[PATCH 1/3] arm64: dts: imx8mn: Create EVK dtsi file for common use

From: Anson Huang
Date: Wed Oct 16 2019 - 23:16:07 EST

Next message: Anson Huang: "[PATCH 3/3] arm64: dts: imx8mn: Add LPDDR4 EVK board support"
Previous message: Anson Huang: "[PATCH 2/3] dt-bindings: arm: imx: Add the i.MX8MN LPDDR4 EVK board"
Next in thread: Anson Huang: "[PATCH 2/3] dt-bindings: arm: imx: Add the i.MX8MN LPDDR4 EVK board"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

i.MX8MN has different EVK boards to support different DDR types,
the ONLY differences are DDR chips and PMIC, so most of the devices
can be shared between these EVK boards, create a EVK dtsi file for
common use.

Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
---
- This patch is based on https://patchwork.kernel.org/patch/11192221/
---
arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts | 241 +--------------------
arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi | 252 ++++++++++++++++++++++
2 files changed, 253 insertions(+), 240 deletions(-)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi

diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
index 5c96203..0719494 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
@@ -6,71 +6,18 @@
/dts-v1/;

#include "imx8mn.dtsi"
+#include "imx8mn-evk.dtsi"

/ {
model = "NXP i.MX8MNano DDR4 EVK board";
compatible = "fsl,imx8mn-ddr4-evk", "fsl,imx8mn";
-
- chosen {
- stdout-path = &uart2;
- };
-
- gpio-leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpio_led>;
-
- status {
- label = "yellow:status";
- gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
- };
-
- reg_usdhc2_vmmc: regulator-usdhc2 {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
- regulator-name = "VSD_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
};

&A53_0 {
cpu-supply = <&buck2_reg>;
};

-&fec1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec1>;
- phy-mode = "rgmii-id";
- phy-handle = <&ethphy0>;
- fsl,magic-packet;
- status = "okay";
-
- mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- ethphy0: ethernet-phy@0 {
- compatible = "ethernet-phy-ieee802.3-c22";
- reg = <0>;
- at803x,led-act-blind-workaround;
- at803x,eee-disabled;
- at803x,vddio-1p8v;
- };
- };
-};
-
&i2c1 {
- clock-frequency = <400000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1>;
- status = "okay";
-
pmic@4b {
compatible = "rohm,bd71847";
reg = <0x4b>;
@@ -175,196 +122,10 @@
};
};

