[RFC 14/17] firmware: qcom_scm-32: Add device argument to atomic calls

[Elliot Berman]

Add this unused parameter to reduce merge friction between SMCCC and
legacy based conventions.

Signed-off-by: Elliot Berman <eberman@xxxxxxxxxxxxxx>
---
 drivers/firmware/qcom_scm-32.c | 18 ++++++++++--------
 drivers/firmware/qcom_scm-64.c |  5 +++--
 drivers/firmware/qcom_scm.c    |  4 ++--
 drivers/firmware/qcom_scm.h    |  5 +++--
 4 files changed, 18 insertions(+), 14 deletions(-)

diff --git a/drivers/firmware/qcom_scm-32.c b/drivers/firmware/qcom_scm-32.c
index f9eb490..a33fdf1 100644
--- a/drivers/firmware/qcom_scm-32.c
+++ b/drivers/firmware/qcom_scm-32.c
@@ -273,7 +273,7 @@ static int qcom_scm_call(struct device *dev, struct qcom_scm_desc *desc)
  * This shall only be used with commands that are guaranteed to be
  * uninterruptable, atomic and SMP safe.
  */
-static int qcom_scm_call_atomic(struct qcom_scm_desc *desc)
+static int qcom_scm_call_atomic(struct device *dev, struct qcom_scm_desc *desc)
 {
 	int context_id;
 	struct arm_smccc_args smc = {0};
@@ -306,7 +306,8 @@ static int qcom_scm_call_atomic(struct qcom_scm_desc *desc)
  * Set the cold boot address of the cpus. Any cpu outside the supported
  * range would be removed from the cpu present mask.
  */
-int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
+int __qcom_scm_set_cold_boot_addr(struct device *dev, void *entry,
+				  const cpumask_t *cpus)
 {
 	int flags = 0;
 	int cpu;
@@ -336,7 +337,7 @@ int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
 	desc.args[1] = virt_to_phys(entry);
 	desc.arginfo = QCOM_SCM_ARGS(2);
 
-	return qcom_scm_call_atomic(&desc);
+	return qcom_scm_call_atomic(dev, &desc);
 }
 
 /**
@@ -391,7 +392,7 @@ int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
  * the control would return from this function, otherwise, the cpu jumps to the
  * warm boot entry point set for this cpu upon reset.
  */
-void __qcom_scm_cpu_power_down(u32 flags)
+void __qcom_scm_cpu_power_down(struct device *dev, u32 flags)
 {
 	struct qcom_scm_desc desc = {
 		.svc = QCOM_SCM_SVC_BOOT,
@@ -401,7 +402,7 @@ void __qcom_scm_cpu_power_down(u32 flags)
 		.owner = ARM_SMCCC_OWNER_SIP,
 	};
 
-	qcom_scm_call_atomic(&desc);
+	qcom_scm_call_atomic(dev, &desc);
 }
 
 int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
@@ -434,7 +435,7 @@ int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
 	desc.args[1] = enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0;
 	desc.arginfo = QCOM_SCM_ARGS(2);
 
-	return qcom_scm_call_atomic(&desc);
+	return qcom_scm_call_atomic(dev, &desc);
 }
 
 bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral)
@@ -555,11 +556,12 @@ int __qcom_scm_io_readl(struct device *dev, phys_addr_t addr,
 	desc.args[0] = addr;
 	desc.arginfo = QCOM_SCM_ARGS(1);
 
-	ret = qcom_scm_call_atomic(&desc);
+	ret = qcom_scm_call_atomic(dev, &desc);
 	if (ret >= 0)
 		*val = desc.res[0];
 
 	return ret < 0 ? ret : 0;
+	
 }
 
 int __qcom_scm_io_writel(struct device *dev, phys_addr_t addr, unsigned int val)
@@ -574,7 +576,7 @@ int __qcom_scm_io_writel(struct device *dev, phys_addr_t addr, unsigned int val)
 	desc.args[1] = val;
 	desc.arginfo = QCOM_SCM_ARGS(2);
 
-	return qcom_scm_call_atomic(&desc);
+	return qcom_scm_call_atomic(dev, &desc);
 }
 
 int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id)
diff --git a/drivers/firmware/qcom_scm-64.c b/drivers/firmware/qcom_scm-64.c
index 4d7fd3e..9f39483 100644
--- a/drivers/firmware/qcom_scm-64.c
+++ b/drivers/firmware/qcom_scm-64.c
@@ -221,7 +221,8 @@ static int qcom_scm_call_atomic(struct device *dev, struct qcom_scm_desc *desc)
  * Set the cold boot address of the cpus. Any cpu outside the supported
  * range would be removed from the cpu present mask.
  */
-int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
+int __qcom_scm_set_cold_boot_addr(struct device *dev, void *entry,
+				  const cpumask_t *cpus)
 {
 	return -ENOTSUPP;
 }
@@ -249,7 +250,7 @@ int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
  * the control would return from this function, otherwise, the cpu jumps to the
  * warm boot entry point set for this cpu upon reset.
  */
-void __qcom_scm_cpu_power_down(u32 flags)
+void __qcom_scm_cpu_power_down(struct device *dev, u32 flags)
 {
 }
 
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index 7244236..bb57fad 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -97,7 +97,7 @@ static void qcom_scm_clk_disable(void)
  */
 int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
 {
-	return __qcom_scm_set_cold_boot_addr(entry, cpus);
+	return __qcom_scm_set_cold_boot_addr(__scm->dev, entry, cpus);
 }
 EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr);
 
@@ -125,7 +125,7 @@ EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr);
  */
 void qcom_scm_cpu_power_down(u32 flags)
 {
-	__qcom_scm_cpu_power_down(flags);
+	__qcom_scm_cpu_power_down(__scm->dev, flags);
 }
 EXPORT_SYMBOL(qcom_scm_cpu_power_down);
 
diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h
index 6f63ca6..ce2c396 100644
--- a/drivers/firmware/qcom_scm.h
+++ b/drivers/firmware/qcom_scm.h
@@ -9,10 +9,11 @@
 #define QCOM_SCM_BOOT_TERMINATE_PC		0x02
 #define QCOM_SCM_BOOT_SET_REMOTE_STATE		0x0a
 #define QCOM_SCM_BOOT_SET_DLOAD_MODE		0x10
-extern int __qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus);
+extern int __qcom_scm_set_cold_boot_addr(struct device *dev, void *entry,
+		const cpumask_t *cpus);
 extern int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
 		const cpumask_t *cpus);
-extern void __qcom_scm_cpu_power_down(u32 flags);
+extern void __qcom_scm_cpu_power_down(struct device *dev, u32 flags);
 extern int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id);
 extern int __qcom_scm_set_dload_mode(struct device *dev, bool enable);
 #define QCOM_SCM_FLUSH_FLAG_MASK	0x3
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project