.067770] [<c1070f83>] ? async_run_entry_fn+0x33/0xd0
[ 4.067773] [<c1069431>] ? process_one_work+0x191/0x3e0
[ 4.067776] [<c10696b7>] ? worker_thread+0x37/0x4e0
[ 4.067778] [<c1069680>] ? process_one_work+0x3e0/0x3e0
[ 4.067781] [<c106e644>] ? kthread+0xa4/0xc0
[ 4.067783] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.067786] [<c106e5a0>] ? kthread_park+0x50/0x50
[ 4.067789] [<c16a3240>] ? ret_from_fork+0x30/0x40
[ 4.067791] ---[ end trace e96a1a7a1ce213e9 ]---
[ 4.067796] ------------[ cut here ]------------
[ 4.067853] WARNING: CPU: 0 PID: 6 at drivers/gpu/drm/i915/intel_display.c:6952 verify_connector_state+0x269/0x320 [i915]
[ 4.067854] connector enabled without attached crtc
[ 4.067855] Modules linked in: ppdev evdev joydev input_leds serio_raw pcmcia ipw2200 libipw lib80211 cfg80211 lpc_ich rfkill rng_core snd_intel8x0m snd_intel8x0 snd_ac97_codec i915 ac97_bus snd_pcm yenta_socket pcmcia_rsrc pcmcia_core snd_timer snd soundcore drm_kms_helper parport_pc parport drm i2c_algo_bit fb_sys_fops syscopyarea sysfillrect intel_agp sysimgblt panasonic_laptop intel_gtt sparse_keymap shpchp battery video acpi_cpufreq tpm_tis ac tpm_tis_core tpm button btrfs xor raid6_pq psmouse i2c_i801 i2c_smbus sdhci_pci sdhci mmc_core sky2 thermal rtc_cmos fjes
[ 4.067897] CPU: 0 PID: 6 Comm: kworker/u4:0 Tainted: G W 4.9.160-antix.2-486-smp #1
[ 4.067899] Hardware name: Matsushita Electric Industrial Co.,Ltd. CF-29N3LGZBM/CF29-5, BIOS V5.00L11 12/20/2005
[ 4.067901] Workqueue: events_unbound async_run_entry_fn
[ 4.067902] 00001b28 c1360ff2 f48c9b3c 00000000 c1052c52 f8bd2000 f48c9b54 00000006
[ 4.067909] f8bcfb24 00001b28 f8b62819 f8b62819 00000009 f6123c00 f66c3c00 f6140224
[ 4.067914] 00000000 c1052cab 00000009 00000000 f48c9b3c f8bd2000 f48c9b54 f8b62819
[ 4.067920] Call Trace:
[ 4.067924] [<c1360ff2>] ? dump_stack+0x55/0x73
[ 4.067926] [<c1052c52>] ? __warn+0xe2/0x100
[ 4.067982] [<f8b62819>] ? verify_connector_state+0x269/0x320 [i915]
[ 4.068006] [<f8b62819>] ? verify_connector_state+0x269/0x320 [i915]
[ 4.068006] [<c1052cab>] ? warn_slowpath_fmt+0x3b/0x40
[ 4.068006] [<f8b62819>] ? verify_connector_state+0x269/0x320 [i915]
[ 4.068006] [<f8b8b497>] ? intel_crt_get_hw_state+0x57/0x90 [i915]
[ 4.068006] [<f8b6c119>] ? intel_atomic_commit_tail+0xbb9/0xf60 [i915]
[ 4.068006] [<f8861444>] ? drm_atomic_helper_setup_commit+0x2e4/0x370 [drm_kms_helper]
[ 4.068006] [<f8b6c7ee>] ? intel_atomic_commit+0x32e/0x4b0 [i915]
[ 4.068006] [<f8b6c4c0>] ? intel_atomic_commit_tail+0xf60/0xf60 [i915]
[ 4.068006] [<f87b5316>] ? drm_atomic_commit+0x46/0x50 [drm]
[ 4.068006] [<f8b7154e>] ? intel_get_load_detect_pipe+0x44e/0x660 [i915]
[ 4.068006] [<f8baee42>] ? intel_tv_detect+0x142/0x5b0 [i915]
[ 4.068006] [<f8857f9d>] ? drm_helper_probe_single_connector_modes+0x42d/0x550 [drm_kms_helper]
[ 4.068006] [<f8857b70>] ? drm_kms_helper_poll_enable_locked+0xf0/0xf0 [drm_kms_helper]
[ 4.068006] [<f8865cf9>] ? drm_fb_helper_initial_config+0x79/0x425 [drm_kms_helper]
[ 4.068006] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.068006] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.068006] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.068006] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.068006] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.068006] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.068006] [<c101866f>] ? __switch_to+0xef/0x380
[ 4.068006] [<f8b88620>] ? intel_fbdev_fini+0xd0/0xd0 [i915]
[ 4.068006] [<f8b8862e>] ? intel_fbdev_initial_config+0xe/0x30 [i915]
[ 4.068006] [<c1070f83>] ? async_run_entry_fn+0x33/0xd0
[ 4.068006] [<c1069431>] ? process_one_work+0x191/0x3e0
[ 4.068006] [<c10696b7>] ? worker_thread+0x37/0x4e0
[ 4.068006] [<c1069680>] ? process_one_work+0x3e0/0x3e0
[ 4.068006] [<c106e644>] ? kthread+0xa4/0xc0
[ 4.068006] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.068006] [<c106e5a0>] ? kthread_park+0x50/0x50
[ 4.068006] [<c16a3240>] ? ret_from_fork+0x30/0x40
[ 4.068647] ---[ end trace e96a1a7a1ce213ea ]---
[ 4.076164] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.076170] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.076173] usb usb5: Product: OHCI PCI host controller
[ 4.076175] usb usb5: Manufacturer: Linux 4.9.160-antix.2-486-smp ohci_hcd
[ 4.076177] usb usb5: SerialNumber: 0000:07:00.0
[ 4.077069] hub 5-0:1.0: USB hub found
[ 4.077094] hub 5-0:1.0: 3 ports detected
[ 4.077304] pci 0000:07:00.1: enabling device (0000 -> 0002)
[ 4.077637] ohci-pci 0000:07:00.1: OHCI PCI host controller
[ 4.077647] ohci-pci 0000:07:00.1: new USB bus registered, assigned bus number 6
[ 4.077681] ohci-pci 0000:07:00.1: irq 20, io mem 0x88001000
[ 4.170836] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.170859] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.170861] usb usb6: Product: OHCI PCI host controller
[ 4.170864] usb usb6: Manufacturer: Linux 4.9.160-antix.2-486-smp ohci_hcd
[ 4.170866] usb usb6: SerialNumber: 0000:07:00.1
[ 4.172822] hub 6-0:1.0: USB hub found
[ 4.172838] hub 6-0:1.0: 2 ports detected
[ 4.174027] pci 0000:07:00.2: enabling device (0000 -> 0002)
[ 4.174144] wl: loading out-of-tree module taints kernel.
[ 4.174151] wl: module license 'MIXED/Proprietary' taints kernel.
[ 4.174152] Disabling lock debugging due to kernel taint
[ 4.181338] ehci-pci 0000:07:00.2: EHCI Host Controller
[ 4.181354] ehci-pci 0000:07:00.2: new USB bus registered, assigned bus number 7
[ 4.181417] ehci-pci 0000:07:00.2: irq 20, io mem 0x88002000
[ 4.188039] ehci-pci 0000:07:00.2: USB 2.0 started, EHCI 1.00
[ 4.188215] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.188218] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.188221] usb usb7: Product: EHCI Host Controller
[ 4.188223] usb usb7: Manufacturer: Linux 4.9.160-antix.2-486-smp ehci_hcd
[ 4.188226] usb usb7: SerialNumber: 0000:07:00.2
[ 4.188485] hub 7-0:1.0: USB hub found
[ 4.188498] hub 7-0:1.0: 5 ports detected
[ 4.203731] ------------[ cut here ]------------
[ 4.203922] WARNING: CPU: 0 PID: 6 at drivers/gpu/drm/i915/intel_display.c:12927 intel_atomic_check+0xcaa/0x1130 [i915]
[ 4.203925] WARN_ON(!connector_state->crtc)
[ 4.203927] Modules linked in:
[ 4.203929] ppdev evdev joydev input_leds serio_raw pcmcia ipw2200 libipw lib80211 cfg80211 lpc_ich rfkill rng_core snd_intel8x0m snd_intel8x0 snd_ac97_codec i915 ac97_bus snd_pcm yenta_socket pcmcia_rsrc pcmcia_core snd_timer snd soundcore drm_kms_helper parport_pc parport drm i2c_algo_bit fb_sys_fops syscopyarea sysfillrect intel_agp sysimgblt panasonic_laptop intel_gtt sparse_keymap shpchp battery video acpi_cpufreq tpm_tis ac tpm_tis_core tpm button btrfs xor raid6_pq psmouse i2c_i801 i2c_smbus sdhci_pci sdhci mmc_core sky2 thermal rtc_cmos fjes
[ 4.204071] CPU: 0 PID: 6 Comm: kworker/u4:0 Tainted: P W O 4.9.160-antix.2-486-smp #1
