Re: [PATCH v4 0/2] Add IMX296 CMOS image sensor support

From: Laurent Pinchart
Date: Thu Oct 31 2019 - 09:16:57 EST


Hi Mani,

Thank you for the patches.

On Wed, Oct 30, 2019 at 03:19:00PM +0530, Manivannan Sadhasivam wrote:
> Hello,
>
> This patchset adds support for IMX296 CMOS image sensor from Sony.
> Sensor can be programmed through I2C and 4-wire interface but the
> current driver only supports I2C interface. The sensor is
> capable of outputting frames in CSI2 format (1 Lane). In the case
> of sensor resolution, driver only supports 1440x1088 at 30 FPS.
>
> The driver has been validated using Framos IMX296 module interfaced to
> 96Boards Dragonboard410c.

I've just been made aware of your work. I also worked on an IMX296
sensor driver in parallel, which I will post to the list. My driver
doesn't hardcode the resolution but computes register values at runtime,
so I wonder if it could be a better option. I'll post it now.

> Changes in v4:
>
> * Fixed issues related to gain settings and few misc cleanups in driver
> * Documented port node and removed maxItems, default prop from dt binding
> as per the review
>
> Changes in v3:
>
> * Fixed the reference to video-interfaces.txt in binding.
>
> Changes in v2:
>
> * Switched to YAML binding
>
> Manivannan Sadhasivam (2):
> dt-bindings: media: i2c: Add IMX296 CMOS sensor binding
> media: i2c: Add IMX296 CMOS image sensor driver
>
> .../devicetree/bindings/media/i2c/imx296.yaml | 94 +++
> MAINTAINERS | 8 +
> drivers/media/i2c/Kconfig | 11 +
> drivers/media/i2c/Makefile | 1 +
> drivers/media/i2c/imx296.c | 715 ++++++++++++++++++
> 5 files changed, 829 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/imx296.yaml
> create mode 100644 drivers/media/i2c/imx296.c

--
Regards,

Laurent Pinchart