-&snvs_pwrkey {
- status = "okay";
-};
-
-&uart2 { /* console */
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
- status = "okay";
-};
-
-&usdhc2 {
- assigned-clocks = <&clk IMX8MN_CLK_USDHC2>;
- assigned-clock-rates = <200000000>;
- pinctrl-names = "default", "state_100mhz", "state_200mhz";
- pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
- pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
- pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
- cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- bus-width = <4>;
- vmmc-supply = <&reg_usdhc2_vmmc>;
- status = "okay";
-};
-
-&usdhc3 {
- assigned-clocks = <&clk IMX8MN_CLK_USDHC3_ROOT>;
- assigned-clock-rates = <400000000>;
- pinctrl-names = "default", "state_100mhz", "state_200mhz";
- pinctrl-0 = <&pinctrl_usdhc3>;
- pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
- pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
- bus-width = <8>;
- non-removable;
- status = "okay";
-};
-
-&wdog1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_wdog>;
- fsl,ext-reset-output;
- status = "okay";
-};
-
&iomuxc {
- pinctrl-names = "default";
-
- pinctrl_fec1: fec1grp {
- fsl,pins = <
- MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3
- MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
- MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
- MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
- MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
- MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
- MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
- MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
- MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
- MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
- MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
- MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
- MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
- MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
- MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19
- >;
- };
-
- pinctrl_gpio_led: gpioledgrp {
- fsl,pins = <
- MX8MN_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19
- >;
- };
-
- pinctrl_i2c1: i2c1grp {
- fsl,pins = <
- MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
- MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
- >;
- };
-
pinctrl_pmic: pmicirq {
fsl,pins = <
MX8MN_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41
>;
};
-
- pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
- fsl,pins = <
- MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
- >;
- };
-
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
- MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
- >;
- };
-
- pinctrl_usdhc2_gpio: usdhc2grpgpio {
- fsl,pins = <
- MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4
- >;
- };
-
- pinctrl_usdhc2: usdhc2grp {
- fsl,pins = <
- MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
- MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
- MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
- MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
- MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
- MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
- MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
- >;
- };
-
- pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
- fsl,pins = <
- MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
- MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
- MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
- MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
- MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
- MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
- MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
- >;
- };
-
- pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
- fsl,pins = <
- MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
- MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
- MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
- MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
- MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
- MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
- MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
- >;
- };
-
- pinctrl_usdhc3: usdhc3grp {
- fsl,pins = <
- MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000190
- MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
- MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
- MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
- MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
- MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
- MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
- MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
- MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
- MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
- MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
- >;
- };
-
- pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
- fsl,pins = <
- MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000194
- MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
- MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
- MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
- MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
- MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
- MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
- MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
- MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
- MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
- MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
- >;
- };
-
- pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
- fsl,pins = <
- MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000196
- MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
- MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
- MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
- MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
- MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
- MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
- MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
- MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
- MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
- MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
- >;
- };
-
- pinctrl_wdog: wdoggrp {
- fsl,pins = <
- MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
- >;
- };
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
new file mode 100644
index 0000000..fa9c7cd
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
@@ -0,0 +1,252 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 NXP
+ */
+
+#include "imx8mn.dtsi"
+
+/ {
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_led>;
+
+ status {
+ label = "yellow:status";
+ gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ reg_usdhc2_vmmc: regulator-usdhc2 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+ regulator-name = "VSD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ phy-mode = "rgmii-id";
+ phy-handle = <&ethphy0>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ at803x,led-act-blind-workaround;
+ at803x,eee-disabled;
+ at803x,vddio-1p8v;
+ };
+ };
+};
+
+&i2c1 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+};
+
+&snvs_pwrkey {
+ status = "okay";
+};
+
+&uart2 { /* console */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usdhc2 {
+ assigned-clocks = <&clk IMX8MN_CLK_USDHC2>;
+ assigned-clock-rates = <200000000>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ vmmc-supply = <&reg_usdhc2_vmmc>;
+ status = "okay";
+};
+
+&usdhc3 {
+ assigned-clocks = <&clk IMX8MN_CLK_USDHC3_ROOT>;
+ assigned-clock-rates = <400000000>;
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_ENET_MDC_ENET1_MDC 0x3
+ MX8MN_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3
+ MX8MN_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
+ MX8MN_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
+ MX8MN_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
+ MX8MN_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
+ MX8MN_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
+ MX8MN_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
+ MX8MN_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
+ MX8MN_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
+ MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f
+ MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
+ MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
+ MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
+ MX8MN_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19
+ >;
+ };
+
+ pinctrl_gpio_led: gpioledgrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3
+ MX8MN_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3
+ >;
+ };
+
+ pinctrl_reg_usdhc2_vmmc: regusdhc2vmmc {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_UART2_RXD_UART2_DCE_RX 0x140
+ MX8MN_IOMUXC_UART2_TXD_UART2_DCE_TX 0x140
+ >;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2grpgpio {
+ fsl,pins = <
+ MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x1c4
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x190
+ MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0
+ MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0
+ MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0
+ MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0
+ MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0
+ MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x194
+ MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d4
+ MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d4
+ MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d4
+ MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d4
+ MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d4
+ MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+ fsl,pins = <
+ MX8MN_IOMUXC_SD2_CLK_USDHC2_CLK 0x196
+ MX8MN_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d6
+ MX8MN_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d6
+ MX8MN_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d6
+ MX8MN_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d6
+ MX8MN_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d6
+ MX8MN_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0x1d0
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000190
+ MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0
+ MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0
+ MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0
+ MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0
+ MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0
+ MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0
+ MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0
+ MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0
+ MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0
+ MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190
+ >;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+ fsl,pins = <
+ MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000194
+ MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4
+ MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4
+ MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4
+ MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4
+ MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4
+ MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4
+ MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4
+ MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4
+ MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4
+ MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194
+ >;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+ fsl,pins = <
+ MX8MN_IOMUXC_NAND_WE_B_USDHC3_CLK 0x40000196
+ MX8MN_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6
+ MX8MN_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6
+ MX8MN_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6
+ MX8MN_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6
+ MX8MN_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6
+ MX8MN_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6
+ MX8MN_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6
+ MX8MN_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6
+ MX8MN_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6
+ MX8MN_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196
+ >;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <
+ MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6
+ >;
+ };
+};
--
2.7.4

Next message: Anson Huang: "[PATCH 3/3] arm64: dts: imx8mn: Add LPDDR4 EVK board support"
Previous message: Anson Huang: "[PATCH 2/3] dt-bindings: arm: imx: Add the i.MX8MN LPDDR4 EVK board"
Next in thread: Anson Huang: "[PATCH 2/3] dt-bindings: arm: imx: Add the i.MX8MN LPDDR4 EVK board"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]