[PATCH v3 7/7] arm64: tegra: enable SMMU for SDHCI and EQOS on T194
From: Krishna Reddy
Date: Fri Oct 18 2019 - 19:31:40 EST
Enable SMMU translations for SDHCI and EQOS transactions on T194.
Signed-off-by: Krishna Reddy <vdumpa@xxxxxxxxxx>
---
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
index 6f81e90..bf8ed7a 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
@@ -3,6 +3,7 @@
#include <dt-bindings/gpio/tegra194-gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mailbox/tegra186-hsp.h>
+#include <dt-bindings/memory/tegra186-mc.h>
#include <dt-bindings/pinctrl/pinctrl-tegra.h>
#include <dt-bindings/power/tegra194-powergate.h>
#include <dt-bindings/reset/tegra194-reset.h>
@@ -51,6 +52,7 @@
clock-names = "master_bus", "slave_bus", "rx", "tx", "ptp_ref";
resets = <&bpmp TEGRA194_RESET_EQOS>;
reset-names = "eqos";
+ iommus = <&smmu TEGRA186_SID_EQOS>;
status = "disabled";
snps,write-requests = <1>;
@@ -413,6 +415,7 @@
clock-names = "sdhci";
resets = <&bpmp TEGRA194_RESET_SDMMC1>;
reset-names = "sdhci";
+ iommus = <&smmu TEGRA186_SID_SDMMC1>;
nvidia,pad-autocal-pull-up-offset-3v3-timeout =
<0x07>;
nvidia,pad-autocal-pull-down-offset-3v3-timeout =
@@ -435,6 +438,7 @@
clock-names = "sdhci";
resets = <&bpmp TEGRA194_RESET_SDMMC3>;
reset-names = "sdhci";
+ iommus = <&smmu TEGRA186_SID_SDMMC3>;
nvidia,pad-autocal-pull-up-offset-1v8 = <0x00>;
nvidia,pad-autocal-pull-down-offset-1v8 = <0x7a>;
nvidia,pad-autocal-pull-up-offset-3v3-timeout = <0x07>;
@@ -462,6 +466,7 @@
<&bpmp TEGRA194_CLK_PLLC4>;
resets = <&bpmp TEGRA194_RESET_SDMMC4>;
reset-names = "sdhci";
+ iommus = <&smmu TEGRA186_SID_SDMMC4>;
nvidia,pad-autocal-pull-up-offset-hs400 = <0x00>;
nvidia,pad-autocal-pull-down-offset-hs400 = <0x00>;
nvidia,pad-autocal-pull-up-offset-1v8-timeout = <0x0a>;
--
2.7.4