[PATCH 0/2] [PATCH 0/2] arm64: dts: ti: k3-j721e: Add USB ports

[Roger Quadros]

Hi,

This series enables USB 2.0 support on j721e-common-proc-board.

The USB0 is available as a type-C port. Although it is super-speed
capable, we limit it to high-speed for now till SERDES PHY
support is added.

USB1 is routed via on-board USB2.0 hub to 2 type-A ports. USB1
is used as high-speed host.

Controller side DT binding is approved [1]. Driver [2] is yet to be
in USB tree. This series is safe to be picked for -next.

[1] https://lkml.org/lkml/2019/10/25/1036
[2] https://lkml.org/lkml/2019/10/24/371

Series is based on top of Tero's ti-k3-next branch.

cheers,
-roger

Roger Quadros (2):
  arm64: dts: ti: k3-j721e-main: add USB controller nodes
  arm64: dts: ti: k3-j721e-common-proc-board: Add USB ports

 .../dts/ti/k3-j721e-common-proc-board.dts     | 35 +++++++++++
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi     | 60 +++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-j721e.dtsi          |  2 +
 3 files changed, 97 insertions(+)

-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki