[PATCH v1 1/2] scsi: ufs: Introduce a vops for resetting host controller
From: Can Guo
Date: Wed Oct 23 2019 - 00:13:58 EST
Some UFS host controllers need their specific implementations of resetting
to get them into a good state. Provide a new vops to allow the platform
driver to implement this own reset operation.
Signed-off-by: Can Guo <cang@xxxxxxxxxxxxxx>
---
drivers/scsi/ufs/ufshcd.c | 16 ++++++++++++++++
drivers/scsi/ufs/ufshcd.h | 10 ++++++++++
2 files changed, 26 insertions(+)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index c28c144..161e3c4 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -3859,6 +3859,14 @@ static int ufshcd_link_recovery(struct ufs_hba *hba)
ufshcd_set_eh_in_progress(hba);
spin_unlock_irqrestore(hba->host->host_lock, flags);
+ ret = ufshcd_vops_full_reset(hba);
+ if (ret)
+ dev_warn(hba->dev, "%s: full reset returned %d\n",
+ __func__, ret);
+
+ /* Reset the attached device */
+ ufshcd_vops_device_reset(hba);
+
ret = ufshcd_host_reset_and_restore(hba);
spin_lock_irqsave(hba->host->host_lock, flags);
@@ -6241,6 +6249,11 @@ static int ufshcd_reset_and_restore(struct ufs_hba *hba)
int retries = MAX_HOST_RESET_RETRIES;
do {
+ err = ufshcd_vops_full_reset(hba);
+ if (err)
+ dev_warn(hba->dev, "%s: full reset returned %d\n",
+ __func__, err);
+
/* Reset the attached device */
ufshcd_vops_device_reset(hba);
@@ -8384,6 +8397,9 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
goto exit_gating;
}
+ /* Reset controller to power on reset (POR) state */
+ ufshcd_vops_full_reset(hba);
+
/* Reset the attached device */
ufshcd_vops_device_reset(hba);
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index e0fe247..253b9ea 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -296,6 +296,8 @@ struct ufs_pwr_mode_info {
* @apply_dev_quirks: called to apply device specific quirks
* @suspend: called during host controller PM callback
* @resume: called during host controller PM callback
+ * @full_reset: called for handling variant specific implementations of
+ * resetting the hci
* @dbg_register_dump: used to dump controller debug information
* @phy_initialization: used to initialize phys
* @device_reset: called to issue a reset pulse on the UFS device
@@ -325,6 +327,7 @@ struct ufs_hba_variant_ops {
int (*apply_dev_quirks)(struct ufs_hba *);
int (*suspend)(struct ufs_hba *, enum ufs_pm_op);
int (*resume)(struct ufs_hba *, enum ufs_pm_op);
+ int (*full_reset)(struct ufs_hba *hba);
void (*dbg_register_dump)(struct ufs_hba *hba);
int (*phy_initialization)(struct ufs_hba *);
void (*device_reset)(struct ufs_hba *hba);
@@ -1076,6 +1079,13 @@ static inline int ufshcd_vops_resume(struct ufs_hba *hba, enum ufs_pm_op op)
return 0;
}
+static inline int ufshcd_vops_full_reset(struct ufs_hba *hba)
+{
+ if (hba->vops && hba->vops->full_reset)
+ return hba->vops->full_reset(hba);
+ return 0;
+}
+
static inline void ufshcd_vops_dbg_register_dump(struct ufs_hba *hba)
{
if (hba->vops && hba->vops->dbg_register_dump)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project