[PATCH v4 1/3] PCI: pciehp: Add support for disabling in-band presence
From: Stuart Hayes
Date: Fri Oct 25 2019 - 15:01:12 EST
From: Alexandru Gagniuc <mr.nuke.me@xxxxxxxxx>
The presence detect state (PDS) is normally a logical or of in-band and
out-of-band presence. As of PCIe 4.0, there is the option to disable
in-band presence so that the PDS bit always reflects the state of the
out-of-band presence.
The recommendation of the PCIe spec is to disable in-band presence
whenever supported.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@xxxxxxxxx>
---
drivers/pci/hotplug/pciehp.h | 1 +
drivers/pci/hotplug/pciehp_hpc.c | 9 ++++++++-
include/uapi/linux/pci_regs.h | 2 ++
3 files changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index 654c972b8ea0..27e4cd6529b0 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -83,6 +83,7 @@ struct controller {
struct pcie_device *pcie;
u32 slot_cap; /* capabilities and quirks */
+ unsigned int inband_presence_disabled:1;
u16 slot_ctrl; /* control register access */
struct mutex ctrl_lock;
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 1a522c1c4177..dc109d521f30 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -811,7 +811,7 @@ static inline void dbg_ctrl(struct controller *ctrl)
struct controller *pcie_init(struct pcie_device *dev)
{
struct controller *ctrl;
- u32 slot_cap, link_cap;
+ u32 slot_cap, slot_cap2, link_cap;
u8 poweron;
struct pci_dev *pdev = dev->port;
struct pci_bus *subordinate = pdev->subordinate;
@@ -869,6 +869,13 @@ struct controller *pcie_init(struct pcie_device *dev)
FLAG(link_cap, PCI_EXP_LNKCAP_DLLLARC),
pdev->broken_cmd_compl ? " (with Cmd Compl erratum)" : "");
+ pcie_capability_read_dword(pdev, PCI_EXP_SLTCAP2, &slot_cap2);
+ if (slot_cap2 & PCI_EXP_SLTCAP2_IBPD) {
+ pcie_write_cmd_nowait(ctrl, PCI_EXP_SLTCTL_IBPD_DISABLE,
+ PCI_EXP_SLTCTL_IBPD_DISABLE);
+ ctrl->inband_presence_disabled = 1;
+ }
+
/*
* If empty slot's power status is on, turn power off. The IRQ isn't
* requested yet, so avoid triggering a notification with this command.
diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h
index 29d6e93fd15e..ea1cf9546e4d 100644
--- a/include/uapi/linux/pci_regs.h
+++ b/include/uapi/linux/pci_regs.h
@@ -604,6 +604,7 @@
#define PCI_EXP_SLTCTL_PWR_OFF 0x0400 /* Power Off */
#define PCI_EXP_SLTCTL_EIC 0x0800 /* Electromechanical Interlock Control */
#define PCI_EXP_SLTCTL_DLLSCE 0x1000 /* Data Link Layer State Changed Enable */
+#define PCI_EXP_SLTCTL_IBPD_DISABLE 0x4000 /* In-band PD disable */
#define PCI_EXP_SLTSTA 26 /* Slot Status */
#define PCI_EXP_SLTSTA_ABP 0x0001 /* Attention Button Pressed */
#define PCI_EXP_SLTSTA_PFD 0x0002 /* Power Fault Detected */
@@ -676,6 +677,7 @@
#define PCI_EXP_LNKSTA2 50 /* Link Status 2 */
#define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 52 /* v2 endpoints with link end here */
#define PCI_EXP_SLTCAP2 52 /* Slot Capabilities 2 */
+#define PCI_EXP_SLTCAP2_IBPD 0x0001 /* In-band PD Disable Supported */
#define PCI_EXP_SLTCTL2 56 /* Slot Control 2 */
#define PCI_EXP_SLTSTA2 58 /* Slot Status 2 */
--
2.18.1