[PATCH v2 2/3] tty: serial: lpuart: Use defines that correspond to correct register

[Philippe Schenker]

Use define from the 32-bit register description UARTMODIR_* instead of
UARTMODEM_*. The value is the same, so there is no functional change.

Signed-off-by: Philippe Schenker <philippe.schenker@xxxxxxxxxxx>
Reviewed-by: Stefan Agner <stefan.agner@xxxxxxxxxxx>
Reviewed-by: Fugang Duan <fugang.duan@xxxxxxx>

---

Changes in v2:
- Changed commit message to Stefans suggestions
- Added Stefan's and Fugang's reviewed tag

 drivers/tty/serial/fsl_lpuart.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index f3271857621c..346b4a070ce9 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1879,10 +1879,10 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
 	}
 
 	if (termios->c_cflag & CRTSCTS) {
-		modem |= UARTMODEM_RXRTSE | UARTMODEM_TXCTSE;
+		modem |= (UARTMODIR_RXRTSE | UARTMODIR_TXCTSE);
 	} else {
 		termios->c_cflag &= ~CRTSCTS;
-		modem &= ~(UARTMODEM_RXRTSE | UARTMODEM_TXCTSE);
+		modem &= ~(UARTMODIR_RXRTSE | UARTMODIR_TXCTSE);
 	}
 
 	if (termios->c_cflag & CSTOPB)
-- 
2.23.0