Re: [Patch 02/19] dt-bindings: media: cal: update binding example

From: Rob Herring
Date: Tue Oct 29 2019 - 09:22:01 EST


On Fri, Oct 18, 2019 at 10:34:20AM -0500, Benoit Parrot wrote:
> Update binding example to show proper endpoint properties and linkage.
>
> Signed-off-by: Benoit Parrot <bparrot@xxxxxx>
> ---
> .../devicetree/bindings/media/ti-cal.txt | 32 ++++++++++---------
> 1 file changed, 17 insertions(+), 15 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/media/ti-cal.txt b/Documentation/devicetree/bindings/media/ti-cal.txt
> index 782f801b12a9..6b56fddcfc4a 100644
> --- a/Documentation/devicetree/bindings/media/ti-cal.txt
> +++ b/Documentation/devicetree/bindings/media/ti-cal.txt
> @@ -27,7 +27,6 @@ Documentation/devicetree/bindings/media/video-interfaces.txt.
> Example:
> cal: cal@4845b000 {
> compatible = "ti,dra72-cal";
> - ti,hwmods = "cal";
> reg = <0x4845B000 0x400>,
> <0x4845B800 0x40>,
> <0x4845B900 0x40>;
> @@ -45,9 +44,10 @@ Example:
>
> csi2_0: port@0 {
> reg = <0>;
> - endpoint {
> - slave-mode;
> - remote-endpoint = <&ar0330_1>;
> + csi2_phy0: endpoint@0 {

Unit address without 'reg' is not correct.

> + remote-endpoint = <&csi2_cam0>;
> + clock-lanes = <0>;
> + data-lanes = <1 2>;
> };
> };
> csi2_1: port@1 {
> @@ -57,19 +57,21 @@ Example:
> };
>
> i2c5: i2c@4807c000 {
> - ar0330@10 {
> - compatible = "ti,ar0330";
> - reg = <0x10>;
> + status = "okay";

Don't show status in examples.

> + clock-frequency = <400000>;
>
> - port {
> - #address-cells = <1>;
> - #size-cells = <0>;
> + ov5640@3c {

camera-sensor@3c

> + compatible = "ovti,ov5640";
> + reg = <0x3c>;
> +
> + clocks = <&clk_ov5640_fixed>;
> + clock-names = "xclk";
>
> - ar0330_1: endpoint {
> - reg = <0>;
> - clock-lanes = <1>;
> - data-lanes = <0 2 3 4>;
> - remote-endpoint = <&csi2_0>;
> + port {
> + csi2_cam0: endpoint {
> + remote-endpoint = <&csi2_phy0>;
> + clock-lanes = <0>;
> + data-lanes = <1 2>;
> };
> };
> };
> --
> 2.17.1
>