[PATCH RESEND v3 0/4] arm64: meson: add support for A1 Power Domains

[Jianxin Pan]

This patchset introduces a "Secure Power Doamin Controller". In A1/C1, power
controller registers such as PWRCTRL_FOCRSTN, PWRCTRL_PWR_OFF, PWRCTRL_MEM_PD
and PWRCTRL_ISO_EN, are in the secure domain, and should be accessed from ATF
by smc.


Changes since v1 at [1]:
- update domain id
- include dt-bindings in dts

Changes since v1 at [0]:
- use APIs from sm driver
- rename pwrc_secure_get_power as Kevin suggested
- add comments for always on domains
- replace arch_initcall_sync with builtin_platform_driver
- fix coding style

[0]  https://lore.kernel.org/linux-amlogic/1568895064-4116-1-git-send-email-jianxin.pan@xxxxxxxxxxx
[1]  https://lore.kernel.org/linux-amlogic/1570695678-42623-1-git-send-email-jianxin.pan@xxxxxxxxxxx

Jianxin Pan (4):
  dt-bindings: power: add Amlogic secure power domains bindings
  firmware: meson_sm: Add secure power domain support
  soc: amlogic: Add support for Secure power domains controller
  arm64: dts: meson: a1: add secure power domain controller

 .../bindings/power/amlogic,meson-sec-pwrc.yaml     |  42 +++++
 arch/arm64/boot/dts/amlogic/meson-a1.dtsi          |   8 +
 drivers/firmware/meson/meson_sm.c                  |   2 +
 drivers/soc/amlogic/Kconfig                        |  13 ++
 drivers/soc/amlogic/Makefile                       |   1 +
 drivers/soc/amlogic/meson-secure-pwrc.c            | 204 +++++++++++++++++++++
 include/dt-bindings/power/meson-a1-power.h         |  32 ++++
 include/linux/firmware/meson/meson_sm.h            |   2 +
 8 files changed, 304 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/amlogic,meson-sec-pwrc.yaml
 create mode 100644 drivers/soc/amlogic/meson-secure-pwrc.c
 create mode 100644 include/dt-bindings/power/meson-a1-power.h

-- 
2.7.4