Re: [PATCH v4 2/3] dwc: PCI: intel: PCIe RC controller driver

From: Dilip Kota
Date: Tue Oct 22 2019 - 05:04:31 EST

Hi Andrew Murray,

On 10/21/2019 9:03 PM, Andrew Murray wrote:
On Mon, Oct 21, 2019 at 02:39:19PM +0800, Dilip Kota wrote:
Add support to PCIe RC controller on Intel Gateway SoCs.
PCIe controller is based of Synopsys DesignWare pci core.

Intel PCIe driver requires Upconfig support, fast training
sequence configuration and link speed change. So adding the
respective helper functions in the pcie DesignWare framework.
It also programs hardware autonomous speed during speed
configuration so defining it in pci_regs.h.

Changes on v4:
Rename the driver naming and description to
"PCIe RC controller on Intel Gateway SoCs".
Use PCIe core register macros defined in pci_regs.h
and remove respective local definitions.
Remove pcie core interrupt handling.
Move pcie link control speed change, upconfig and FTS.
configuration functions to DesignWare framework.
Use of_pci_get_max_link_speed().
Mark dependency on X86 and COMPILE_TEST in Kconfig.
Remove lanes and add n_fts variables in intel_pcie_port structure.
Rename rst_interval variable to rst_intrvl in intel_pcie_port structure.
Remove intel_pcie_mem_iatu() as it is already perfomed in dw_setup_rc()
Move sysfs attributes specific code to separate patch.
Remove redundant error handling.
Reduce LoCs by doing variable initializations while declaration itself.
Add extra line after closing parenthesis.
Move intel_pcie_ep_rst_init() out of get_resources()

changes on v3:
Rename PCIe app logic registers with PCIE_APP prefix.
PCIE_IOP_CTRL configuration is not required. Remove respective code.
Remove wrapper functions for clk enable/disable APIs.
Use platform_get_resource_byname() instead of
devm_platform_ioremap_resource() to be similar with DWC framework.
Rename phy name to "pciephy".
Modify debug message in msi_init() callback to be more specific.
Remove map_irq() callback.
Enable the INTx interrupts at the time of PCIe initialization.
Reduce memory fragmentation by using variable "struct dw_pcie pci"
instead of allocating memory.
Reduce the delay to 100us during enpoint initialization
intel_pcie_ep_rst_init().
Call dw_pcie_host_deinit() during remove() instead of directly
calling PCIe core APIs.
Rename "intel,rst-interval" to "reset-assert-ms".
Remove unused APP logic Interrupt bit macro definitions.
Use dwc framework's dw_pcie_setup_rc() for PCIe host specific
configuration instead of redefining the same functionality in
the driver.
Move the whole DT parsing specific code to intel_pcie_get_resources()

Signed-off-by: Dilip Kota <eswara.kota@xxxxxxxxxxxxxxx>
---
drivers/pci/controller/dwc/Kconfig | 10 +
drivers/pci/controller/dwc/Makefile | 1 +
drivers/pci/controller/dwc/pcie-designware.c | 34 ++
drivers/pci/controller/dwc/pcie-designware.h | 12 +
drivers/pci/controller/dwc/pcie-intel-gw.c | 590 +++++++++++++++++++++++++++
include/uapi/linux/pci_regs.h | 1 +
6 files changed, 648 insertions(+)
create mode 100644 drivers/pci/controller/dwc/pcie-intel-gw.c

diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
index 0ba988b5b5bc..b33ed1cc873d 100644
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
@@ -82,6 +82,16 @@ config PCIE_DW_PLAT_EP
order to enable device-specific features PCI_DW_PLAT_EP must be
selected.
+config PCIE_INTEL_GW
+ bool "Intel Gateway PCIe host controller support"
+ depends on OF && (X86 || COMPILE_TEST)
+ select PCIE_DW_HOST
+ help
+ Say 'Y' here to enable support for PCIe Host controller driver.
This sentence is very generic, we don't even say what controller driver.

+ The PCIe controller on Intel Gateway SoCs is based on the Synopsys
+ DesignWare pcie core and therefore uses the DesignWare core
+ functions for the driver implementation.
Thanks for changing the driver name, though the description hasn't really
changed since the last revision. In particular, Christoph's feedback mentioned
that it would be useful to describe where this IP block may be used - is there
any reason why we can't make this more useful for users?
I will add more information.

