Hi Adrian,
On Thu, 31 Oct 2019 at 14:26, Adrian Ratiu <adrian.ratiu@xxxxxxxxxxxxx> wrote:Have you considered keeping the difference internal to the dw-mipi-dsi driver? Say having the iMX6 module "request" the v1.01 regmap from the bridge driver, while rockchip/others doing the equivalent.
Having a generic Synopsis DesignWare MIPI-DSI host controller bridge driver is a very good idea, however the current implementation has hardcoded quite a lot of the register layouts used by the two supported SoC vendors, STM and Rockchip, which use IP cores v1.30 and v1.31.
This makes it hard to support other SoC vendors like the FSL/NXP i.MX 6 which use older v1.01 cores or future versions because, based on history, layout changes should also be expected in new DSI versions / SoCs.
This patch series converts the bridge and platform drivers to access registers via generic regmap APIs and allows each platform driver to configure its register layout via struct reg_fields, then adds support for the host controller found on i.MX 6.
.../bindings/display/imx/mipi-dsi.txt | 56 ++ drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 518 +++++++++--------- drivers/gpu/drm/imx/Kconfig | 7 + drivers/gpu/drm/imx/Makefile | 1 + drivers/gpu/drm/imx/dw_mipi_dsi-imx.c | 502 +++++++++++++++++ .../gpu/drm/rockchip/dw-mipi-dsi-rockchip.c | 154 +++++- drivers/gpu/drm/stm/dw_mipi_dsi-stm.c | 160 +++++- include/drm/bridge/dw_mipi_dsi.h | 60 +- 8 files changed, 1185 insertions(+), 273 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/imx/mipi-dsi.txt create mode 100644 drivers/gpu/drm/imx/dw_mipi_dsi-imx.c
This should make the delta a lot smaller, avoiding the unnecessary copy of register fields and regmap. Plus plugging future users will be dead trivial.
-Emil
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-rockchip