[PATCH v2] clk: qcom: gcc: Add missing clocks in SM8150

From: Vinod Koul
Date: Thu Oct 24 2019 - 10:14:12 EST

Next message: Marco Elver: "Re: [PATCH v2 4/8] seqlock, kcsan: Add annotations for KCSAN"
Previous message: Gregory CLEMENT: "[PATCH] spi: Fix NULL pointer when setting SPI_CS_HIGH for GPIO CS"
Next in thread: Stephen Boyd: "Re: [PATCH v2] clk: qcom: gcc: Add missing clocks in SM8150"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

The initial upstreaming of SM8150 GCC driver missed few clock so add
them up now.

Signed-off-by: Vinod Koul <vkoul@xxxxxxxxxx>
---
Changes in v2:
- rebase on 5.4-rc1
- add comments for BRANCH_HALT_SKIP

drivers/clk/qcom/gcc-sm8150.c | 184 ++++++++++++++++++++++++++++++++++
1 file changed, 184 insertions(+)

diff --git a/drivers/clk/qcom/gcc-sm8150.c b/drivers/clk/qcom/gcc-sm8150.c
index 20877214acff..0334b2be5fca 100644
--- a/drivers/clk/qcom/gcc-sm8150.c
+++ b/drivers/clk/qcom/gcc-sm8150.c
@@ -1616,6 +1616,40 @@ static struct clk_branch gcc_gpu_cfg_ahb_clk = {
},
};

+/* external clocks so add BRANCH_HALT_SKIP */
+static struct clk_branch gcc_gpu_gpll0_clk_src = {
+ .halt_check = BRANCH_HALT_SKIP,
+ .clkr = {
+ .enable_reg = 0x52004,
+ .enable_mask = BIT(15),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_gpu_gpll0_clk_src",
+ .parent_hws = (const struct clk_hw *[]){
+ &gpll0.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+/* these are external clocks so add BRANCH_HALT_SKIP */
+static struct clk_branch gcc_gpu_gpll0_div_clk_src = {
+ .halt_check = BRANCH_HALT_SKIP,
+ .clkr = {
+ .enable_reg = 0x52004,
+ .enable_mask = BIT(16),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_gpu_gpll0_div_clk_src",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_gpu_gpll0_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_gpu_iref_clk = {
.halt_reg = 0x8c010,
.halt_check = BRANCH_HALT,
@@ -1698,6 +1732,40 @@ static struct clk_branch gcc_npu_cfg_ahb_clk = {
},
};

+/* external clocks so add BRANCH_HALT_SKIP */
+static struct clk_branch gcc_npu_gpll0_clk_src = {
+ .halt_check = BRANCH_HALT_SKIP,
+ .clkr = {
+ .enable_reg = 0x52004,
+ .enable_mask = BIT(18),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_npu_gpll0_clk_src",
+ .parent_hws = (const struct clk_hw *[]){
+ &gpll0.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+/* external clocks so add BRANCH_HALT_SKIP */
+static struct clk_branch gcc_npu_gpll0_div_clk_src = {
+ .halt_check = BRANCH_HALT_SKIP,
+ .clkr = {
+ .enable_reg = 0x52004,
+ .enable_mask = BIT(19),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_npu_gpll0_div_clk_src",
+ .parent_hws = (const struct clk_hw *[]){
+ &gcc_npu_gpll0_clk_src.clkr.hw },
+ .num_parents = 1,
+ .flags = CLK_SET_RATE_PARENT,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_npu_trig_clk = {
.halt_reg = 0x4d00c,
.halt_check = BRANCH_VOTED,
@@ -2812,6 +2880,45 @@ static struct clk_branch gcc_ufs_card_phy_aux_hw_ctl_clk = {
},
};

+/* external clocks so add BRANCH_HALT_SKIP */
+static struct clk_branch gcc_ufs_card_rx_symbol_0_clk = {
+ .halt_check = BRANCH_HALT_SKIP,
+ .clkr = {
+ .enable_reg = 0x7501c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_card_rx_symbol_0_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+/* external clocks so add BRANCH_HALT_SKIP */
+static struct clk_branch gcc_ufs_card_rx_symbol_1_clk = {
+ .halt_check = BRANCH_HALT_SKIP,
+ .clkr = {
+ .enable_reg = 0x750ac,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_card_rx_symbol_1_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+/* external clocks so add BRANCH_HALT_SKIP */
+static struct clk_branch gcc_ufs_card_tx_symbol_0_clk = {
+ .halt_check = BRANCH_HALT_SKIP,
+ .clkr = {
+ .enable_reg = 0x75018,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_card_tx_symbol_0_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_ufs_card_unipro_core_clk = {
.halt_reg = 0x75058,
.halt_check = BRANCH_HALT,
@@ -2992,6 +3099,45 @@ static struct clk_branch gcc_ufs_phy_phy_aux_hw_ctl_clk = {
},
};

