Re: [PATCH] dt-bindings: iio: adc: Migrate MCP3911 documentation to yaml

[Rob Herring]

On Tue, Oct 29, 2019 at 10:11:42PM +0100, Marcus Folkesson wrote:
> Rewrite bindings to use json-schema vocabulary.
> 
> Signed-off-by: Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
> ---
>  .../devicetree/bindings/iio/adc/mcp3911.txt   | 30 --------
>  .../bindings/iio/adc/microchip,mcp3911.yaml   | 72 +++++++++++++++++++
>  MAINTAINERS                                   |  2 +-
>  3 files changed, 73 insertions(+), 31 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/iio/adc/mcp3911.txt
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/mcp3911.txt b/Documentation/devicetree/bindings/iio/adc/mcp3911.txt
> deleted file mode 100644
> index 3071f48fb30b..000000000000
> --- a/Documentation/devicetree/bindings/iio/adc/mcp3911.txt
> +++ /dev/null
> @@ -1,30 +0,0 @@
> -* Microchip MCP3911 Dual channel analog front end (ADC)
> -
> -Required properties:
> - - compatible: Should be "microchip,mcp3911"
> - - reg: SPI chip select number for the device
> -
> -Recommended properties:
> - - spi-max-frequency: Definition as per
> -	 Documentation/devicetree/bindings/spi/spi-bus.txt.
> -	 Max frequency for this chip is 20MHz.
> -
> -Optional properties:
> - - clocks: Phandle and clock identifier for sampling clock
> - - interrupt-parent: Phandle to the parent interrupt controller
> - - interrupts: IRQ line for the ADC
> - - microchip,device-addr: Device address when multiple MCP3911 chips are present on the
> -	same SPI bus. Valid values are 0-3. Defaults to 0.
> - - vref-supply: Phandle to the external reference voltage supply.
> -
> -Example:
> -adc@0 {
> -	compatible = "microchip,mcp3911";
> -	reg = <0>;
> -	interrupt-parent = <&gpio5>;
> -	interrupts = <15 IRQ_TYPE_EDGE_RISING>;
> -	spi-max-frequency = <20000000>;
> -	microchip,device-addr = <0>;
> -	vref-supply = <&vref_reg>;
> -	clocks = <&xtal>;
> -};
> diff --git a/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
> new file mode 100644
> index 000000000000..bfcf6a5fb44e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
> @@ -0,0 +1,72 @@
> +# SPDX-License-Identifier: GPL-2.0
> +# Copyright 2019 Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/bindings/iio/adc/microchip,mcp3911.yaml#";
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
> +
> +title: Microchip MCP3911 Dual channel analog front end (ADC)
> +
> +maintainers:
> +  - Marcus Folkesson <marcus.folkesson@xxxxxxxxx>
> +  - Kent Gustavsson <nedo80@xxxxxxxxx>
> +
> +description: |
> +  Bindings for the Microchip MCP3911 Dual channel ADC device. Datasheet can be
> +  found here: https://ww1.microchip.com/downloads/en/DeviceDoc/20002286C.pdf
> +
> +properties:
> +  compatible:
> +    enum:
> +      - microchip,mcp3911
> +
> +  reg:
> +    description: SPI chip select number for the device

No need to describe common properties if you have nothing special for 
this device to say.

> +    maxItems: 1
> +
> +  spi-max-frequency:
> +    description: |
> +      Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt.

Same here.

> +    maximum: 20000000
> +    maxItems: 1

Not an array, so drop.

> +
> +  clocks:
> +    description: Phandle and clock identifier for sampling clock

Same comment on descriptions.

> +    maxItems: 1
> +
> +  interrupts:
> +    description: IRQ line of the ADC
> +    maxItems: 1
> +
> +  microchip,device-addr:
> +    description: Device address when multiple MCP3911 chips are present on the same SPI bus.
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32
> +      - enum: [0, 1, 2, 3]
> +      - default: 0
> +
> +  vref-supply:
> +    description: Phandle to the external reference voltage supply.
> +    maxItems: 1

Drop this *-supply is always 1 item.

> +
> +required:
> +  - compatible
> +  - reg
> +
> +examples:
> +  - |
> +    spi {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      adc@0 {
> +        compatible = "microchip,mcp3911";
> +        reg = <0>;
> +        interrupt-parent = <&gpio5>;
> +        interrupts = <15 2>;
> +        spi-max-frequency = <20000000>;
> +        microchip,device-addr = <0>;
> +        vref-supply = <&vref_reg>;
> +        clocks = <&xtal>;
> +      };
> +    };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index e51a68bf8ca8..fbccc9d450ff 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -10723,7 +10723,7 @@ M:	Kent Gustavsson <kent@xxxxxxxxxx>
>  L:	linux-iio@xxxxxxxxxxxxxxx
>  S:	Supported
>  F:	drivers/iio/adc/mcp3911.c
> -F:	Documentation/devicetree/bindings/iio/adc/mcp3911.txt
> +F:	Documentation/devicetree/bindings/iio/adc/microchip,mcp3911.yaml
>  
>  MICROCHIP NAND DRIVER
>  M:	Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
> -- 
> 2.23.0
>