[PATCH RESEND v7 0/6] Add MediaTek MUSB Controller Driver
From: min.guo
Date: Thu Oct 17 2019 - 04:26:22 EST
From: Min Guo <min.guo@xxxxxxxxxxxx>
These patches introduce the MediaTek MUSB controller driver.
The driver can be configured as Dual-Role Device (DRD),
Peripheral Only and Host Only modes. This has beed tested on
MT2701 with a variety of devices in host mode and with the
f_mass gadget driver in peripheral mode, plugging otg cables
in/out a lot of times in all possible imaginable plug orders.
changes in v7:
changes of dt-bindings and DTS:
1. Change compatible string
2. Change usb connector child node compatible as "gpio-usb-b-connector"
changes in v6:
changes of dt-bindings:
1. Modify usb connector child node
changes of DTS:
1. Modify usb connector child node
changes of driver:
1. Add of_platform_populate in probe to populate connector platform_devices
from device tree data
2. Replace extcon with usb role switch mechanism to support dual-role mode,
depends on [1]
3. Remove set vbus function
[1] [v6,09/10] usb: roles: add USB Type-B GPIO connector driver
https://patchwork.kernel.org/patch/10966361/
changes in v5:
changes of dt-bindings suggested by Rob:
1. Modify compatible as
- compatible : should be one of:
"mediatek,mt-2701"
...
followed by "mediatek,mtk-musb"
2. Add usb connector child node
changes of DTS:
1. Add usb connector child node
changes of driver suggested by Bin:
1. Replace musb_readb() with musb_clearb() to clear dma pending interrupts
2. Replace musb_readb() with musb_clearb() to clear common/tx/rx pending interrupts
3. Make musb_clearb/w() return the value of musb_readb/w()
changes in v4:
changes of dt-bindings suggested by Sergei:
1. String alignment
changes of driver suggested by Tony and Bin:
1. Add a new patch for set/get_toggle()
2. Add a new patch for noirq type of dma
3. Add a new patch musb_clearb/w()
4. Abondon patch "usb: musb: Delete the const attribute of addr parameter in readb/w/l hooks"
changes in v3:
changes of driver suggested by Bin:
1. Add a new patch for musb_readb/w/l() to remove const attribute
2. Use is_out as function parameter in set_toggle/get_toggle() hooks
3. Remove 'u8/u16 data' parameter in clearb/w() hooks
4. Remove musb_default_clearb/w()
5. Replace musb_readb/w() with musb_clearb/w() to clear pending interrupts
6. Add comments to clearb/w() hooks
7. Replace musb_save_toggle() with musb->io.get_toggle()
8. Replace musb_set_toggle() with musb->io.set_toggle()
changes in v2:
changes of dt-bindings suggested by Rob and Bin:
1. Modify DRC to DRD
2. Drop the "<soc-model>-musb" in compatible
3. Remove phy-names
4. Add space after comma in clock-names
dtsi:
1. Remove phy-names
changes of driver suggested by Bin:
1. Add a new patch for musb_set_toggle
2. Add summarize of MediaTek musb controller differences in the commit log
3. Abondon patch "usb: musb: Move musbhsdma macro definition to musb_dma.h"
4. Add "|| COMPILE_TEST" in Kconfig
5. Add musb_clearb() and musb_clearw() hooks
6. Add get_toggle() and set_toggle() hooks
7. Replace musb_readl() with musb_readw() to read 16bit toggle register
8. Move MediaTek's private toggle registers from musb_regs.h to mediatek.c
9. Create musbhs_dma_controller_create_noirq()
Min Guo (6):
dt-bindings: usb: musb: Add support for MediaTek musb controller
arm: dts: mt2701: Add usb2 device nodes
usb: musb: Add get/set toggle hooks
usb: musb: Add noirq type of dma create interface
usb: musb: Add musb_clearb/w() interface
usb: musb: Add support for MediaTek musb controller
.../devicetree/bindings/usb/mediatek,musb.txt | 55 ++
arch/arm/boot/dts/mt2701-evb.dts | 21 +
arch/arm/boot/dts/mt2701.dtsi | 33 ++
drivers/usb/musb/Kconfig | 9 +-
drivers/usb/musb/Makefile | 1 +
drivers/usb/musb/mediatek.c | 582 +++++++++++++++++++++
drivers/usb/musb/musb_core.c | 74 ++-
drivers/usb/musb/musb_core.h | 13 +-
drivers/usb/musb/musb_dma.h | 9 +
drivers/usb/musb/musb_host.c | 46 +-
drivers/usb/musb/musb_io.h | 12 +-
drivers/usb/musb/musbhsdma.c | 56 +-
drivers/usb/musb/sunxi.c | 4 +-
drivers/usb/musb/tusb6010.c | 2 +-
14 files changed, 845 insertions(+), 72 deletions(-)
create mode 100644 Documentation/devicetree/bindings/usb/mediatek,musb.txt
create mode 100644 drivers/usb/musb/mediatek.c
--
1.9.1