[PATCH v2 04/11] mmc: host: omap_hsmmc: add code for special init of wl1251 to get rid of pandora_wl1251_init_card

[H. Nikolaus Schaller]

Pandora_wl1251_init_card was used to do special pdata based
setup of the sdio mmc interface. This does no longer work with
v4.7 and later. A fix requires a device tree based mmc3 setup.

Therefore we move the special setup to omap_hsmmc.c instead
of calling some pdata supplied init_card function.

The new code checks for a DT child node compatible to wl1251
so it will not affect other MMC3 use cases.

Fixes: 81eef6ca9201 ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel")

Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx> # 4.7.0
---
 drivers/mmc/host/omap_hsmmc.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 952fa4063ff8..03ba80bcf319 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1512,6 +1512,27 @@ static void omap_hsmmc_init_card(struct mmc_host *mmc, struct mmc_card *card)
 
 	if (mmc_pdata(host)->init_card)
 		mmc_pdata(host)->init_card(card);
+	else if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) {
+		struct device_node *np = mmc_dev(mmc)->of_node;
+
+		np = of_get_compatible_child(np, "ti,wl1251");
+		if (np) {
+			/*
+			 * We have TI wl1251 attached to MMC3. Pass this information to
+			 * SDIO core because it can't be probed by normal methods.
+			 */
+
+			dev_info(host->dev, "found wl1251\n");
+			card->quirks |= MMC_QUIRK_NONSTD_SDIO;
+			card->cccr.wide_bus = 1;
+			card->cis.vendor = 0x104c;
+			card->cis.device = 0x9066;
+			card->cis.blksize = 512;
+			card->cis.max_dtr = 24000000;
+			card->ocr = 0x80;
+			of_node_put(np);
+		}
+	}
 }
 
 static void omap_hsmmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
-- 
2.19.1