[PATCH 1/2] ARM: dts: bcm2711: force CMA into first GB of memory

[Nicolas Saenz Julienne]

arm64 places the CMA in ZONE_DMA32, which is not good enough for the
Raspberry Pi 4 since it contains peripherals that can only address the
first GB of memory. Explicitly place the CMA into that area.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@xxxxxxx>
---
 arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index cccc1ccd19be..3c7833e9005a 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -19,6 +19,25 @@
 		reg = <0 0 0>;
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges;
+
+		/*
+		 * arm64 reserves the CMA by default somewhere in ZONE_DMA32,
+		 * that's not good enough for the Raspberry Pi 4 as some
+		 * devices can only address the lower 1G of memory (ZONE_DMA).
+		 */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x2000000>; /* 32MB */
+			alloc-ranges = <0x0 0x00000000 0x40000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
 	leds {
 		act {
 			gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
-- 
2.23.0