+
config PCI_EXYNOS
bool "Samsung Exynos PCIe controller"
depends on SOC_EXYNOS5440 || COMPILE_TEST
diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
index b30336181d46..99db83cd2f35 100644
--- a/drivers/pci/controller/dwc/Makefile
+++ b/drivers/pci/controller/dwc/Makefile
@@ -3,6 +3,7 @@ obj-$(CONFIG_PCIE_DW) += pcie-designware.o
obj-$(CONFIG_PCIE_DW_HOST) += pcie-designware-host.o
obj-$(CONFIG_PCIE_DW_EP) += pcie-designware-ep.o
obj-$(CONFIG_PCIE_DW_PLAT) += pcie-designware-plat.o
+obj-$(CONFIG_PCIE_INTEL_GW) += pcie-intel-gw.o
obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index 820488dfeaed..4c391bfd681a 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -474,6 +474,40 @@ int dw_pcie_link_up(struct dw_pcie *pci)
(!(val & PCIE_PORT_DEBUG1_LINK_IN_TRAINING)));
}
+
+void dw_pcie_upconfig_setup(struct dw_pcie *pci)
+{
+ u32 val;
+
+ val = dw_pcie_readl_dbi(pci, PCIE_PORT_MULTI_LANE_CTRL);
+ dw_pcie_writel_dbi(pci, PCIE_PORT_MULTI_LANE_CTRL,
+ val | PORT_MLTI_UPCFG_SUPPORT);
+}
+
+void dw_pcie_link_speed_change(struct dw_pcie *pci, bool enable)
+{
+ u32 val;
+
+ val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
+
+ if (enable)
+ val |= PORT_LOGIC_SPEED_CHANGE;
+ else
+ val &= ~PORT_LOGIC_SPEED_CHANGE;
+
+ dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
+}
It's always great to see code move from specific drivers to parent drivers
as it helps reduce duplication of code.

Though I notice that imx6_pcie_establish_link (pci-imx6.c) and
dw_pcie_setup_rc (pcie-designware-host.c) also does this. Rather than have
duplicated code, I think it makes sense to adopt those users to this new
code.

In any case, the above function isn't used here. Can you add it in any
patch that does use it please?
In the earlier patch version this function is being called in intel_pcie_rc_setup().
After noticing this operation is being performed in dw_pcie_setup_rc(), i removed the dw_pcie_link_speed_change() function call, but missed to move the function definition to sysfs attribute patch as it is not being called here.

I will move it to the sysfs attribute patch.
Thanks for pointing it.

+
+void dw_pcie_link_set_n_fts(struct dw_pcie *pci, u32 n_fts)
+{
+ u32 val;
+
+ val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
+ val &= ~PORT_LOGIC_N_FTS;
+ val |= n_fts;
+ dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
+}
I notice that pcie-artpec6.c (artpec6_pcie_set_nfts) also writes the FTS
and defines a bunch of macros to support this. It doesn't make sense to
duplicate this there. Therefore I think we need to update pcie-artpec6.c
to use this new function.
I think we can do in a separate patch after these changes get merged and keep this patch series for intel PCIe driver and required changes in PCIe DesignWare framework.