+/* external clocks so add BRANCH_HALT_SKIP */
+static struct clk_branch gcc_ufs_phy_rx_symbol_0_clk = {
+ .halt_check = BRANCH_HALT_SKIP,
+ .clkr = {
+ .enable_reg = 0x7701c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_phy_rx_symbol_0_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+/* external clocks so add BRANCH_HALT_SKIP */
+static struct clk_branch gcc_ufs_phy_rx_symbol_1_clk = {
+ .halt_check = BRANCH_HALT_SKIP,
+ .clkr = {
+ .enable_reg = 0x770ac,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_phy_rx_symbol_1_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+/* external clocks so add BRANCH_HALT_SKIP */
+static struct clk_branch gcc_ufs_phy_tx_symbol_0_clk = {
+ .halt_check = BRANCH_HALT_SKIP,
+ .clkr = {
+ .enable_reg = 0x77018,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_ufs_phy_tx_symbol_0_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_ufs_phy_unipro_core_clk = {
.halt_reg = 0x77058,
.halt_check = BRANCH_HALT,
@@ -3171,6 +3317,19 @@ static struct clk_branch gcc_usb3_prim_phy_com_aux_clk = {
},
};

+/* external clocks so add BRANCH_HALT_SKIP */
+static struct clk_branch gcc_usb3_prim_phy_pipe_clk = {
+ .halt_check = BRANCH_HALT_SKIP,
+ .clkr = {
+ .enable_reg = 0xf058,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_usb3_prim_phy_pipe_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_usb3_sec_clkref_clk = {
.halt_reg = 0x8c028,
.halt_check = BRANCH_HALT,
@@ -3201,6 +3360,19 @@ static struct clk_branch gcc_usb3_sec_phy_aux_clk = {
},
};