[ 4.204073] Hardware name: Matsushita Electric Industrial Co.,Ltd. CF-29N3LGZBM/CF29-5, BIOS V5.00L11 12/20/2005
[ 4.204084] Workqueue: events_unbound async_run_entry_fn
[ 4.204087] 0000327f c1360ff2 f48c9c2c 00000000 c1052c52 f8be1828 f48c9c44 00000006
[ 4.204093] f8bcfb24 0000327f f8b6daea f8b6daea 00000009 00000000 f49f7d80 f4a5d800
[ 4.204099] f6123c00 c1052cab 00000009 00000000 f48c9c2c f8be1828 f48c9c44 f8b6daea
[ 4.204105] Call Trace:
[ 4.204116] [<c1360ff2>] ? dump_stack+0x55/0x73
[ 4.204120] [<c1052c52>] ? __warn+0xe2/0x100
[ 4.204190] [<f8b6daea>] ? intel_atomic_check+0xcaa/0x1130 [i915]
[ 4.204247] [<f8b6daea>] ? intel_atomic_check+0xcaa/0x1130 [i915]
[ 4.204250] [<c1052cab>] ? warn_slowpath_fmt+0x3b/0x40
[ 4.204306] [<f8b6daea>] ? intel_atomic_check+0xcaa/0x1130 [i915]
[ 4.204312] [<c10b5059>] ? del_timer_sync+0x39/0x40
[ 4.204319] [<c16a1c8a>] ? schedule_timeout+0x1aa/0x4a0
[ 4.204344] [<f87b4f44>] ? drm_atomic_check_only+0x324/0x6b0 [drm]
[ 4.204408] [<f8b456c0>] ? gen2_read8+0x130/0x130 [i915]
[ 4.204421] [<f87b52de>] ? drm_atomic_commit+0xe/0x50 [drm]
[ 4.204478] [<f8b717af>] ? intel_release_load_detect_pipe+0x4f/0x90 [i915]
[ 4.204535] [<f8baf085>] ? intel_tv_detect+0x385/0x5b0 [i915]
[ 4.204550] [<f8857f9d>] ? drm_helper_probe_single_connector_modes+0x42d/0x550 [drm_kms_helper]
[ 4.204556] [<f8857b70>] ? drm_kms_helper_poll_enable_locked+0xf0/0xf0 [drm_kms_helper]
[ 4.204561] [<f8865cf9>] ? drm_fb_helper_initial_config+0x79/0x425 [drm_kms_helper]
[ 4.204565] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.204568] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.204570] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.204572] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.204574] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.204576] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.204582] [<c101866f>] ? __switch_to+0xef/0x380
[ 4.204640] [<f8b88620>] ? intel_fbdev_fini+0xd0/0xd0 [i915]
[ 4.204695] [<f8b8862e>] ? intel_fbdev_initial_config+0xe/0x30 [i915]
[ 4.204698] [<c1070f83>] ? async_run_entry_fn+0x33/0xd0
[ 4.204702] [<c1069431>] ? process_one_work+0x191/0x3e0
[ 4.204704] [<c10696b7>] ? worker_thread+0x37/0x4e0
[ 4.204707] [<c1069680>] ? process_one_work+0x3e0/0x3e0
[ 4.204711] [<c106e644>] ? kthread+0xa4/0xc0
[ 4.204713] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.204716] [<c106e5a0>] ? kthread_park+0x50/0x50
[ 4.204718] [<c16a3240>] ? ret_from_fork+0x30/0x40
[ 4.204721] ---[ end trace e96a1a7a1ce213eb ]---
[ 4.240202] hub 5-0:1.0: USB hub found
[ 4.240219] hub 5-0:1.0: 3 ports detected
[ 4.253048] ------------[ cut here ]------------
[ 4.253184] WARNING: CPU: 0 PID: 6 at drivers/gpu/drm/i915/intel_display.c:13556 intel_atomic_commit_tail+0xe20/0xf60 [i915]
[ 4.253185] encoder's enabled state mismatch (expected 0, found 1)
[ 4.253187] Modules linked in: ppdev evdev joydev input_leds serio_raw pcmcia ipw2200 libipw lib80211 cfg80211 lpc_ich rfkill rng_core snd_intel8x0m snd_intel8x0 snd_ac97_codec i915 ac97_bus snd_pcm yenta_socket pcmcia_rsrc pcmcia_core snd_timer snd soundcore drm_kms_helper parport_pc parport drm i2c_algo_bit fb_sys_fops syscopyarea sysfillrect intel_agp sysimgblt panasonic_laptop intel_gtt sparse_keymap shpchp battery video acpi_cpufreq tpm_tis ac tpm_tis_core tpm button btrfs xor raid6_pq psmouse i2c_i801 i2c_smbus sdhci_pci sdhci mmc_core sky2 thermal rtc_cmos fjes
[ 4.253246] CPU: 0 PID: 6 Comm: kworker/u4:0 Tainted: P W O 4.9.160-antix.2-486-smp #1
[ 4.253248] Hardware name: Matsushita Electric Industrial Co.,Ltd. CF-29N3LGZBM/CF29-5, BIOS V5.00L11 12/20/2005
[ 4.253255] Workqueue: events_unbound async_run_entry_fn
[ 4.253258] 000034f4 c1360ff2 f48c9c14 00000000 c1052c52 f8bd314c f48c9c2c 00000006
[ 4.253264] f8bcfb24 000034f4 f8b6c380 f8b6c380 00000009 00000001 f49f7d80 f6140224
[ 4.253270] f6140000 c1052cab 00000009 00000000 f48c9c14 f8bd314c f48c9c2c f8b6c380
[ 4.253276] Call Trace:
[ 4.253284] [<c1360ff2>] ? dump_stack+0x55/0x73
[ 4.253288] [<c1052c52>] ? __warn+0xe2/0x100
[ 4.253345] [<f8b6c380>] ? intel_atomic_commit_tail+0xe20/0xf60 [i915]
[ 4.253401] [<f8b6c380>] ? intel_atomic_commit_tail+0xe20/0xf60 [i915]
[ 4.253404] [<c1052cab>] ? warn_slowpath_fmt+0x3b/0x40
[ 4.253460] [<f8b6c380>] ? intel_atomic_commit_tail+0xe20/0xf60 [i915]
[ 4.253471] [<f8861444>] ? drm_atomic_helper_setup_commit+0x2e4/0x370 [drm_kms_helper]
[ 4.253478] [<f885e324>] ? drm_atomic_helper_prepare_planes+0x54/0x110 [drm_kms_helper]
[ 4.253534] [<f8b6c7ee>] ? intel_atomic_commit+0x32e/0x4b0 [i915]
[ 4.253592] [<f8b6c4c0>] ? intel_atomic_commit_tail+0xf60/0xf60 [i915]
[ 4.253646] [<f8b456c0>] ? gen2_read8+0x130/0x130 [i915]
[ 4.253668] [<f87b5316>] ? drm_atomic_commit+0x46/0x50 [drm]
[ 4.253725] [<f8b717af>] ? intel_release_load_detect_pipe+0x4f/0x90 [i915]
[ 4.253782] [<f8baf085>] ? intel_tv_detect+0x385/0x5b0 [i915]
[ 4.253790] [<f8857f9d>] ? drm_helper_probe_single_connector_modes+0x42d/0x550 [drm_kms_helper]
[ 4.253797] [<f8857b70>] ? drm_kms_helper_poll_enable_locked+0xf0/0xf0 [drm_kms_helper]
[ 4.253802] [<f8865cf9>] ? drm_fb_helper_initial_config+0x79/0x425 [drm_kms_helper]
[ 4.253805] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.253808] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.253810] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.253812] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.253814] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.253816] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.253821] [<c101866f>] ? __switch_to+0xef/0x380
[ 4.253878] [<f8b88620>] ? intel_fbdev_fini+0xd0/0xd0 [i915]
[ 4.253933] [<f8b8862e>] ? intel_fbdev_initial_config+0xe/0x30 [i915]
[ 4.253936] [<c1070f83>] ? async_run_entry_fn+0x33/0xd0
[ 4.253940] [<c1069431>] ? process_one_work+0x191/0x3e0
[ 4.253942] [<c10696b7>] ? worker_thread+0x37/0x4e0
[ 4.253945] [<c1069680>] ? process_one_work+0x3e0/0x3e0
[ 4.253948] [<c106e644>] ? kthread+0xa4/0xc0
[ 4.253951] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.253954] [<c106e5a0>] ? kthread_park+0x50/0x50
[ 4.253956] [<c16a3240>] ? ret_from_fork+0x30/0x40
[ 4.253958] ---[ end trace e96a1a7a1ce213ec ]---
[ 4.253961] ------------[ cut here ]------------
[ 4.254007] WARNING: CPU: 0 PID: 6 at drivers/gpu/drm/i915/intel_display.c:13564 intel_atomic_commit_tail+0xf14/0xf60 [i915]
[ 4.254030] encoder detached but still enabled on pipe B.
[ 4.254031] Modules linked in: ppdev evdev joydev input_leds serio_raw pcmcia ipw2200 libipw lib80211 cfg80211 lpc_ich rfkill rng_core snd_intel8x0m snd_intel8x0 snd_ac97_codec i915 ac97_bus snd_pcm yenta_socket pcmcia_rsrc pcmcia_core snd_timer snd soundcore drm_kms_helper parport_pc parport drm i2c_algo_bit fb_sys_fops syscopyarea sysfillrect intel_agp sysimgblt panasonic_laptop intel_gtt sparse_keymap shpchp battery video acpi_cpufreq tpm_tis ac tpm_tis_core tpm button btrfs xor raid6_pq psmouse i2c_i801 i2c_smbus sdhci_pci sdhci mmc_core sky2 thermal rtc_cmos fjes