+
static u8 dw_pcie_iatu_unroll_enabled(struct dw_pcie *pci)
{
u32 val;
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 5a18e94e52c8..3beac10e4a4c 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -30,7 +30,12 @@
#define LINK_WAIT_IATU 9
/* Synopsys-specific PCIe configuration registers */
+#define PCIE_PORT_AFR 0x70C
+#define PORT_AFR_N_FTS_MASK GENMASK(15, 8)
+#define PORT_AFR_CC_N_FTS_MASK GENMASK(23, 16)
+
#define PCIE_PORT_LINK_CONTROL 0x710
+#define PORT_LINK_DLL_LINK_EN BIT(5)
#define PORT_LINK_MODE_MASK GENMASK(21, 16)
#define PORT_LINK_MODE(n) FIELD_PREP(PORT_LINK_MODE_MASK, n)
#define PORT_LINK_MODE_1_LANES PORT_LINK_MODE(0x1)
@@ -46,6 +51,7 @@
#define PCIE_PORT_DEBUG1_LINK_IN_TRAINING BIT(29)
#define PCIE_LINK_WIDTH_SPEED_CONTROL 0x80C
+#define PORT_LOGIC_N_FTS GENMASK(7, 0)
#define PORT_LOGIC_SPEED_CHANGE BIT(17)
#define PORT_LOGIC_LINK_WIDTH_MASK GENMASK(12, 8)
#define PORT_LOGIC_LINK_WIDTH(n) FIELD_PREP(PORT_LOGIC_LINK_WIDTH_MASK, n)
@@ -60,6 +66,9 @@
#define PCIE_MSI_INTR0_MASK 0x82C
#define PCIE_MSI_INTR0_STATUS 0x830
+#define PCIE_PORT_MULTI_LANE_CTRL 0x8C0
+#define PORT_MLTI_UPCFG_SUPPORT BIT(7)
+
#define PCIE_ATU_VIEWPORT 0x900
#define PCIE_ATU_REGION_INBOUND BIT(31)
#define PCIE_ATU_REGION_OUTBOUND 0
@@ -273,6 +282,9 @@ void dw_pcie_write_dbi2(struct dw_pcie *pci, u32 reg, size_t size, u32 val);
u32 dw_pcie_read_atu(struct dw_pcie *pci, u32 reg, size_t size);
void dw_pcie_write_atu(struct dw_pcie *pci, u32 reg, size_t size, u32 val);
int dw_pcie_link_up(struct dw_pcie *pci);
+void dw_pcie_upconfig_setup(struct dw_pcie *pci);
+void dw_pcie_link_speed_change(struct dw_pcie *pci, bool enable);
+void dw_pcie_link_set_n_fts(struct dw_pcie *pci, u32 n_fts);
int dw_pcie_wait_for_link(struct dw_pcie *pci);
void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index,
int type, u64 cpu_addr, u64 pci_addr,
diff --git a/drivers/pci/controller/dwc/pcie-intel-gw.c b/drivers/pci/controller/dwc/pcie-intel-gw.c
new file mode 100644
index 000000000000..9142c70db808
--- /dev/null
+++ b/drivers/pci/controller/dwc/pcie-intel-gw.c
@@ -0,0 +1,590 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCIe host controller driver for Intel Gateway SoCs
+ *
+ * Copyright (c) 2019 Intel Corporation.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/iopoll.h>
+#include <linux/of_irq.h>
+#include <linux/of_pci.h>
+#include <linux/of_platform.h>
+#include <linux/pci_regs.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+#include "../../pci.h"
I expected this to be removed, is it needed now?

In the earlier patch you suggested to use "of_pci_get_max_link_speed()" instead of device_get_*.
And, pci.h is required for it.


