[PATCH 38/46] video: backlight: tosa: use gpio lookup table
From: Arnd Bergmann
Date: Fri Oct 18 2019 - 11:43:00 EST
The driver should not require a machine specific header. Change
it to pass the gpio line through a lookup table, and move the
timing generator definitions into the drivers itself.
Cc: Lee Jones <lee.jones@xxxxxxxxxx>
Cc: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
Cc: Jingoo Han <jingoohan1@xxxxxxxxx>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
Cc: dri-devel@xxxxxxxxxxxxxxxxxxxxx
Cc: linux-fbdev@xxxxxxxxxxxxxxx
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
---
I'm not overly confident that I got the correct device names
for the lookup table, it would be good if someone could
double-check.
---
arch/arm/mach-pxa/include/mach/tosa.h | 15 --------------
arch/arm/mach-pxa/tosa.c | 22 +++++++++++++++++++++
drivers/video/backlight/tosa_bl.c | 10 +++++-----
drivers/video/backlight/tosa_bl.h | 8 ++++++++
drivers/video/backlight/tosa_lcd.c | 28 ++++++++++++++++++++-------
5 files changed, 56 insertions(+), 27 deletions(-)
create mode 100644 drivers/video/backlight/tosa_bl.h
diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h
index a499ed17931e..8bfaca3a8b64 100644
--- a/arch/arm/mach-pxa/include/mach/tosa.h
+++ b/arch/arm/mach-pxa/include/mach/tosa.h
@@ -72,18 +72,6 @@
#define TOSA_GPIO_BAT0_TH_ON (TOSA_TC6393XB_GPIO_BASE + 14)
#define TOSA_GPIO_BAT1_TH_ON (TOSA_TC6393XB_GPIO_BASE + 15)
-/*
- * Timing Generator
- */
-#define TG_PNLCTL 0x00
-#define TG_TPOSCTL 0x01
-#define TG_DUTYCTL 0x02
-#define TG_GPOSR 0x03
-#define TG_GPODR1 0x04
-#define TG_GPODR2 0x05
-#define TG_PINICTL 0x06
-#define TG_HPOSCTL 0x07
-
/*
* PXA GPIOs
*/
@@ -192,7 +180,4 @@
#define TOSA_KEY_MAIL KEY_MAIL
#endif
-struct spi_device;
-extern int tosa_bl_enable(struct spi_device *spi, int enable);
-
#endif /* _ASM_ARCH_TOSA_H_ */
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index 9a7f1e42adac..8329a2969b2b 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -813,6 +813,26 @@ static struct pxa2xx_spi_controller pxa_ssp_master_info = {
.num_chipselect = 1,
};
+static struct gpiod_lookup_table tosa_lcd_gpio_table = {
+ .dev_id = "spi2.0",
+ .table = {
+ GPIO_LOOKUP("tc6393xb",
+ TOSA_GPIO_TG_ON - TOSA_TC6393XB_GPIO_BASE,
+ "tg #pwr", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
+static struct gpiod_lookup_table tosa_lcd_bl_gpio_table = {
+ .dev_id = "i2c-tosa-bl",
+ .table = {
+ GPIO_LOOKUP("tc6393xb",
+ TOSA_GPIO_BL_C20MA - TOSA_TC6393XB_GPIO_BASE,
+ "backlight", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
+
static struct spi_board_info spi_board_info[] __initdata = {
{
.modalias = "tosa-lcd",
@@ -935,6 +955,8 @@ static void __init tosa_init(void)
platform_scoop_config = &tosa_pcmcia_config;
pxa2xx_set_spi_info(2, &pxa_ssp_master_info);
+ gpiod_add_lookup_table(&tosa_lcd_gpio_table);
+ gpiod_add_lookup_table(&tosa_lcd_bl_gpio_table);
spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
clk_add_alias("CLK_CK3P6MI", tc6393xb_device.name, "GPIO11_CLK", NULL);
diff --git a/drivers/video/backlight/tosa_bl.c b/drivers/video/backlight/tosa_bl.c
index 1275e815bd86..cff5e96fd988 100644
--- a/drivers/video/backlight/tosa_bl.c
+++ b/drivers/video/backlight/tosa_bl.c
@@ -18,7 +18,7 @@
