[PATCH v2 1/2] dt-bindings: spi: Add schema for Cadence QSPI Controller driver

[Ramuthevar,Vadivel MuruganX]

From: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>

Add dt-bindings documentation for Cadence-QSPI controller to support
spi based flash memories.

Signed-off-by: Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
---
 .../devicetree/bindings/spi/cadence,qspi.yaml      | 65 ++++++++++++++++++++++
 1 file changed, 65 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/spi/cadence,qspi.yaml

diff --git a/Documentation/devicetree/bindings/spi/cadence,qspi.yaml b/Documentation/devicetree/bindings/spi/cadence,qspi.yaml
new file mode 100644
index 000000000000..295501f01e5e
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/cadence,qspi.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/spi/cadence,qspi.yaml#";
+$schema: "http://devicetree.org/meta-schemas/core.yaml#";
+
+title: Cadence QSPI Flash Controller support
+
+maintainers:
+  - Ramuthevar Vadivel Murugan <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx>
+
+allOf:
+  - $ref: "spi-controller.yaml#"
+
+description: |
+  Add support for the Cadence QSPI controller,This controller is
+  present in the Intel LGM, Altera SoCFPGA and TI SoCs and this driver
+  has been tested On Intel's LGM SoC.
+
+properties:
+  compatible:
+    const: cadence,qspi
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clocks-names:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+
+examples:
+  - |
+    spi@ec000000 {
+          compatible = "cadence,qspi";
+          reg = <0xec000000 0x100>;
+          clocks = <&cgu0 LGM_CLK_QSPI>, <&cgu0 LGM_GCLK_QSPI>;
+          clock-names = "qspi";
+          resets = <&rcu0 0x10 1>;
+          reset-names = "qspi";
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          flash: flash@1 {
+              compatible = "spi-nand", "jedec, spi-nor";
+              reg = <1>;
+              spi-max-frequency = <10000000>;
+          };
+    };
+
-- 
2.11.0