+#include "pcie-designware.h"
+
+#define PCIE_CAP_OFST 0x70
+
+#define PORT_AFR_N_FTS_GEN12_DFT (SZ_128 - 1)
+#define PORT_AFR_N_FTS_GEN3 180
+#define PORT_AFR_N_FTS_GEN4 196
+
+/* PCIe Application logic Registers */
+#define PCIE_APP_CCR 0x10
+#define PCIE_APP_CCR_LTSSM_ENABLE BIT(0)
+
+#define PCIE_APP_MSG_CR 0x30
+#define PCIE_APP_MSG_XMT_PM_TURNOFF BIT(0)
+
+#define PCIE_APP_PMC 0x44
+#define PCIE_APP_PMC_IN_L2 BIT(20)
+
+#define PCIE_APP_IRNEN 0xF4
+#define PCIE_APP_IRNCR 0xF8
+#define PCIE_APP_IRN_AER_REPORT BIT(0)
+#define PCIE_APP_IRN_PME BIT(2)
+#define PCIE_APP_IRN_RX_VDM_MSG BIT(4)
+#define PCIE_APP_IRN_PM_TO_ACK BIT(9)
+#define PCIE_APP_IRN_LINK_AUTO_BW_STAT BIT(11)
+#define PCIE_APP_IRN_BW_MGT BIT(12)
+#define PCIE_APP_IRN_MSG_LTR BIT(18)
+#define PCIE_APP_IRN_SYS_ERR_RC BIT(29)
+#define PCIE_APP_INTX_OFST 12
+
+#define PCIE_APP_IRN_INT \
+ (PCIE_APP_IRN_AER_REPORT | PCIE_APP_IRN_PME | \
+ PCIE_APP_IRN_RX_VDM_MSG | PCIE_APP_IRN_SYS_ERR_RC | \
+ PCIE_APP_IRN_PM_TO_ACK | PCIE_APP_IRN_MSG_LTR | \
+ PCIE_APP_IRN_BW_MGT | PCIE_APP_IRN_LINK_AUTO_BW_STAT | \
+ (PCIE_APP_INTX_OFST + PCI_INTERRUPT_INTA) | \
+ (PCIE_APP_INTX_OFST + PCI_INTERRUPT_INTB) | \
+ (PCIE_APP_INTX_OFST + PCI_INTERRUPT_INTC) | \
+ (PCIE_APP_INTX_OFST + PCI_INTERRUPT_INTD))
+
+#define BUS_IATU_OFFS SZ_256M
+#define RST_INTRVL_DFT_MS 100
+
+enum {
+ PCIE_LINK_SPEED_AUTO = 0,
+ PCIE_LINK_SPEED_GEN1,
+ PCIE_LINK_SPEED_GEN2,
+ PCIE_LINK_SPEED_GEN3,
+ PCIE_LINK_SPEED_GEN4,
+};
+
+struct intel_pcie_soc {
+ unsigned int pcie_ver;
+ unsigned int pcie_atu_offset;
+ u32 num_viewport;
+};
+
+struct intel_pcie_port {
+ struct dw_pcie pci;
+ unsigned int id; /* Physical RC Index */
+ void __iomem *app_base;
+ struct gpio_desc *reset_gpio;
+ u32 rst_intrvl;
+ u32 max_speed;
+ u32 link_gen;
+ u32 max_width;
+ u32 n_fts;
+ struct clk *core_clk;
+ struct reset_control *core_rst;
+ struct phy *phy;
+};
+
+static void pcie_update_bits(void __iomem *base, u32 mask, u32 val, u32 ofs)
+{
+ u32 orig, tmp;
+
+ orig = readl(base + ofs);
+
+ tmp = (orig & ~mask) | (val & mask);
+
+ if (tmp != orig)
+ writel(tmp, base + ofs);
+}
+
+static inline u32 pcie_app_rd(struct intel_pcie_port *lpp, u32 ofs)
+{
+ return readl(lpp->app_base + ofs);
+}
+
+static inline void pcie_app_wr(struct intel_pcie_port *lpp, u32 val, u32 ofs)
+{
+ writel(val, lpp->app_base + ofs);
+}
+
+static void pcie_app_wr_mask(struct intel_pcie_port *lpp,
+ u32 mask, u32 val, u32 ofs)
+{
+ pcie_update_bits(lpp->app_base, mask, val, ofs);
+}
+
+static inline u32 pcie_rc_cfg_rd(struct intel_pcie_port *lpp, u32 ofs)
+{
+ return dw_pcie_readl_dbi(&lpp->pci, ofs);
+}
+
+static inline void pcie_rc_cfg_wr(struct intel_pcie_port *lpp, u32 val, u32 ofs)
+{
+ dw_pcie_writel_dbi(&lpp->pci, ofs, val);
+}
+
+static void pcie_rc_cfg_wr_mask(struct intel_pcie_port *lpp,
+ u32 mask, u32 val, u32 ofs)
+{
+ pcie_update_bits(lpp->pci.dbi_base, mask, val, ofs);
+}
+
+static void intel_pcie_ltssm_enable(struct intel_pcie_port *lpp)
+{
+ pcie_app_wr_mask(lpp, PCIE_APP_CCR_LTSSM_ENABLE,
+ PCIE_APP_CCR_LTSSM_ENABLE, PCIE_APP_CCR);
+}
+
+static void intel_pcie_ltssm_disable(struct intel_pcie_port *lpp)
+{
+ pcie_app_wr_mask(lpp, PCIE_APP_CCR_LTSSM_ENABLE, 0, PCIE_APP_CCR);
+}
+
+static void intel_pcie_link_setup(struct intel_pcie_port *lpp)
+{
+ u32 val;
+
+ val = pcie_rc_cfg_rd(lpp, PCIE_CAP_OFST + PCI_EXP_LNKCAP);
+ lpp->max_speed = FIELD_GET(PCI_EXP_LNKCAP_SLS, val);
+ lpp->max_width = FIELD_GET(PCI_EXP_LNKCAP_MLW, val);
+
+ val = pcie_rc_cfg_rd(lpp, PCIE_CAP_OFST + PCI_EXP_LNKCTL);
+
+ val &= ~(PCI_EXP_LNKCTL_LD | PCI_EXP_LNKCTL_ASPMC);
+ val |= (PCI_EXP_LNKSTA_SLC << 16) | PCI_EXP_LNKCTL_CCC |
+ PCI_EXP_LNKCTL_RCB;
+ pcie_rc_cfg_wr(lpp, val, PCIE_CAP_OFST + PCI_EXP_LNKCTL);
+}
+
+static void intel_pcie_max_speed_setup(struct intel_pcie_port *lpp)
+{
+ u32 reg, val;
+
+ reg = pcie_rc_cfg_rd(lpp, PCIE_CAP_OFST + PCI_EXP_LNKCTL2);
+ switch (lpp->link_gen) {
+ case PCIE_LINK_SPEED_GEN1:
+ reg &= ~PCI_EXP_LNKCTL2_TLS;
+ reg |= PCI_EXP_LNKCTL2_HASD|
+ PCI_EXP_LNKCTL2_TLS_2_5GT;
+ break;
+ case PCIE_LINK_SPEED_GEN2:
+ reg &= ~PCI_EXP_LNKCTL2_TLS;
+ reg |= PCI_EXP_LNKCTL2_HASD|
+ PCI_EXP_LNKCTL2_TLS_5_0GT;
+ break;
+ case PCIE_LINK_SPEED_GEN3:
+ reg &= ~PCI_EXP_LNKCTL2_TLS;
+ reg |= PCI_EXP_LNKCTL2_HASD|
+ PCI_EXP_LNKCTL2_TLS_8_0GT;
+ break;
+ case PCIE_LINK_SPEED_GEN4:
+ reg &= ~PCI_EXP_LNKCTL2_TLS;
+ reg |= PCI_EXP_LNKCTL2_HASD|
+ PCI_EXP_LNKCTL2_TLS_16_0GT;
+ break;
+ default:
+ /* Use hardware capability */
+ val = pcie_rc_cfg_rd(lpp, PCIE_CAP_OFST + PCI_EXP_LNKCAP);
+ val = FIELD_GET(PCI_EXP_LNKCAP_SLS, val);
+ reg &= ~PCI_EXP_LNKCTL2_HASD;
+ reg |= val;
+ break;
+ }
+
+ pcie_rc_cfg_wr(lpp, reg, PCIE_CAP_OFST + PCI_EXP_LNKCTL2);
+ dw_pcie_link_set_n_fts(&lpp->pci, lpp->n_fts);
+}
+
+
+
Lots of space here isn't needed.
i will remove it.