[ 4.254073] CPU: 0 PID: 6 Comm: kworker/u4:0 Tainted: P W O 4.9.160-antix.2-486-smp #1
[ 4.254075] Hardware name: Matsushita Electric Industrial Co.,Ltd. CF-29N3LGZBM/CF29-5, BIOS V5.00L11 12/20/2005
[ 4.254077] Workqueue: events_unbound async_run_entry_fn
[ 4.254079] 000034fc c1360ff2 f48c9c14 00000000 c1052c52 f8bd3188 f48c9c2c 00000006
[ 4.254085] f8bcfb24 000034fc f8b6c474 f8b6c474 00000009 00000001 f49f7d80 f6140224
[ 4.254091] f6140000 c1052cab 00000009 00000000 f48c9c14 f8bd3188 f48c9c2c f8b6c474
[ 4.254097] Call Trace:
[ 4.254100] [<c1360ff2>] ? dump_stack+0x55/0x73
[ 4.254102] [<c1052c52>] ? __warn+0xe2/0x100
[ 4.254159] [<f8b6c474>] ? intel_atomic_commit_tail+0xf14/0xf60 [i915]
[ 4.254215] [<f8b6c474>] ? intel_atomic_commit_tail+0xf14/0xf60 [i915]
[ 4.254217] [<c1052cab>] ? warn_slowpath_fmt+0x3b/0x40
[ 4.254273] [<f8b6c474>] ? intel_atomic_commit_tail+0xf14/0xf60 [i915]
[ 4.254280] [<f8861444>] ? drm_atomic_helper_setup_commit+0x2e4/0x370 [drm_kms_helper]
[ 4.254336] [<f8b6c7ee>] ? intel_atomic_commit+0x32e/0x4b0 [i915]
[ 4.254393] [<f8b6c4c0>] ? intel_atomic_commit_tail+0xf60/0xf60 [i915]
[ 4.254447] [<f8b456c0>] ? gen2_read8+0x130/0x130 [i915]
[ 4.254460] [<f87b5316>] ? drm_atomic_commit+0x46/0x50 [drm]
[ 4.254516] [<f8b717af>] ? intel_release_load_detect_pipe+0x4f/0x90 [i915]
[ 4.254573] [<f8baf085>] ? intel_tv_detect+0x385/0x5b0 [i915]
[ 4.254582] [<f8857f9d>] ? drm_helper_probe_single_connector_modes+0x42d/0x550 [drm_kms_helper]
[ 4.254588] [<f8857b70>] ? drm_kms_helper_poll_enable_locked+0xf0/0xf0 [drm_kms_helper]
[ 4.254593] [<f8865cf9>] ? drm_fb_helper_initial_config+0x79/0x425 [drm_kms_helper]
[ 4.254596] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.254598] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.254600] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.254602] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.254605] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.254607] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.254610] [<c101866f>] ? __switch_to+0xef/0x380
[ 4.254666] [<f8b88620>] ? intel_fbdev_fini+0xd0/0xd0 [i915]
[ 4.254721] [<f8b8862e>] ? intel_fbdev_initial_config+0xe/0x30 [i915]
[ 4.254724] [<c1070f83>] ? async_run_entry_fn+0x33/0xd0
[ 4.254726] [<c1069431>] ? process_one_work+0x191/0x3e0
[ 4.254729] [<c10696b7>] ? worker_thread+0x37/0x4e0
[ 4.254732] [<c1069680>] ? process_one_work+0x3e0/0x3e0
[ 4.254734] [<c106e644>] ? kthread+0xa4/0xc0
[ 4.254737] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.254740] [<c106e5a0>] ? kthread_park+0x50/0x50
[ 4.254742] [<c16a3240>] ? ret_from_fork+0x30/0x40
[ 4.254744] ---[ end trace e96a1a7a1ce213ed ]---
[ 4.254748] ------------[ cut here ]------------
[ 4.254805] WARNING: CPU: 0 PID: 6 at drivers/gpu/drm/i915/intel_display.c:6952 verify_connector_state+0x269/0x320 [i915]
[ 4.254806] connector enabled without attached crtc
[ 4.254807] Modules linked in: ppdev evdev joydev input_leds serio_raw pcmcia ipw2200 libipw lib80211 cfg80211 lpc_ich rfkill rng_core snd_intel8x0m snd_intel8x0 snd_ac97_codec i915 ac97_bus snd_pcm yenta_socket pcmcia_rsrc pcmcia_core snd_timer snd soundcore drm_kms_helper parport_pc parport drm i2c_algo_bit fb_sys_fops syscopyarea sysfillrect intel_agp sysimgblt panasonic_laptop intel_gtt sparse_keymap shpchp battery video acpi_cpufreq tpm_tis ac tpm_tis_core tpm button btrfs xor raid6_pq psmouse i2c_i801 i2c_smbus sdhci_pci sdhci mmc_core sky2 thermal rtc_cmos fjes
[ 4.254849] CPU: 0 PID: 6 Comm: kworker/u4:0 Tainted: P W O 4.9.160-antix.2-486-smp #1
[ 4.254851] Hardware name: Matsushita Electric Industrial Co.,Ltd. CF-29N3LGZBM/CF29-5, BIOS V5.00L11 12/20/2005
[ 4.254853] Workqueue: events_unbound async_run_entry_fn
[ 4.254854] 00001b28 c1360ff2 f48c9be0 00000000 c1052c52 f8bd2000 f48c9bf8 00000006
[ 4.254860] f8bcfb24 00001b28 f8b62819 f8b62819 00000009 f6123c00 f66c3c00 f6140224
[ 4.254866] 00000000 c1052cab 00000009 00000000 f48c9be0 f8bd2000 f48c9bf8 f8b62819
[ 4.254872] Call Trace:
[ 4.254875] [<c1360ff2>] ? dump_stack+0x55/0x73
[ 4.254878] [<c1052c52>] ? __warn+0xe2/0x100
[ 4.254934] [<f8b62819>] ? verify_connector_state+0x269/0x320 [i915]
[ 4.254990] [<f8b62819>] ? verify_connector_state+0x269/0x320 [i915]
[ 4.254992] [<c1052cab>] ? warn_slowpath_fmt+0x3b/0x40
[ 4.255025] [<f8b62819>] ? verify_connector_state+0x269/0x320 [i915]
[ 4.255025] [<f8b456c0>] ? gen2_read8+0x130/0x130 [i915]
[ 4.255025] [<f8b6c119>] ? intel_atomic_commit_tail+0xbb9/0xf60 [i915]
[ 4.255025] [<f8861444>] ? drm_atomic_helper_setup_commit+0x2e4/0x370 [drm_kms_helper]
[ 4.255025] [<f8b6c7ee>] ? intel_atomic_commit+0x32e/0x4b0 [i915]
[ 4.255025] [<f8b6c4c0>] ? intel_atomic_commit_tail+0xf60/0xf60 [i915]
[ 4.255025] [<f8b456c0>] ? gen2_read8+0x130/0x130 [i915]
[ 4.255025] [<f87b5316>] ? drm_atomic_commit+0x46/0x50 [drm]
[ 4.255025] [<f8b717af>] ? intel_release_load_detect_pipe+0x4f/0x90 [i915]
[ 4.255025] [<f8baf085>] ? intel_tv_detect+0x385/0x5b0 [i915]
[ 4.255025] [<f8857f9d>] ? drm_helper_probe_single_connector_modes+0x42d/0x550 [drm_kms_helper]
[ 4.255025] [<f8857b70>] ? drm_kms_helper_poll_enable_locked+0xf0/0xf0 [drm_kms_helper]
[ 4.255025] [<f8865cf9>] ? drm_fb_helper_initial_config+0x79/0x425 [drm_kms_helper]
[ 4.255025] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.255025] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.255025] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.255025] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.255025] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.255025] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.255025] [<c101866f>] ? __switch_to+0xef/0x380
[ 4.255025] [<f8b88620>] ? intel_fbdev_fini+0xd0/0xd0 [i915]
[ 4.255025] [<f8b8862e>] ? intel_fbdev_initial_config+0xe/0x30 [i915]
[ 4.255025] [<c1070f83>] ? async_run_entry_fn+0x33/0xd0
[ 4.255025] [<c1069431>] ? process_one_work+0x191/0x3e0
[ 4.255025] [<c10696b7>] ? worker_thread+0x37/0x4e0
[ 4.255025] [<c1069680>] ? process_one_work+0x3e0/0x3e0
[ 4.255025] [<c106e644>] ? kthread+0xa4/0xc0
[ 4.255025] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.255025] [<c106e5a0>] ? kthread_park+0x50/0x50
[ 4.255025] [<c16a3240>] ? ret_from_fork+0x30/0x40
[ 4.255636] ---[ end trace e96a1a7a1ce213ee ]---
[ 4.256494] ------------[ cut here ]------------
[ 4.256553] WARNING: CPU: 0 PID: 6 at drivers/gpu/drm/i915/intel_fbdev.c:414 intel_fb_initial_config+0x484/0x620 [i915]
[ 4.256554] WARN_ON(!connector->state->crtc)
[ 4.256555] Modules linked in:
[ 4.256556] ppdev evdev joydev input_leds serio_raw pcmcia ipw2200 libipw lib80211 cfg80211 lpc_ich rfkill rng_core snd_intel8x0m snd_intel8x0 snd_ac97_codec i915 ac97_bus snd_pcm yenta_socket pcmcia_rsrc pcmcia_core snd_timer snd soundcore drm_kms_helper parport_pc parport drm i2c_algo_bit fb_sys_fops syscopyarea sysfillrect intel_agp sysimgblt panasonic_laptop intel_gtt sparse_keymap shpchp battery video acpi_cpufreq tpm_tis ac tpm_tis_core tpm button btrfs xor raid6_pq psmouse i2c_i801 i2c_smbus sdhci_pci sdhci mmc_core sky2 thermal rtc_cmos fjes
[ 4.256599] CPU: 0 PID: 6 Comm: kworker/u4:0 Tainted: P W O 4.9.160-antix.2-486-smp #1
[ 4.256600] Hardware name: Matsushita Electric Industrial Co.,Ltd. CF-29N3LGZBM/CF29-5, BIOS V5.00L11 12/20/2005
[ 4.256602] Workqueue: events_unbound async_run_entry_fn
[ 4.256604] 0000019e c1360ff2 f48c9da4 00000000 c1052c52 f8be3193 f48c9dbc 00000006
[ 4.256610] f8bd6628 0000019e f8b87eb4 f8b87eb4 00000009 00000001 f6123c00 00000003
[ 4.256616] 00000000 c1052cab 00000009 00000000 f48c9da4 f8be3193 f48c9dbc f8b87eb4
[ 4.256622] Call Trace:
[ 4.256626] [<c1360ff2>] ? dump_stack+0x55/0x73
[ 4.256628] [<c1052c52>] ? __warn+0xe2/0x100
[ 4.256684] [<f8b87eb4>] ? intel_fb_initial_config+0x484/0x620 [i915]
[ 4.256739] [<f8b87eb4>] ? intel_fb_initial_config+0x484/0x620 [i915]
[ 4.256742] [<c1052cab>] ? warn_slowpath_fmt+0x3b/0x40
[ 4.256797] [<f8b87eb4>] ? intel_fb_initial_config+0x484/0x620 [i915]
[ 4.256853] [<f8b87a30>] ? intelfb_create+0x480/0x480 [i915]
[ 4.256858] [<f886527c>] ? drm_setup_crtcs+0x1ac/0x990 [drm_kms_helper]
[ 4.256870] [<f87b8472>] ? drm_mode_connector_update_edid_property+0x42/0x60 [drm]
[ 4.256877] [<f8857b70>] ? drm_kms_helper_poll_enable_locked+0xf0/0xf0 [drm_kms_helper]
[ 4.256882] [<f8865d18>] ? drm_fb_helper_initial_config+0x98/0x425 [drm_kms_helper]
[ 4.256885] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.256887] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.256889] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.256892] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.256894] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.256896] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.256899] [<c101866f>] ? __switch_to+0xef/0x380
[ 4.256955] [<f8b88620>] ? intel_fbdev_fini+0xd0/0xd0 [i915]
[ 4.257004] [<f8b8862e>] ? intel_fbdev_initial_config+0xe/0x30 [i915]
[ 4.257004] [<c1070f83>] ? async_run_entry_fn+0x33/0xd0
[ 4.257004] [<c1069431>] ? process_one_work+0x191/0x3e0
[ 4.257004] [<c10696b7>] ? worker_thread+0x37/0x4e0
[ 4.257004] [<c1069680>] ? process_one_work+0x3e0/0x3e0
[ 4.257004] [<c106e644>] ? kthread+0xa4/0xc0
[ 4.257004] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.257004] [<c106e5a0>] ? kthread_park+0x50/0x50
[ 4.257004] [<c16a3240>] ? ret_from_fork+0x30/0x40
[ 4.257045] ---[ end trace e96a1a7a1ce213ef ]---
[ 4.261061] fbcon: inteldrmfb (fb0) is primary device
[ 4.261632] ------------[ cut here ]------------
[ 4.261647] WARNING: CPU: 0 PID: 6 at drivers/gpu/drm/drm_atomic_helper.c:783 drm_atomic_helper_update_legacy_modeset_state+0x20f/0x240 [drm_kms_helper]
[ 4.261687] Modules linked in: ppdev evdev joydev input_leds serio_raw pcmcia ipw2200 libipw lib80211 cfg80211 lpc_ich rfkill rng_core snd_intel8x0m snd_intel8x0 snd_ac97_codec i915 ac97_bus snd_pcm yenta_socket pcmcia_rsrc pcmcia_core snd_timer snd soundcore drm_kms_helper parport_pc parport drm i2c_algo_bit fb_sys_fops syscopyarea sysfillrect intel_agp sysimgblt panasonic_laptop intel_gtt sparse_keymap shpchp battery video acpi_cpufreq tpm_tis ac tpm_tis_core tpm button btrfs xor raid6_pq psmouse i2c_i801 i2c_smbus sdhci_pci sdhci mmc_core sky2 thermal rtc_cmos fjes
[ 4.261691] CPU: 0 PID: 6 Comm: kworker/u4:0 Tainted: P W O 4.9.160-antix.2-486-smp #1
[ 4.261693] Hardware name: Matsushita Electric Industrial Co.,Ltd. CF-29N3LGZBM/CF29-5, BIOS V5.00L11 12/20/2005
[ 4.261700] Workqueue: events_unbound async_run_entry_fn
[ 4.261705] 0000030f c1360ff2 00000000 00000000 c1052c52 c17cc8dc 00000000 00000006
[ 4.261710] f88684bc 0000030f f885e83f f885e83f 00000009 f6123c00 00000000 f66c3c00
[ 4.261715] f6111000 c1052d13 00000009 00000000 00000000 f885e83f f8b6afcd f6140000
[ 4.261715] Call Trace:
[ 4.261722] [<c1360ff2>] ? dump_stack+0x55/0x73
[ 4.261725] [<c1052c52>] ? __warn+0xe2/0x100
[ 4.261731] [<f885e83f>] ? drm_atomic_helper_update_legacy_modeset_state+0x20f/0x240 [drm_kms_helper]
[ 4.261737] [<f885e83f>] ? drm_atomic_helper_update_legacy_modeset_state+0x20f/0x240 [drm_kms_helper]
[ 4.261740] [<c1052d13>] ? warn_slowpath_null+0x23/0x30
[ 4.261746] [<f885e83f>] ? drm_atomic_helper_update_legacy_modeset_state+0x20f/0x240 [drm_kms_helper]
[ 4.261832] [<f8b6afcd>] ? intel_pre_plane_update+0x4d/0x140 [i915]
[ 4.261889] [<f8b6bfce>] ? intel_atomic_commit_tail+0xa6e/0xf60 [i915]
[ 4.261896] [<f8861444>] ? drm_atomic_helper_setup_commit+0x2e4/0x370 [drm_kms_helper]
[ 4.261903] [<f885e324>] ? drm_atomic_helper_prepare_planes+0x54/0x110 [drm_kms_helper]
[ 4.261959] [<f8b6c7ee>] ? intel_atomic_commit+0x32e/0x4b0 [i915]
[ 4.262005] [<f8b6c4c0>] ? intel_atomic_commit_tail+0xf60/0xf60 [i915]
[ 4.262005] [<f87b5316>] ? drm_atomic_commit+0x46/0x50 [drm]
[ 4.262005] [<f8863efb>] ? restore_fbdev_mode+0x14b/0x290 [drm_kms_helper]
[ 4.262005] [<f87b419c>] ? drm_modeset_lock_all_ctx+0x8c/0xa0 [drm]
[ 4.262005] [<f8865bbf>] ? drm_fb_helper_restore_fbdev_mode_unlocked+0x1f/0x70 [drm_kms_helper]
[ 4.262005] [<f8865c35>] ? drm_fb_helper_set_par+0x25/0x70 [drm_kms_helper]
[ 4.262005] [<f8b8754d>] ? intel_fbdev_set_par+0xd/0x70 [i915]
[ 4.262005] [<c140e3e0>] ? fbcon_init+0x5b0/0x600
[ 4.262005] [<c13e507e>] ? con_release_unimap+0x7e/0xc0
[ 4.262005] [<c13e6638>] ? visual_init+0xb8/0x110
[ 4.262005] [<c13e764d>] ? do_bind_con_driver+0x17d/0x380
[ 4.262005] [<c13e7b5e>] ? do_take_over_console+0x11e/0x1a0
[ 4.262005] [<c1410360>] ? fbcon_switch+0x6b0/0x6b0
[ 4.262005] [<c140c9ff>] ? do_fbcon_takeover+0x4f/0xc0
[ 4.262005] [<c106f936>] ? notifier_call_chain+0x46/0x70
[ 4.262005] [<c106fb93>] ? __blocking_notifier_call_chain+0x33/0x60
[ 4.262005] [<c106fbd7>] ? blocking_notifier_call_chain+0x17/0x20
[ 4.262005] [<c1419fb3>] ? register_framebuffer+0x1e3/0x320
[ 4.262005] [<f8865eec>] ? drm_fb_helper_initial_config+0x26c/0x425 [drm_kms_helper]
[ 4.262005] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.262005] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.262005] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.262005] [<c16a31e7>] ? __switch_to_asm+0x27/0x50
[ 4.262005] [<f8b88620>] ? intel_fbdev_fini+0xd0/0xd0 [i915]
[ 4.262005] [<f8b8862e>] ? intel_fbdev_initial_config+0xe/0x30 [i915]
[ 4.262005] [<c1070f83>] ? async_run_entry_fn+0x33/0xd0
[ 4.262005] [<c1069431>] ? process_one_work+0x191/0x3e0
[ 4.262005] [<c10696b7>] ? worker_thread+0x37/0x4e0
[ 4.262005] [<c1069680>] ? process_one_work+0x3e0/0x3e0
[ 4.262005] [<c106e644>] ? kthread+0xa4/0xc0
[ 4.262005] [<c16a31f3>] ? __switch_to_asm+0x33/0x50
