Re: [PATCH 00/10] Add support for more Kontron i.MX6UL/ULL SoMs and boards

[Marco Felsch]

Hi Frieder,

On 19-10-17 08:24, Schrempf Frieder wrote:
> Hi Marco,
> 
> On 17.10.19 10:14, Marco Felsch wrote:
> > Hi Frieder,
> > 
> > On 19-10-16 15:06, Schrempf Frieder wrote:
> >> From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
> >>
> >> In order to support more of the i.MX6UL/ULL-based SoMs and boards by
> >> Kontron Electronics GmbH, we restructure the devicetrees to share common
> >> parts and add new devicetrees for the missing boards.
> >>
> >> Currently there are the following SoM flavors:
> >>    * N6310: SoM with i.MX6UL-2, 256MB RAM, 256MB SPI NAND
> >>    * N6311: SoM with i.MX6UL-2, 512MB RAM, 512MB SPI NAND (new)
> >>    * N6411: SoM with i.MX6ULL, 512MB RAM, 512MB SPI NAND (new)
> >>
> >> Each of the SoMs also features 1MB SPI NOR and an Ethernet PHY. The carrier
> >> board for the evalkit is the same for all SoMs.
> >>
> >> Frieder Schrempf (10):
> >>    ARM: dts: imx6ul-kontron-n6310: Move common SoM nodes to a separate
> >>      file
> >>    ARM: dts: Add support for two more Kontron SoMs N6311 and N6411
> >>    ARM: dts: imx6ul-kontron-n6310-s: Move common nodes to a separate file
> >>    ARM: dts: Add support for two more Kontron evalkit boards 'N6311 S'
> >>      and 'N6411 S'
> >>    ARM: dts: imx6ul-kontron-n6x1x: Add 'chosen' node with 'stdout-path'
> >>    ARM: dts: imx6ul-kontron-n6x1x-s: Specify bus-width for SD card and
> >>      eMMC
> >>    ARM: dts: imx6ul-kontron-n6x1x-s: Add vbus-supply and overcurrent
> >>      polarity to usb nodes
> >>    ARM: dts: imx6ul-kontron-n6x1x-s: Remove an obsolete comment and fix
> >>      indentation
> >>    dt-bindings: arm: fsl: Add more Kontron i.MX6UL/ULL compatibles
> >>    MAINTAINERS: Add an entry for Kontron Electronics ARM board support
> > 
> > Did you send all patches to same To: and Cc:?
> 
> No, I have a script that runs get_maintainer.pl for each patch. So the 
> recipients might differ. I only had Krzysztof and Rob as hard-coded 
> recipients for the whole series.
> 
> Do you think I should change this so each recipient receives the whole 
> series?

I do it that way because sometimes it is better for the reviewer to see
the whole context.

Regards,
  Marco 

> Thanks,
> Frieder
> 
> > 
> > Regards,
> >    Marco
> > 
> >>
> >>   .../devicetree/bindings/arm/fsl.yaml          |  14 +
> >>   MAINTAINERS                                   |   6 +
> >>   arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts  | 405 +----------------
> >>   .../boot/dts/imx6ul-kontron-n6310-som.dtsi    |  95 +---
> >>   arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts  |  16 +
> >>   .../boot/dts/imx6ul-kontron-n6311-som.dtsi    |  40 ++
> >>   arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi | 422 ++++++++++++++++++
> >>   .../dts/imx6ul-kontron-n6x1x-som-common.dtsi  | 129 ++++++
> >>   arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts |  16 +
> >>   .../boot/dts/imx6ull-kontron-n6411-som.dtsi   |  40 ++
> >>   10 files changed, 685 insertions(+), 498 deletions(-)
> >>   create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6311-s.dts
> >>   create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi
> >>   create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
> >>   create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
> >>   create mode 100644 arch/arm/boot/dts/imx6ull-kontron-n6411-s.dts
> >>   create mode 100644 arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi
> >>
> >> -- 
> >> 2.17.1
> >>
> >>
> > 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |