Re: [EXT] [PATCH] net: fec: add missed clk_disable_unprepare in remove

[Chuhong Yuan]

On Tue, Nov 5, 2019 at 9:26 AM Andy Duan <fugang.duan@xxxxxxx> wrote:
>
> From: Chuhong Yuan <hslester96@xxxxxxxxx> Sent: Monday, November 4, 2019 11:50 PM
> > This driver forgets to disable and unprepare clks when remove.
> > Add calls to clk_disable_unprepare to fix it.
> >
> > Signed-off-by: Chuhong Yuan <hslester96@xxxxxxxxx>
>
> If runtime is enabled, the patch will introduce clock count mis-match.
> Probe->
>     Enable clk_ipg, clk_ahb clocks
>     ...
>     In the end, runtime auto suspend callback disable clk_ipg, clk_ahb clocks.
>
> You should check CONFIG_PM is enabled or not in your platform, if not,
> it can disable these two clocks by checking CONFIG_PM.
>

Thanks for your hint!
But I am still not very clear about the mechanism.
In my opinion, it means that if CONFIG_PM is disabled, runtime_suspend will
be called automatically to disable clks.
Therefore, #ifdef CONFIG_PM check should be added before disabling
clks in remove.
I am not sure whether this understanding is right or not?

Regards,
Chuhong

> Regards,
> Andy
> > ---
> >  drivers/net/ethernet/freescale/fec_main.c | 2 ++
> >  1 file changed, 2 insertions(+)
> >
> > diff --git a/drivers/net/ethernet/freescale/fec_main.c
> > b/drivers/net/ethernet/freescale/fec_main.c
> > index 22c01b224baa..a9c386b63581 100644
> > --- a/drivers/net/ethernet/freescale/fec_main.c
> > +++ b/drivers/net/ethernet/freescale/fec_main.c
> > @@ -3645,6 +3645,8 @@ fec_drv_remove(struct platform_device *pdev)
> >                 regulator_disable(fep->reg_phy);
> >         pm_runtime_put(&pdev->dev);
> >         pm_runtime_disable(&pdev->dev);
> > +       clk_disable_unprepare(fep->clk_ahb);
> > +       clk_disable_unprepare(fep->clk_ipg);
> >         if (of_phy_is_fixed_link(np))
> >                 of_phy_deregister_fixed_link(np);
> >         of_node_put(fep->phy_node);
> > --
> > 2.23.0
>