Re: [PATCH v1] clk: tegra20/30: Optimize PLLX configuration restoring

[Peter De Schrijver]

On Mon, Sep 23, 2019 at 12:52:03AM +0300, Dmitry Osipenko wrote:
> There is no need to re-configure PLLX if its configuration in unchanged
> on return from suspend / cpuidle, this saves 300us if PLLX is already
> enabled (common case for cpuidle).
> 
> Signed-off-by: Dmitry Osipenko <digetx@xxxxxxxxx>

Acked-by: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>

> ---
>  drivers/clk/tegra/clk-tegra20.c | 25 ++++++++++++++++---------
>  drivers/clk/tegra/clk-tegra30.c | 25 ++++++++++++++++---------
>  2 files changed, 32 insertions(+), 18 deletions(-)
> 
> diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c
> index cceefbd67a3b..4d8222f5c638 100644
> --- a/drivers/clk/tegra/clk-tegra20.c
> +++ b/drivers/clk/tegra/clk-tegra20.c
> @@ -955,6 +955,7 @@ static void tegra20_cpu_clock_suspend(void)
>  static void tegra20_cpu_clock_resume(void)
>  {
>  	unsigned int reg, policy;
> +	u32 misc, base;
>  
>  	/* Is CPU complex already running on PLLX? */
>  	reg = readl(clk_base + CCLK_BURST_POLICY);
> @@ -968,15 +969,21 @@ static void tegra20_cpu_clock_resume(void)
>  		BUG();
>  
>  	if (reg != CCLK_BURST_POLICY_PLLX) {
> -		/* restore PLLX settings if CPU is on different PLL */
> -		writel(tegra20_cpu_clk_sctx.pllx_misc,
> -					clk_base + PLLX_MISC);
> -		writel(tegra20_cpu_clk_sctx.pllx_base,
> -					clk_base + PLLX_BASE);
> -
> -		/* wait for PLL stabilization if PLLX was enabled */
> -		if (tegra20_cpu_clk_sctx.pllx_base & (1 << 30))
> -			udelay(300);
> +		misc = readl_relaxed(clk_base + PLLX_MISC);
> +		base = readl_relaxed(clk_base + PLLX_BASE);
> +
> +		if (misc != tegra20_cpu_clk_sctx.pllx_misc ||
> +		    base != tegra20_cpu_clk_sctx.pllx_base) {
> +			/* restore PLLX settings if CPU is on different PLL */
> +			writel(tegra20_cpu_clk_sctx.pllx_misc,
> +						clk_base + PLLX_MISC);
> +			writel(tegra20_cpu_clk_sctx.pllx_base,
> +						clk_base + PLLX_BASE);
> +
> +			/* wait for PLL stabilization if PLLX was enabled */
> +			if (tegra20_cpu_clk_sctx.pllx_base & (1 << 30))
> +				udelay(300);
> +		}
>  	}
>  
>  	/*
> diff --git a/drivers/clk/tegra/clk-tegra30.c b/drivers/clk/tegra/clk-tegra30.c
> index a19840fac716..3b5bca44b7aa 100644
> --- a/drivers/clk/tegra/clk-tegra30.c
> +++ b/drivers/clk/tegra/clk-tegra30.c
> @@ -1135,6 +1135,7 @@ static void tegra30_cpu_clock_suspend(void)
>  static void tegra30_cpu_clock_resume(void)
>  {
>  	unsigned int reg, policy;
> +	u32 misc, base;
>  
>  	/* Is CPU complex already running on PLLX? */
>  	reg = readl(clk_base + CLK_RESET_CCLK_BURST);
> @@ -1148,15 +1149,21 @@ static void tegra30_cpu_clock_resume(void)
>  		BUG();
>  
>  	if (reg != CLK_RESET_CCLK_BURST_POLICY_PLLX) {
> -		/* restore PLLX settings if CPU is on different PLL */
> -		writel(tegra30_cpu_clk_sctx.pllx_misc,
> -					clk_base + CLK_RESET_PLLX_MISC);
> -		writel(tegra30_cpu_clk_sctx.pllx_base,
> -					clk_base + CLK_RESET_PLLX_BASE);
> -
> -		/* wait for PLL stabilization if PLLX was enabled */
> -		if (tegra30_cpu_clk_sctx.pllx_base & (1 << 30))
> -			udelay(300);
> +		misc = readl_relaxed(clk_base + CLK_RESET_PLLX_MISC);
> +		base = readl_relaxed(clk_base + CLK_RESET_PLLX_BASE);
> +
> +		if (misc != tegra30_cpu_clk_sctx.pllx_misc ||
> +		    base != tegra30_cpu_clk_sctx.pllx_base) {
> +			/* restore PLLX settings if CPU is on different PLL */
> +			writel(tegra30_cpu_clk_sctx.pllx_misc,
> +						clk_base + CLK_RESET_PLLX_MISC);
> +			writel(tegra30_cpu_clk_sctx.pllx_base,
> +						clk_base + CLK_RESET_PLLX_BASE);
> +
> +			/* wait for PLL stabilization if PLLX was enabled */
> +			if (tegra30_cpu_clk_sctx.pllx_base & (1 << 30))
> +				udelay(300);
> +		}
>  	}
>  
>  	/*
> -- 
> 2.23.0
>