On Mon, Oct 21, 2019 at 02:39:18PM +0800, Dilip Kota wrote:Agree will add it.
Add YAML shcemas for PCIe RC controller on Intel Gateway SoCsFails to validate:
which is Synopsys DesignWare based PCIe core.
changes on v4:
Add "snps,dw-pcie" compatible.
Rename phy-names property value to pcie.
And maximum and minimum values to num-lanes.
Add ref for reset-assert-ms entry and update the
description for easy understanding.
Remove pcie core interrupt entry.
changes on v3:
Add the appropriate License-Identifier
Rename intel,rst-interval to 'reset-assert-us'
Add additionalProperties: false
Rename phy-names to 'pciephy'
Remove the dtsi node split of SoC and board in the example
Add #interrupt-cells = <1>; or else interrupt parsing will fail
Name yaml file with compatible name
Signed-off-by: Dilip Kota <eswara.kota@xxxxxxxxxxxxxxx>
---
.../devicetree/bindings/pci/intel-gw-pcie.yaml | 135 +++++++++++++++++++++
1 file changed, 135 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
Error: Documentation/devicetree/bindings/pci/intel-gw-pcie.example.dts:38.27-28 syntax error
FATAL ERROR: Unable to parse input tree
scripts/Makefile.lib:321: recipe for target 'Documentation/devicetree/bindings/pci/intel-gw-pcie.example.dt.yaml' failed
Please run 'make -k dt_binding_check' (-k because there are some
unrelated failures).
diff --git a/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yamlHow many entries do you expect? Add a 'maxItems' to define.
new file mode 100644
index 000000000000..49dd87ec1e3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
@@ -0,0 +1,135 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/intel-gw-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PCIe RC controller on Intel Gateway SoCs
+
+maintainers:
+ - Dilip Kota <eswara.kota@xxxxxxxxxxxxxxx>
+
+properties:
+ compatible:
+ items:
+ - const: intel,lgm-pcie
+ - const: snps,dw-pcie
+
+ device_type:
+ const: pci
+
+ "#address-cells":
+ const: 3
+
+ "#size-cells":
+ const: 2
+
+ reg:
+ items:
+ - description: Controller control and status registers.
+ - description: PCIe configuration registers.
+ - description: Controller application registers.
+
+ reg-names:
+ items:
+ - const: dbi
+ - const: config
+ - const: app
+
+ ranges:
+ description: Ranges for the PCI memory and I/O regions.
One. I will mention maxItems: 1
+How many clocks?
+ resets:
+ maxItems: 1
+
+ clocks:
+ description: PCIe registers interface clock.
Ok.
+Just a value of 'true' is fine here.
+ phys:
+ maxItems: 1
+
+ phy-names:
+ const: pcie
+
+ reset-gpios:
+ maxItems: 1
+
+ num-lanes:
+ minimum: 1
+ maximum: 2
+ description: Number of lanes to use for this port.
+
+ linux,pci-domain:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: PCI domain ID.
Sure, will add it.
+Allowed values? Default?
+ '#interrupt-cells':
+ const: 1
+
+ interrupt-map-mask:
+ description: Standard PCI IRQ mapping properties.
+
+ interrupt-map:
+ description: Standard PCI IRQ mapping properties.
+
+ max-link-speed:
+ description: Specify PCI Gen for link capability.
Ok.
+Don't need a type for standard units.
+ bus-range:
+ description: Range of bus numbers associated with this controller.
+
+ reset-assert-ms:
+ $ref: /schemas/types.yaml#/definitions/uint32
Sure i will update it.
+ description: |Express as a schema:
+ Delay after asserting reset to the PCIe device.
+ Some devices need an interval upto 500ms. By default it is 100ms.
maximum: 500
default: 100
Agree, will fix it.
+Shouldn't be required. It should have a default.
+required:
+ - compatible
+ - device_type
+ - reg
+ - reg-names
+ - ranges
+ - resets
+ - clocks
+ - phys
+ - phy-names
+ - reset-gpios
+ - num-lanes
Yes, not required. I will update,
+ - linux,pci-domainIs this really required? AIUI, domains are optional and only used if
you have more than one host.
Agree, i will fix it.
+ - interrupt-mapspace ^
+ - interrupt-map-mask
+
+additionalProperties: false
+
+examples:
+ - |
+ pcie10:pcie@d0e00000 {
Yes, i will add it.
+ compatible = "intel,lgm-pcie", "snps,dw-pcie";You need to include any defines you use. That's why the example fails to
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ reg = <0xd0e00000 0x1000>,
+ <0xd2000000 0x800000>,
+ <0xd0a41000 0x1000>;
+ reg-names = "dbi", "config", "app";
+ linux,pci-domain = <0>;
+ max-link-speed = <4>;
+ bus-range = <0x00 0x08>;
+ interrupt-parent = <&ioapic1>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &ioapic1 27 1>,
+ <0 0 0 2 &ioapic1 28 1>,
+ <0 0 0 3 &ioapic1 29 1>,
+ <0 0 0 4 &ioapic1 30 1>;
+ ranges = <0x02000000 0 0xd4000000 0xd4000000 0 0x04000000>;
+ resets = <&rcu0 0x50 0>;
+ clocks = <&cgu0 LGM_GCLK_PCIE10>;
build.
OK, will fix it.
+ phys = <&cb0phy0>;Don't show status in examples.
+ phy-names = "pcie";
+ status = "okay";
+ reset-assert-ms = <500>;
+ reset-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ num-lanes = <2>;
+ };
--
2.11.0