+static void intel_pcie_port_logic_setup(struct intel_pcie_port *lpp)
+{
+ u32 val, mask;
+
+ switch (lpp->max_speed) {
+ case PCIE_LINK_SPEED_GEN3:
+ lpp->n_fts = PORT_AFR_N_FTS_GEN3;
+ break;
+ case PCIE_LINK_SPEED_GEN4:
+ lpp->n_fts = PORT_AFR_N_FTS_GEN4;
+ break;
+ default:
+ lpp->n_fts = PORT_AFR_N_FTS_GEN12_DFT;
+ break;
+ }
+
+ mask = PORT_AFR_N_FTS_MASK | PORT_AFR_CC_N_FTS_MASK;
+ val = FIELD_PREP(PORT_AFR_N_FTS_MASK, lpp->n_fts) |
+ FIELD_PREP(PORT_AFR_CC_N_FTS_MASK, lpp->n_fts);
+ pcie_rc_cfg_wr_mask(lpp, mask, val, PCIE_PORT_AFR);
+
+ /* Port Link Control Register */
+ pcie_rc_cfg_wr_mask(lpp, PORT_LINK_DLL_LINK_EN,
+ PORT_LINK_DLL_LINK_EN, PCIE_PORT_LINK_CONTROL);
+}
+
+static void intel_pcie_rc_setup(struct intel_pcie_port *lpp)
+{
+ intel_pcie_ltssm_disable(lpp);
+ intel_pcie_link_setup(lpp);
+ dw_pcie_setup_rc(&lpp->pci.pp);
+ dw_pcie_upconfig_setup(&lpp->pci);
+ intel_pcie_port_logic_setup(lpp);
+ intel_pcie_max_speed_setup(lpp);
+}
+
+static int intel_pcie_ep_rst_init(struct intel_pcie_port *lpp)
+{
+ struct device *dev = lpp->pci.dev;
+ int ret;
+
+ lpp->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(lpp->reset_gpio)) {
+ ret = PTR_ERR(lpp->reset_gpio);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "failed to request PCIe GPIO: %d\n", ret);
+ return ret;
+ }
+
+ /* Make initial reset last for 100us */
+ usleep_range(100, 200);
+
+ return 0;
+}
+
+static void intel_pcie_core_rst_assert(struct intel_pcie_port *lpp)
+{
+ reset_control_assert(lpp->core_rst);
+}
+
+static void intel_pcie_core_rst_deassert(struct intel_pcie_port *lpp)
+{
+ /*
+ * One micro-second delay to make sure the reset pulse
+ * wide enough so that core reset is clean.
+ */
+ udelay(1);
+ reset_control_deassert(lpp->core_rst);
+
+ /*
+ * Some SoC core reset also reset PHY, more delay needed
+ * to make sure the reset process is done.
+ */
+ usleep_range(1000, 2000);
+}
+
+static void intel_pcie_device_rst_assert(struct intel_pcie_port *lpp)
+{
+ gpiod_set_value_cansleep(lpp->reset_gpio, 1);
+}
+
+static void intel_pcie_device_rst_deassert(struct intel_pcie_port *lpp)
+{
+ msleep(lpp->rst_intrvl);
+ gpiod_set_value_cansleep(lpp->reset_gpio, 0);
+}
+
+static int intel_pcie_app_logic_setup(struct intel_pcie_port *lpp)
+{
+ intel_pcie_device_rst_deassert(lpp);
+ intel_pcie_ltssm_enable(lpp);
+
+ return dw_pcie_wait_for_link(&lpp->pci);
+}
+
+static void intel_pcie_core_irq_disable(struct intel_pcie_port *lpp)
+{
+ pcie_app_wr(lpp, 0, PCIE_APP_IRNEN);
+ pcie_app_wr(lpp, PCIE_APP_IRN_INT, PCIE_APP_IRNCR);
+}
+
+static int intel_pcie_get_resources(struct platform_device *pdev)
+{
+ struct intel_pcie_port *lpp = platform_get_drvdata(pdev);
+ struct dw_pcie *pci = &lpp->pci;
+ struct device *dev = pci->dev;
+ struct resource *res;
+ int ret;
+
+ ret = device_property_read_u32(dev, "linux,pci-domain", &lpp->id);
+ if (ret) {
+ dev_err(dev, "failed to get domain id, errno %d\n", ret);
+ return ret;
+ }
Why is this a required property?
I marked it required property because lpp->id is being used during debug prints.
 -> sprintf(buf, "Port %2u Width x%u Speed %s GT/s\n", lpp->id,
Â-> dev_info(dev, "Intel PCIe Root Complex Port %d init done\n", lpp->id);

Hmmm.. I found, domain id can be traversed from pci_host_bridge structure after dw_pcie_host_init().
I will remove the code for getting the pci-domain here.


+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");
+
+ pci->dbi_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(pci->dbi_base))
+ return PTR_ERR(pci->dbi_base);
+
+ lpp->core_clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(lpp->core_clk)) {
+ ret = PTR_ERR(lpp->core_clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "failed to get clks: %d\n", ret);
+ return ret;
+ }
+
+ lpp->core_rst = devm_reset_control_get(dev, NULL);
+ if (IS_ERR(lpp->core_rst)) {
+ ret = PTR_ERR(lpp->core_rst);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "failed to get resets: %d\n", ret);
+ return ret;
+ }
+
+ ret = device_property_match_string(dev, "device_type", "pci");
+ if (ret) {
+ dev_err(dev, "failed to find pci device type: %d\n", ret);
+ return ret;
+ }
+
+ if (device_property_read_u32(dev, "reset-assert-ms", &lpp->rst_intrvl))
+ lpp->rst_intrvl = RST_INTRVL_DFT_MS;
+
+ ret = of_pci_get_max_link_speed(dev->of_node);
+ lpp->link_gen = ret < 0 ? 0 : ret;
I think the spacing may be a little off above.
Yes, typo error. I will correct it.

