[PATCH] arm64: defconfig: Change CONFIG_AT803X_PHY from m to y

[Peng Fan]

From: Peng Fan <peng.fan@xxxxxxx>

With phy-reset-gpios are enabled for i.MX8MM-EVK board, phy
will be reset. Without CONFIG_AT803X_PHY as y, board will stop
booting in NFS DHCP, because phy is not ready. So mark
CONFIG_AT803X_PHY from m to y to make board boot when using nfs rootfs.

Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
---
 arch/arm64/configs/defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index c9a867ac32d4..cd778c9ea8a4 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -285,7 +285,7 @@ CONFIG_SNI_AVE=y
 CONFIG_SNI_NETSEC=y
 CONFIG_STMMAC_ETH=m
 CONFIG_MDIO_BUS_MUX_MMIOREG=y
-CONFIG_AT803X_PHY=m
+CONFIG_AT803X_PHY=y
 CONFIG_MARVELL_PHY=m
 CONFIG_MARVELL_10G_PHY=m
 CONFIG_MESON_GXL_PHY=m
-- 
2.16.4