[ 4.262005] [<c106e5a0>] ? kthread_park+0x50/0x50
[ 4.262005] [<c16a3240>] ? ret_from_fork+0x30/0x40
[ 4.262314] ---[ end trace e96a1a7a1ce213f0 ]---
[ 4.281441] Console: switching to colour frame buffer device 128x48
[ 4.287524] gpio_ich: ACPI BAR is busy, GPI 0 - 15 unavailable
[ 4.289072] gpio_ich: GPIO from 462 to 511 on gpio_ich
[ 4.292140] hub 6-0:1.0: USB hub found
[ 4.292184] hub 6-0:1.0: 2 ports detected
[ 4.292415] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 4.292435] excluding 0xc0000-0xc7fff 0xcc000-0xd3fff 0xe0000-0xfffff
[ 4.292454] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 4.292470] clean
[ 4.292488] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 4.292500] excluding 0x60000000-0x60ffffff
[ 4.302914] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 4.311967] iTCO_vendor_support: vendor-support=0
[ 4.314981] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.320131] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[ 4.323260] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.187292] Adding 2882556k swap on /dev/sda3. Priority:-1 extents:1 across:2882556k SSFS
[ 5.214256] EXT4-fs (sda2): re-mounted. Opts: (null)
[ 5.427349] device-mapper: uevent: version 1.0.3
[ 5.428512] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@xxxxxxxxxx
[ 5.569704] lp0: using parport0 (interrupt-driven).
[ 5.569708] lp0: console ready
[ 5.853677] urandom_read: 2 callbacks suppressed
[ 5.853679] random: dd: uninitialized urandom read (512 bytes read)
[ 5.947362] networking: ifup eth0
[ 5.947643] networking: ifup eth1
[ 5.988946] networking done
[ 6.105037] NET: Registered protocol family 17
[ 6.114486] sky2 0000:02:00.0 eth0: enabling interface
[ 6.148292] random: wpa_supplicant: uninitialized urandom read (32 bytes read)
[ 6.158041] NET: Registered protocol family 10
[ 6.158474] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.158539] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 6.250670] RPC: Registered named UNIX socket transport module.
[ 6.250674] RPC: Registered udp transport module.
[ 6.250675] RPC: Registered tcp transport module.
[ 6.250676] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 6.259382] FS-Cache: Loaded
[ 6.279816] FS-Cache: Netfs 'nfs' registered for caching
[ 6.297656] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 7.259853] random: cupsd: uninitialized urandom read (4096 bytes read)
[ 7.435675] Bluetooth: Core ver 2.22
[ 7.435701] NET: Registered protocol family 31
[ 7.435702] Bluetooth: HCI device and connection manager initialized
[ 7.435978] Bluetooth: HCI socket layer initialized
[ 7.435982] Bluetooth: L2CAP socket layer initialized
[ 7.435991] Bluetooth: SCO socket layer initialized
[ 7.461749] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 7.461753] Bluetooth: BNEP filters: protocol multicast
[ 7.461761] Bluetooth: BNEP socket layer initialized
[ 9.033083] random: crng init done
[ 69.900054] usb 6-1: new full-speed USB device number 2 using ohci-pci
[ 70.108040] usb 6-1: New USB device found, idVendor=046d, idProduct=c52f
[ 70.108051] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 70.108058] usb 6-1: Product: USB Receiver
[ 70.108064] usb 6-1: Manufacturer: Logitech
[ 70.677236] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1e.0/0000:06:01.0/0000:07:00.1/usb6/6-1/6-1:1.0/0003:046D:C52F.0001/input/input9
[ 70.730151] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:07:00.1-1/input0
[ 70.736188] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1e.0/0000:06:01.0/0000:07:00.1/usb6/6-1/6-1:1.1/0003:046D:C52F.0002/input/input10
[ 70.835289] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:07:00.1-1/input1
[ 551.465218] ohci-pci 0000:07:00.0: HC died; cleaning up
[ 551.465245] ohci-pci 0000:07:00.1: HC died; cleaning up
[ 551.465261] ehci-pci 0000:07:00.2: HC died; cleaning up
[ 551.465304] pcmcia_socket pcmcia_socket0: pccard: card ejected from slot 0
[ 551.465619] usb 6-1: USB disconnect, device number 2
[ 551.497135] ohci-pci 0000:07:00.0: remove, state 4
[ 551.497148] usb usb5: USB disconnect, device number 1
[ 551.497673] ohci-pci 0000:07:00.0: USB bus 5 deregistered
[ 551.498061] ohci-pci 0000:07:00.1: remove, state 1
[ 551.498076] usb usb6: USB disconnect, device number 1
[ 551.498709] ohci-pci 0000:07:00.1: USB bus 6 deregistered
[ 551.499045] ehci-pci 0000:07:00.2: remove, state 4
[ 551.499210] usb usb7: USB disconnect, device number 1
[ 551.499732] ehci-pci 0000:07:00.2: USB bus 7 deregistered
[ 632.984046] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 632.984074] pci 0000:07:00.0: [1033:0035] type 00 class 0x0c0310
[ 632.984100] pci 0000:07:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 632.984216] pci 0000:07:00.0: supports D1 D2
[ 632.984219] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot
[ 632.984380] pci 0000:07:00.1: [1033:0035] type 00 class 0x0c0310
[ 632.984400] pci 0000:07:00.1: reg 0x10: [mem 0x00000000-0x00000fff]
[ 632.984494] pci 0000:07:00.1: supports D1 D2
[ 632.984497] pci 0000:07:00.1: PME# supported from D0 D1 D2 D3hot
[ 632.984597] pci 0000:07:00.2: [1033:00e0] type 00 class 0x0c0320
[ 632.984617] pci 0000:07:00.2: reg 0x10: [mem 0x00000000-0x000000ff]
[ 632.984711] pci 0000:07:00.2: supports D1 D2
[ 632.984714] pci 0000:07:00.2: PME# supported from D0 D1 D2 D3hot
[ 632.984816] pci 0000:07:00.0: BAR 0: assigned [mem 0x88000000-0x88000fff]
[ 632.984823] pci 0000:07:00.1: BAR 0: assigned [mem 0x88001000-0x88001fff]
[ 632.984830] pci 0000:07:00.2: BAR 0: assigned [mem 0x88002000-0x880020ff]
[ 632.984870] pci 0000:07:00.0: enabling device (0000 -> 0002)
[ 632.985204] ohci-pci 0000:07:00.0: OHCI PCI host controller
[ 632.985215] ohci-pci 0000:07:00.0: new USB bus registered, assigned bus number 5
[ 632.985253] ohci-pci 0000:07:00.0: irq 20, io mem 0x88000000
[ 633.067331] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 633.067337] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 633.067342] usb usb5: Product: OHCI PCI host controller
[ 633.067346] usb usb5: Manufacturer: Linux 4.9.160-antix.2-486-smp ohci_hcd
[ 633.067349] usb usb5: SerialNumber: 0000:07:00.0
[ 633.070808] hub 5-0:1.0: USB hub found
[ 633.070824] hub 5-0:1.0: 3 ports detected
[ 633.071132] pci 0000:07:00.1: enabling device (0000 -> 0002)
[ 633.071448] ohci-pci 0000:07:00.1: OHCI PCI host controller
[ 633.071458] ohci-pci 0000:07:00.1: new USB bus registered, assigned bus number 6
[ 633.071488] ohci-pci 0000:07:00.1: irq 20, io mem 0x88001000
[ 633.153112] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 633.153115] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 633.153117] usb usb6: Product: OHCI PCI host controller
[ 633.153120] usb usb6: Manufacturer: Linux 4.9.160-antix.2-486-smp ohci_hcd
[ 633.153122] usb usb6: SerialNumber: 0000:07:00.1