+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "app");
+
+ lpp->app_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(lpp->app_base))
+ return PTR_ERR(lpp->app_base);
+
+ lpp->phy = devm_phy_get(dev, "pcie");
+ if (IS_ERR(lpp->phy)) {
+ ret = PTR_ERR(lpp->phy);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "couldn't get pcie-phy: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static void intel_pcie_deinit_phy(struct intel_pcie_port *lpp)
+{
+ phy_exit(lpp->phy);
+}
+
+static int intel_pcie_wait_l2(struct intel_pcie_port *lpp)
+{
+ u32 value;
+ int ret;
+
+ if (lpp->max_speed < PCIE_LINK_SPEED_GEN3)
+ return 0;
+
+ /* Send PME_TURN_OFF message */
+ pcie_app_wr_mask(lpp, PCIE_APP_MSG_XMT_PM_TURNOFF,
+ PCIE_APP_MSG_XMT_PM_TURNOFF, PCIE_APP_MSG_CR);
+
+ /* Read PMC status and wait for falling into L2 link state */
+ ret = readl_poll_timeout(lpp->app_base + PCIE_APP_PMC, value,
+ (value & PCIE_APP_PMC_IN_L2), 20,
+ jiffies_to_usecs(5 * HZ));
+ if (ret)
+ dev_err(lpp->pci.dev, "PCIe link enter L2 timeout!\n");
+
+ return ret;
+}
+
+static void intel_pcie_turn_off(struct intel_pcie_port *lpp)
+{
+ if (dw_pcie_link_up(&lpp->pci))
+ intel_pcie_wait_l2(lpp);
+
+ /* Put endpoint device in reset state */
+ intel_pcie_device_rst_assert(lpp);
+ pcie_rc_cfg_wr_mask(lpp, PCI_COMMAND_MEMORY, 0, PCI_COMMAND);
+}
+
+static int intel_pcie_host_setup(struct intel_pcie_port *lpp)
+{
+ int ret;
+
+ intel_pcie_core_rst_assert(lpp);
+ intel_pcie_device_rst_assert(lpp);
+
+ ret = phy_init(lpp->phy);
+ if (ret)
+ return ret;
+
+ intel_pcie_core_rst_deassert(lpp);
+
+ ret = clk_prepare_enable(lpp->core_clk);
+ if (ret) {
+ dev_err(lpp->pci.dev, "Core clock enable failed: %d\n", ret);
+ goto clk_err;
+ }
+
+ intel_pcie_rc_setup(lpp);
+ ret = intel_pcie_app_logic_setup(lpp);
+ if (ret)
+ goto app_init_err;
+
+ /* Enable integrated interrupts */
+ pcie_app_wr_mask(lpp, PCIE_APP_IRN_INT, PCIE_APP_IRN_INT,
+ PCIE_APP_IRNEN);
+ return 0;
+
+app_init_err:
+ clk_disable_unprepare(lpp->core_clk);
+clk_err:
+ intel_pcie_core_rst_assert(lpp);
+ intel_pcie_deinit_phy(lpp);
+
+ return ret;
+}
+
+static void __intel_pcie_remove(struct intel_pcie_port *lpp)
+{
+ intel_pcie_core_irq_disable(lpp);
+ intel_pcie_turn_off(lpp);
+ clk_disable_unprepare(lpp->core_clk);
+ intel_pcie_core_rst_assert(lpp);
+ intel_pcie_deinit_phy(lpp);
+}
+
+static int intel_pcie_remove(struct platform_device *pdev)
+{
+ struct intel_pcie_port *lpp = platform_get_drvdata(pdev);
+ struct pcie_port *pp = &lpp->pci.pp;
+
+ dw_pcie_host_deinit(pp);
+ __intel_pcie_remove(lpp);
+
+ return 0;
+}
+
+static int __maybe_unused intel_pcie_suspend_noirq(struct device *dev)
+{
+ struct intel_pcie_port *lpp = dev_get_drvdata(dev);
+ int ret;
+
+ intel_pcie_core_irq_disable(lpp);
+ ret = intel_pcie_wait_l2(lpp);
+ if (ret)
+ return ret;
+
+ intel_pcie_deinit_phy(lpp);
+ clk_disable_unprepare(lpp->core_clk);
+ return ret;
+}
+
+static int __maybe_unused intel_pcie_resume_noirq(struct device *dev)
+{
+ struct intel_pcie_port *lpp = dev_get_drvdata(dev);
+
+ return intel_pcie_host_setup(lpp);
+}
+
+static int intel_pcie_rc_init(struct pcie_port *pp)
+{
+ struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+ struct intel_pcie_port *lpp = dev_get_drvdata(pci->dev);
