Re: [PATCH 01/10] ARM: dts: imx6ul-kontron-n6310: Move common SoM nodes to a separate file

[Schrempf Frieder]

On 21.10.19 12:28, krzk@xxxxxxxxxx wrote:
> On Wed, Oct 16, 2019 at 03:07:19PM +0000, Schrempf Frieder wrote:
>> From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
>>
>> The Kontron N6311 and N6411 SoMs are very similar to N6310. In
>> preparation to add support for them, we move the common nodes to a
>> separate file imx6ul-kontron-n6x1x-som-common.dtsi.
>>
>> Signed-off-by: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx>
>> ---
>>   .../boot/dts/imx6ul-kontron-n6310-som.dtsi    |  95 +-------------
>>   .../dts/imx6ul-kontron-n6x1x-som-common.dtsi  | 123 ++++++++++++++++++
>>   2 files changed, 124 insertions(+), 94 deletions(-)
>>   create mode 100644 arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
>>
>> diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
>> index a896b2348dd2..47d3ce5d255f 100644
>> --- a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
>> +++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
>> @@ -6,7 +6,7 @@
>>    */
>>   
>>   #include "imx6ul.dtsi"
>> -#include <dt-bindings/gpio/gpio.h>
>> +#include "imx6ul-kontron-n6x1x-som-common.dtsi"
>>   
>>   / {
>>   	model = "Kontron N6310 SOM";
>> @@ -18,49 +18,7 @@
>>   	};
>>   };
>>   
>> -&ecspi2 {
>> -	cs-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
>> -	pinctrl-names = "default";
>> -	pinctrl-0 = <&pinctrl_ecspi2>;
>> -	status = "okay";
>> -
>> -	spi-flash@0 {
>> -		compatible = "mxicy,mx25v8035f", "jedec,spi-nor";
>> -		spi-max-frequency = <50000000>;
>> -		reg = <0>;
>> -	};
>> -};
>> -
>> -&fec1 {
>> -	pinctrl-names = "default";
>> -	pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio>;
>> -	phy-mode = "rmii";
>> -	phy-handle = <&ethphy1>;
>> -	status = "okay";
>> -
>> -	mdio {
>> -		#address-cells = <1>;
>> -		#size-cells = <0>;
>> -
>> -		ethphy1: ethernet-phy@1 {
>> -			reg = <1>;
>> -			micrel,led-mode = <0>;
>> -			clocks = <&clks IMX6UL_CLK_ENET_REF>;
>> -			clock-names = "rmii-ref";
>> -		};
>> -	};
>> -};
>> -
>> -&fec2 {
>> -	phy-mode = "rmii";
>> -	status = "disabled";
>> -};
>> -
>>   &qspi {
>> -	pinctrl-names = "default";
>> -	pinctrl-0 = <&pinctrl_qspi>;
>> -	status = "okay";
>> -
>>   	spi-flash@0 {
> 
> You left qspi and flash partitions here, while adding it later. It is
> not pure move then and some duplicated stuff remains.

Indeed, the spi-flash node is duplicated, as I forgot to remove it from 
the common include file. I will change that.