[ 633.156329] hub 6-0:1.0: USB hub found
[ 633.156343] hub 6-0:1.0: 2 ports detected
[ 633.156503] pci 0000:07:00.2: enabling device (0000 -> 0002)
[ 633.157895] ehci-pci 0000:07:00.2: EHCI Host Controller
[ 633.157904] ehci-pci 0000:07:00.2: new USB bus registered, assigned bus number 7
[ 633.157951] ehci-pci 0000:07:00.2: irq 20, io mem 0x88002000
[ 633.164054] ehci-pci 0000:07:00.2: USB 2.0 started, EHCI 1.00
[ 633.164124] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 633.164129] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 633.164133] usb usb7: Product: EHCI Host Controller
[ 633.164137] usb usb7: Manufacturer: Linux 4.9.160-antix.2-486-smp ehci_hcd
[ 633.164141] usb usb7: SerialNumber: 0000:07:00.2
[ 633.164939] hub 7-0:1.0: USB hub found
[ 633.165244] hub 7-0:1.0: 5 ports detected
[ 633.217252] hub 5-0:1.0: USB hub found
[ 633.217287] hub 5-0:1.0: 3 ports detected
[ 633.269209] hub 6-0:1.0: USB hub found
[ 633.269244] hub 6-0:1.0: 2 ports detected
[ 633.812029] usb 6-1: new full-speed USB device number 2 using ohci-pci
[ 634.020046] usb 6-1: New USB device found, idVendor=046d, idProduct=c52f
[ 634.020056] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 634.020063] usb 6-1: Product: USB Receiver
[ 634.020070] usb 6-1: Manufacturer: Logitech
[ 634.038756] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1e.0/0000:06:01.0/0000:07:00.1/usb6/6-1/6-1:1.0/0003:046D:C52F.0003/input/input11
[ 634.091644] hid-generic 0003:046D:C52F.0003: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:07:00.1-1/input0
[ 634.112301] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1e.0/0000:06:01.0/0000:07:00.1/usb6/6-1/6-1:1.1/0003:046D:C52F.0004/input/input12
[ 634.197515] hid-generic 0003:046D:C52F.0004: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:07:00.1-1/input1
[ 669.567479] ohci-pci 0000:07:00.0: HC died; cleaning up
[ 669.567505] ohci-pci 0000:07:00.1: HC died; cleaning up
[ 669.567520] ehci-pci 0000:07:00.2: HC died; cleaning up
[ 669.567609] pcmcia_socket pcmcia_socket0: pccard: card ejected from slot 0
[ 669.567929] usb 6-1: USB disconnect, device number 2
[ 669.599138] ohci-pci 0000:07:00.0: remove, state 4
[ 669.599151] usb usb5: USB disconnect, device number 1
[ 669.599477] ohci-pci 0000:07:00.0: USB bus 5 deregistered
[ 669.599719] ohci-pci 0000:07:00.1: remove, state 1
[ 669.599728] usb usb6: USB disconnect, device number 1
[ 669.600037] ohci-pci 0000:07:00.1: USB bus 6 deregistered
[ 669.600229] ehci-pci 0000:07:00.2: remove, state 4
[ 669.600238] usb usb7: USB disconnect, device number 1
[ 669.600871] ehci-pci 0000:07:00.2: USB bus 7 deregistered
[ 1067.904057] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0
[ 1067.904098] pci 0000:07:00.0: [1033:0035] type 00 class 0x0c0310
[ 1067.904135] pci 0000:07:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 1067.904283] pci 0000:07:00.0: supports D1 D2
[ 1067.904290] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot
[ 1067.904600] pci 0000:07:00.1: [1033:0035] type 00 class 0x0c0310
[ 1067.904630] pci 0000:07:00.1: reg 0x10: [mem 0x00000000-0x00000fff]
[ 1067.904762] pci 0000:07:00.1: supports D1 D2
[ 1067.904769] pci 0000:07:00.1: PME# supported from D0 D1 D2 D3hot
[ 1067.905034] pci 0000:07:00.2: [1033:00e0] type 00 class 0x0c0320
[ 1067.905065] pci 0000:07:00.2: reg 0x10: [mem 0x00000000-0x000000ff]
[ 1067.907139] pci 0000:07:00.2: supports D1 D2
[ 1067.907147] pci 0000:07:00.2: PME# supported from D0 D1 D2 D3hot
[ 1067.907410] pci 0000:07:00.0: BAR 0: assigned [mem 0x88000000-0x88000fff]
[ 1067.907424] pci 0000:07:00.1: BAR 0: assigned [mem 0x88001000-0x88001fff]
[ 1067.907436] pci 0000:07:00.2: BAR 0: assigned [mem 0x88002000-0x880020ff]
[ 1067.907493] pci 0000:07:00.0: enabling device (0000 -> 0002)
[ 1067.909146] ohci-pci 0000:07:00.0: OHCI PCI host controller
[ 1067.909171] ohci-pci 0000:07:00.0: new USB bus registered, assigned bus number 5
[ 1067.909232] ohci-pci 0000:07:00.0: irq 20, io mem 0x88000000
[ 1067.991967] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1067.991973] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1067.991975] usb usb5: Product: OHCI PCI host controller
[ 1067.991978] usb usb5: Manufacturer: Linux 4.9.160-antix.2-486-smp ohci_hcd
[ 1067.991980] usb usb5: SerialNumber: 0000:07:00.0
[ 1067.994679] hub 5-0:1.0: USB hub found
[ 1067.995725] hub 5-0:1.0: 3 ports detected
[ 1067.995938] pci 0000:07:00.1: enabling device (0000 -> 0002)
[ 1067.996366] ohci-pci 0000:07:00.1: OHCI PCI host controller
[ 1067.996375] ohci-pci 0000:07:00.1: new USB bus registered, assigned bus number 6
[ 1067.996411] ohci-pci 0000:07:00.1: irq 20, io mem 0x88001000
[ 1068.078220] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1068.078229] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1068.078236] usb usb6: Product: OHCI PCI host controller
[ 1068.078243] usb usb6: Manufacturer: Linux 4.9.160-antix.2-486-smp ohci_hcd
[ 1068.078249] usb usb6: SerialNumber: 0000:07:00.1
[ 1068.081728] hub 6-0:1.0: USB hub found
[ 1068.081743] hub 6-0:1.0: 2 ports detected
[ 1068.081910] pci 0000:07:00.2: enabling device (0000 -> 0002)
[ 1068.083419] ehci-pci 0000:07:00.2: EHCI Host Controller
[ 1068.083429] ehci-pci 0000:07:00.2: new USB bus registered, assigned bus number 7
[ 1068.083476] ehci-pci 0000:07:00.2: irq 20, io mem 0x88002000
[ 1068.090052] ehci-pci 0000:07:00.2: USB 2.0 started, EHCI 1.00
[ 1068.090123] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 1068.090128] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1068.090132] usb usb7: Product: EHCI Host Controller
[ 1068.090136] usb usb7: Manufacturer: Linux 4.9.160-antix.2-486-smp ehci_hcd
[ 1068.090140] usb usb7: SerialNumber: 0000:07:00.2
[ 1068.090940] hub 7-0:1.0: USB hub found
[ 1068.091183] hub 7-0:1.0: 5 ports detected
[ 1068.143254] hub 5-0:1.0: USB hub found
[ 1068.143287] hub 5-0:1.0: 3 ports detected
[ 1068.195207] hub 6-0:1.0: USB hub found
[ 1068.195239] hub 6-0:1.0: 2 ports detected
[ 1068.732049] usb 6-1: new full-speed USB device number 2 using ohci-pci
[ 1068.940023] usb 6-1: New USB device found, idVendor=046d, idProduct=c52f
[ 1068.940030] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1068.940034] usb 6-1: Product: USB Receiver
[ 1068.940037] usb 6-1: Manufacturer: Logitech
[ 1068.958864] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1e.0/0000:06:01.0/0000:07:00.1/usb6/6-1/6-1:1.0/0003:046D:C52F.0005/input/input13
[ 1069.012656] hid-generic 0003:046D:C52F.0005: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:07:00.1-1/input0
[ 1069.033851] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1e.0/0000:06:01.0/0000:07:00.1/usb6/6-1/6-1:1.1/0003:046D:C52F.0006/input/input14
[ 1069.118544] hid-generic 0003:046D:C52F.0006: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:07:00.1-1/input1

lspci -vvv
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller (rev 04)
Subsystem: Matsushita Electric Industrial Co., Ltd. Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information: Len=09 <?>
Kernel modules: intel_agp

00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04) (prog-if 00 [VGA controller])
Subsystem: Matsushita Electric Industrial Co., Ltd. Mobile 915GM/GMS/910GML Express Graphics Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at b0080000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at 1800 [size=8]
Region 2: Memory at c0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at b0000000 (32-bit, non-prefetchable) [size=256K]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: i915
Kernel modules: i915

00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04)
Subsystem: Matsushita Electric Industrial Co., Ltd. Mobile 915GM/GMS/910GML Express Graphics Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at 80000000 (32-bit, non-prefetchable) [disabled] [size=512K]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 24
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: b4000000-b7ffffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0
ExtTag+ RBE-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <256ns, L1 <4us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
Slot #2, PowerLimit 6.500W; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg-
Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
Address: 00000000 Data: 0000
Capabilities: [90] Subsystem: Matsushita Electric Industrial Co., Ltd. 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed+ WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
Status: NegoPending- InProgress-
Capabilities: [180 v1] Root Complex Link
Desc: PortNumber=01 ComponentID=02 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
Addr: 00000000fed1c001
Kernel driver in use: pcieport
Kernel modules: shpchp