+
+ return intel_pcie_host_setup(lpp);
+}
+
+int intel_pcie_msi_init(struct pcie_port *pp)
+{
+ /* PCIe MSI/MSIx is handled by MSI in x86 processor */
+ return 0;
+}
+
+u64 intel_pcie_cpu_addr(struct dw_pcie *pcie, u64 cpu_addr)
+{
+ return cpu_addr + BUS_IATU_OFFS;
+}
+
+static const struct dw_pcie_ops intel_pcie_ops = {
+ .cpu_addr_fixup = intel_pcie_cpu_addr,
+};
+
+static const struct dw_pcie_host_ops intel_pcie_dw_ops = {
+ .host_init = intel_pcie_rc_init,
+ .msi_host_init = intel_pcie_msi_init,
+};
+
+static const struct intel_pcie_soc pcie_data = {
+ .pcie_ver = 0x520A,
+ .pcie_atu_offset = 0xC0000,
+ .num_viewport = 3,
+};
+
+static int intel_pcie_probe(struct platform_device *pdev)
+{
+ const struct intel_pcie_soc *data;
+ struct device *dev = &pdev->dev;
+ struct intel_pcie_port *lpp;
+ struct pcie_port *pp;
+ struct dw_pcie *pci;
+ int ret;
+
+ lpp = devm_kzalloc(dev, sizeof(*lpp), GFP_KERNEL);
+ if (!lpp)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, lpp);
+ pci = &lpp->pci;
+ pci->dev = dev;
+ pp = &pci->pp;
+
+ ret = intel_pcie_get_resources(pdev);
+ if (ret)
+ return ret;
+
+ ret = intel_pcie_ep_rst_init(lpp);
+ if (ret)
+ return ret;
+
+ data = device_get_match_data(dev);
+ pci->ops = &intel_pcie_ops;
+ pci->version = data->pcie_ver;
+ pci->atu_base = pci->dbi_base + data->pcie_atu_offset;
+ pp->ops = &intel_pcie_dw_ops;
+
+ ret = dw_pcie_host_init(pp);
+ if (ret) {
+ dev_err(dev, "cannot initialize host\n");
+ return ret;
+ }
+
+ /* Intel PCIe doesn't configure IO region, so configure
+ * viewport to not to access IO region during register
+ * read write operations.
+ */
+ pci->num_viewport = data->num_viewport;
+ dev_info(dev, "Intel PCIe Root Complex Port %d init done\n", lpp->id);
+
+ return ret;
+}
+
+static const struct dev_pm_ops intel_pcie_pm_ops = {
+ SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(intel_pcie_suspend_noirq,
+ intel_pcie_resume_noirq)
+};
+
+static const struct of_device_id of_intel_pcie_match[] = {
+ { .compatible = "intel,lgm-pcie", .data = &pcie_data },
+ {}
+};
+
+static struct platform_driver intel_pcie_driver = {
+ .probe = intel_pcie_probe,
+ .remove = intel_pcie_remove,
+ .driver = {
+ .name = "intel-gw-pcie",
+ .of_match_table = of_intel_pcie_match,
+ .pm = &intel_pcie_pm_ops,
+ },
+};
+builtin_platform_driver(intel_pcie_driver);
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index 29d6e93fd15e..f6e7e402f879 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -673,6 +673,7 @@
#define PCI_EXP_LNKCTL2_TLS_8_0GT 0x0003 /* Supported Speed 8GT/s */
#define PCI_EXP_LNKCTL2_TLS_16_0GT 0x0004 /* Supported Speed 16GT/s */
#define PCI_EXP_LNKCTL2_TLS_32_0GT 0x0005 /* Supported Speed 32GT/s */
+#define PCI_EXP_LNKCTL2_HASD 0x0200 /* Hw Autonomous Speed Disable */
I think this should be 0x0020.
Yes, my miss, i will update.
Thanks for pointing it.

Thanks for reviewing and providing the inputs.
Regards,
Dilip

Thanks,

Andrew Murray

#define PCI_EXP_LNKSTA2 50 /* Link Status 2 */
#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 52 /* v2 endpoints with link end here */
#define PCI_EXP_SLTCAP2 52 /* Slot Capabilities 2 */
--
2.11.0