+/* external clocks so add BRANCH_HALT_SKIP */
+static struct clk_branch gcc_usb3_sec_phy_pipe_clk = {
+ .halt_check = BRANCH_HALT_SKIP,
+ .clkr = {
+ .enable_reg = 0x10058,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_usb3_sec_phy_pipe_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_usb3_sec_phy_com_aux_clk = {
.halt_reg = 0x10054,
.halt_check = BRANCH_HALT,
@@ -3332,12 +3504,16 @@ static struct clk_regmap *gcc_sm8150_clocks[] = {
[GCC_GP3_CLK] = &gcc_gp3_clk.clkr,
[GCC_GP3_CLK_SRC] = &gcc_gp3_clk_src.clkr,
[GCC_GPU_CFG_AHB_CLK] = &gcc_gpu_cfg_ahb_clk.clkr,
+ [GCC_GPU_GPLL0_CLK_SRC] = &gcc_gpu_gpll0_clk_src.clkr,
+ [GCC_GPU_GPLL0_DIV_CLK_SRC] = &gcc_gpu_gpll0_div_clk_src.clkr,
[GCC_GPU_IREF_CLK] = &gcc_gpu_iref_clk.clkr,
[GCC_GPU_MEMNOC_GFX_CLK] = &gcc_gpu_memnoc_gfx_clk.clkr,
[GCC_GPU_SNOC_DVM_GFX_CLK] = &gcc_gpu_snoc_dvm_gfx_clk.clkr,
[GCC_NPU_AT_CLK] = &gcc_npu_at_clk.clkr,
[GCC_NPU_AXI_CLK] = &gcc_npu_axi_clk.clkr,
[GCC_NPU_CFG_AHB_CLK] = &gcc_npu_cfg_ahb_clk.clkr,
+ [GCC_NPU_GPLL0_CLK_SRC] = &gcc_npu_gpll0_clk_src.clkr,
+ [GCC_NPU_GPLL0_DIV_CLK_SRC] = &gcc_npu_gpll0_div_clk_src.clkr,
[GCC_NPU_TRIG_CLK] = &gcc_npu_trig_clk.clkr,
[GCC_PCIE0_PHY_REFGEN_CLK] = &gcc_pcie0_phy_refgen_clk.clkr,
[GCC_PCIE1_PHY_REFGEN_CLK] = &gcc_pcie1_phy_refgen_clk.clkr,
@@ -3442,6 +3618,9 @@ static struct clk_regmap *gcc_sm8150_clocks[] = {
[GCC_UFS_CARD_PHY_AUX_CLK_SRC] = &gcc_ufs_card_phy_aux_clk_src.clkr,
[GCC_UFS_CARD_PHY_AUX_HW_CTL_CLK] =
&gcc_ufs_card_phy_aux_hw_ctl_clk.clkr,
+ [GCC_UFS_CARD_RX_SYMBOL_0_CLK] = &gcc_ufs_card_rx_symbol_0_clk.clkr,
+ [GCC_UFS_CARD_RX_SYMBOL_1_CLK] = &gcc_ufs_card_rx_symbol_1_clk.clkr,
+ [GCC_UFS_CARD_TX_SYMBOL_0_CLK] = &gcc_ufs_card_tx_symbol_0_clk.clkr,
[GCC_UFS_CARD_UNIPRO_CORE_CLK] = &gcc_ufs_card_unipro_core_clk.clkr,
[GCC_UFS_CARD_UNIPRO_CORE_CLK_SRC] =
&gcc_ufs_card_unipro_core_clk_src.clkr,
@@ -3459,6 +3638,9 @@ static struct clk_regmap *gcc_sm8150_clocks[] = {
[GCC_UFS_PHY_PHY_AUX_CLK] = &gcc_ufs_phy_phy_aux_clk.clkr,
[GCC_UFS_PHY_PHY_AUX_CLK_SRC] = &gcc_ufs_phy_phy_aux_clk_src.clkr,
[GCC_UFS_PHY_PHY_AUX_HW_CTL_CLK] = &gcc_ufs_phy_phy_aux_hw_ctl_clk.clkr,
+ [GCC_UFS_PHY_RX_SYMBOL_0_CLK] = &gcc_ufs_phy_rx_symbol_0_clk.clkr,
+ [GCC_UFS_PHY_RX_SYMBOL_1_CLK] = &gcc_ufs_phy_rx_symbol_1_clk.clkr,
+ [GCC_UFS_PHY_TX_SYMBOL_0_CLK] = &gcc_ufs_phy_tx_symbol_0_clk.clkr,
[GCC_UFS_PHY_UNIPRO_CORE_CLK] = &gcc_ufs_phy_unipro_core_clk.clkr,
[GCC_UFS_PHY_UNIPRO_CORE_CLK_SRC] =
&gcc_ufs_phy_unipro_core_clk_src.clkr,
@@ -3480,10 +3662,12 @@ static struct clk_regmap *gcc_sm8150_clocks[] = {
[GCC_USB3_PRIM_PHY_AUX_CLK] = &gcc_usb3_prim_phy_aux_clk.clkr,
[GCC_USB3_PRIM_PHY_AUX_CLK_SRC] = &gcc_usb3_prim_phy_aux_clk_src.clkr,
[GCC_USB3_PRIM_PHY_COM_AUX_CLK] = &gcc_usb3_prim_phy_com_aux_clk.clkr,
+ [GCC_USB3_PRIM_PHY_PIPE_CLK] = &gcc_usb3_prim_phy_pipe_clk.clkr,
[GCC_USB3_SEC_CLKREF_CLK] = &gcc_usb3_sec_clkref_clk.clkr,
[GCC_USB3_SEC_PHY_AUX_CLK] = &gcc_usb3_sec_phy_aux_clk.clkr,
[GCC_USB3_SEC_PHY_AUX_CLK_SRC] = &gcc_usb3_sec_phy_aux_clk_src.clkr,
[GCC_USB3_SEC_PHY_COM_AUX_CLK] = &gcc_usb3_sec_phy_com_aux_clk.clkr,
+ [GCC_USB3_SEC_PHY_PIPE_CLK] = &gcc_usb3_sec_phy_pipe_clk.clkr,
[GCC_VIDEO_AHB_CLK] = &gcc_video_ahb_clk.clkr,
[GCC_VIDEO_AXI0_CLK] = &gcc_video_axi0_clk.clkr,
[GCC_VIDEO_AXI1_CLK] = &gcc_video_axi1_clk.clkr,
--
2.20.1

Next message: Marco Elver: "Re: [PATCH v2 4/8] seqlock, kcsan: Add annotations for KCSAN"
Previous message: Gregory CLEMENT: "[PATCH] spi: Fix NULL pointer when setting SPI_CS_HIGH for GPIO CS"
Next in thread: Stephen Boyd: "Re: [PATCH v2] clk: qcom: gcc: Add missing clocks in SM8150"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]