00:1d.0 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 (rev 04) (prog-if 00 [UHCI])
Subsystem: Matsushita Electric Industrial Co., Ltd. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd

00:1d.1 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 (rev 04) (prog-if 00 [UHCI])
Subsystem: Matsushita Electric Industrial Co., Ltd. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd

00:1d.2 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 (rev 04) (prog-if 00 [UHCI])
Subsystem: Matsushita Electric Industrial Co., Ltd. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd

00:1d.7 USB controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller (rev 04) (prog-if 20 [EHCI])
Subsystem: Matsushita Electric Industrial Co., Ltd. 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at b0040000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci-pci

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d4) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=06, subordinate=08, sec-latency=32
I/O behind bridge: 00004000-00004fff
Memory behind bridge: b8000000-b80fffff
Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Matsushita Electric Industrial Co., Ltd. 82801 Mobile PCI Bridge

00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 04)
Subsystem: Matsushita Electric Industrial Co., Ltd. 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at 1c00 [size=256]
Region 1: I/O ports at 18c0 [size=64]
Region 2: Memory at b0040800 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at b0040400 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: snd_intel8x0
Kernel modules: snd_intel8x0

00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller (rev 04) (prog-if 00 [Generic])
Subsystem: Matsushita Electric Industrial Co., Ltd. 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Modem Controller
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 2400 [size=256]
Region 1: I/O ports at 2000 [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: snd_intel8x0m
Kernel modules: snd_intel8x0m

00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge (rev 04)
Subsystem: Matsushita Electric Industrial Co., Ltd. 82801FBM (ICH6M) LPC Interface Bridge
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: lpc_ich
Kernel modules: intel_rng, lpc_ich

00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller (rev 04) (prog-if 80 [ISA Compatibility mode-only controller, supports bus mastering])
Subsystem: Matsushita Electric Industrial Co., Ltd. 82801FBM (ICH6M) SATA Controller
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at 1890 [size=16]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ata_piix

00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller (rev 04)
Subsystem: Matsushita Electric Industrial Co., Ltd. 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 18a0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c_i801

02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller (rev 19)
Subsystem: Matsushita Electric Industrial Co., Ltd. Marvell 88E8053 Gigabit Ethernet Controller (Panasonic)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 25
Region 0: Memory at b4000000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at 3000 [size=256]
[virtual] Expansion ROM at b4020000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Product Name: Marvell Yukon 88E8053 Gigabit Ethernet Controller
Read-only fields:
[PN] Part number: Yukon 88E8053
[EC] Engineering changes: Rev. 1.9
[MN] Manufacture ID: 4d 61 72 76 65 6c 6c
[SN] Serial number: AbCdEfG962650
[CP] Extended capability: 01 10 cc 03
[RV] Reserved: checksum good, 9 byte(s) reserved
Read/write fields:
[RW] Read-write area: 121 byte(s) free
End
Capabilities: [5c] MSI: Enable+ Count=1/2 Maskable- 64bit+
Address: 00000000fee0100c Data: 4122
Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr+ NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Exit Latency L0s <256ns, L1 unlimited
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
AERCap: First Error Pointer: 1f, GenCap- CGenEn- ChkCap- ChkEn-
Kernel driver in use: sky2
Kernel modules: sky2

06:01.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 8b)
Subsystem: Matsushita Electric Industrial Co., Ltd. Panasonic CF-Y5 laptop
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 20
Region 0: Memory at b8000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=06, secondary=07, subordinate=07, sec-latency=176
Memory window 0: 84000000-87ffffff (prefetchable)
Memory window 1: 88000000-8bffffff
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
Capabilities: [dc] Power Management version 2
Flags: PMEClk+ DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME+
Bridge: PM- B3+
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket

06:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 11)
Subsystem: Matsushita Electric Industrial Co., Ltd. Panasonic CF-Y5 laptop
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin C routed to IRQ 19
Region 0: Memory at b8002000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: sdhci-pci
Kernel modules: sdhci_pci

06:02.0 Network controller: Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection (rev 05)
Subsystem: Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 6000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at b8003000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Kernel driver in use: ipw2200
Kernel modules: ipw2200, wl

07:00.0 USB controller: NEC Corporation OHCI USB Controller (rev 43) (prog-if 10 [OHCI])
Subsystem: Adaptec OHCI USB Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at 88000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci-pci

07:00.1 USB controller: NEC Corporation OHCI USB Controller (rev 43) (prog-if 10 [OHCI])
Subsystem: Adaptec OHCI USB Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 20
Region 0: Memory at 88001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: ohci-pci

07:00.2 USB controller: NEC Corporation uPD72010x USB 2.0 Controller (rev 04) (prog-if 20 [EHCI])
Subsystem: Adaptec uPD72010x USB 2.0 Controller
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 68 (4000ns min, 8500ns max), Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 20
Region 0: Memory at 88002000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci-pci

lspcmcia -v -v
Socket 0 Bridge: [yenta_cardbus] (bus ID: 0000:06:01.0)
Configuration: state: on ready: yes

Voltage: 3.3V
Vcc: 3.3V
Vpp: 3.3V

Available IRQs: 3, 4, 7, 10, 11
Available ioports: 0x00000100 - 0x000003af
0x000003e0 - 0x000004ff
0x00000820 - 0x000008ff
0x00000a00 - 0x00000aff
0x00000c00 - 0x00000cf7
0x00004000 - 0x00004fff

Available iomem: 0x000c8000 - 0x000cbfff
0x000d4000 - 0x000dffff
0xa0000000 - 0xa0ffffff
0xb8010000 - 0xb80fffff

CardBus card -- see "lspci" for more information

Next message: Arvind Sankar: "Re: [PATCH] iommu/vt-d: Return the correct dma mask when we are bypassing the IOMMU"
Previous message: Marcel Holtmann: "Re: [PATCHv2 4/4] Bluetooth: btwilink: drop superseded driver"
In reply to: Michael .: "PCMCIA not working on Panasonic Toughbook CF-29"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]