#include <asm/mach/sharpsl_param.h>
-#include <mach/tosa.h>
+#include "tosa_bl.h"
#define COMADJ_DEFAULT 97
@@ -28,6 +28,7 @@
struct tosa_bl_data {
struct i2c_client *i2c;
struct backlight_device *bl;
+ struct gpio_desc *gpio;
int comadj;
};
@@ -42,7 +43,7 @@ static void tosa_bl_set_backlight(struct tosa_bl_data *data, int brightness)
i2c_smbus_write_byte_data(data->i2c, DAC_CH2, (u8)(brightness & 0xff));
/* SetBacklightVR */
- gpio_set_value(TOSA_GPIO_BL_C20MA, brightness & 0x100);
+ gpiod_set_value(data->gpio, brightness & 0x100);
tosa_bl_enable(spi, brightness);
}
@@ -87,9 +88,8 @@ static int tosa_bl_probe(struct i2c_client *client,
return -ENOMEM;
data->comadj = sharpsl_param.comadj == -1 ? COMADJ_DEFAULT : sharpsl_param.comadj;
-
- ret = devm_gpio_request_one(&client->dev, TOSA_GPIO_BL_C20MA,
- GPIOF_OUT_INIT_LOW, "backlight");
+ data->gpio = devm_gpiod_get(&client->dev, "backlight", GPIOD_OUT_LOW);
+ ret = PTR_ERR_OR_ZERO(data->gpio);
if (ret) {
dev_dbg(&data->bl->dev, "Unable to request gpio!\n");
return ret;
diff --git a/drivers/video/backlight/tosa_bl.h b/drivers/video/backlight/tosa_bl.h
new file mode 100644
index 000000000000..589e17e6fdb2
--- /dev/null
+++ b/drivers/video/backlight/tosa_bl.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef _TOSA_BL_H
+#define _TOSA_BL_H
+
+struct spi_device;
+extern int tosa_bl_enable(struct spi_device *spi, int enable);
+
+#endif
diff --git a/drivers/video/backlight/tosa_lcd.c b/drivers/video/backlight/tosa_lcd.c
index 29af8e27b6e5..e8ab583e5098 100644
--- a/drivers/video/backlight/tosa_lcd.c
+++ b/drivers/video/backlight/tosa_lcd.c
@@ -19,7 +19,7 @@
#include <asm/mach/sharpsl_param.h>
-#include <mach/tosa.h>
+#include "tosa_bl.h"
#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL)
@@ -28,12 +28,26 @@
#define TG_REG0_UD 0x0004
#define TG_REG0_LR 0x0008
+/*
+ * Timing Generator
+ */
+#define TG_PNLCTL 0x00
+#define TG_TPOSCTL 0x01
+#define TG_DUTYCTL 0x02
+#define TG_GPOSR 0x03
+#define TG_GPODR1 0x04
+#define TG_GPODR2 0x05
+#define TG_PINICTL 0x06
+#define TG_HPOSCTL 0x07
+
+
#define DAC_BASE 0x4e
struct tosa_lcd_data {
struct spi_device *spi;
struct lcd_device *lcd;
struct i2c_client *i2c;
+ struct gpio_desc *gpiod_tg;
int lcd_power;
bool is_vga;
@@ -66,7 +80,7 @@ EXPORT_SYMBOL(tosa_bl_enable);
static void tosa_lcd_tg_init(struct tosa_lcd_data *data)
{
/* TG on */
- gpio_set_value(TOSA_GPIO_TG_ON, 0);
+ gpiod_set_value(data->gpiod_tg, 0);
mdelay(60);
@@ -100,6 +114,7 @@ static void tosa_lcd_tg_on(struct tosa_lcd_data *data)
*/
struct i2c_adapter *adap = i2c_get_adapter(0);
struct i2c_board_info info = {
+ .dev_name = "tosa-bl",
.type = "tosa-bl",
.addr = DAC_BASE,
.platform_data = data->spi,
@@ -121,7 +136,7 @@ static void tosa_lcd_tg_off(struct tosa_lcd_data *data)
mdelay(50);
/* TG Off */
- gpio_set_value(TOSA_GPIO_TG_ON, 1);
+ gpiod_set_value(data->gpiod_tg, 1);
mdelay(100);
}
@@ -191,10 +206,9 @@ static int tosa_lcd_probe(struct spi_device *spi)
data->spi = spi;
spi_set_drvdata(spi, data);
- ret = devm_gpio_request_one(&spi->dev, TOSA_GPIO_TG_ON,
- GPIOF_OUT_INIT_LOW, "tg #pwr");
- if (ret < 0)
- return ret;
+ data->gpiod_tg = devm_gpiod_get(&spi->dev, "tg #pwr", GPIOD_OUT_LOW);
+ if (IS_ERR(data->gpiod_tg))
+ return PTR_ERR(data->gpiod_tg);
mdelay(60);
--
2.20.0