Re: [PATCH v3 1/2] PCI: Introduce pcie_wait_for_link_delay()

[Rafael J. Wysocki]

On Thursday, November 7, 2019 1:18:46 PM CET Mika Westerberg wrote:
> This is otherwise similar to pcie_wait_for_link() but allows passing
> custom activation delay in milliseconds.
> 
> Signed-off-by: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>

No issues found:

Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@xxxxxxxxx>

> ---
>  drivers/pci/pci.c | 21 ++++++++++++++++++---
>  1 file changed, 18 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index ecc775793c3c..7083adc07f5c 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -4588,14 +4588,17 @@ static int pci_pm_reset(struct pci_dev *dev, int probe)
>  
>  	return pci_dev_wait(dev, "PM D3hot->D0", PCIE_RESET_READY_POLL_MS);
>  }
> +
>  /**
> - * pcie_wait_for_link - Wait until link is active or inactive
> + * pcie_wait_for_link_delay - Wait until link is active or inactive
>   * @pdev: Bridge device
>   * @active: waiting for active or inactive?
> + * @delay: Delay to wait after link has become active (in ms)
>   *
>   * Use this to wait till link becomes active or inactive.
>   */
> -bool pcie_wait_for_link(struct pci_dev *pdev, bool active)
> +static bool pcie_wait_for_link_delay(struct pci_dev *pdev, bool active,
> +				     int delay)
>  {
>  	int timeout = 1000;
>  	bool ret;
> @@ -4632,13 +4635,25 @@ bool pcie_wait_for_link(struct pci_dev *pdev, bool active)
>  		timeout -= 10;
>  	}
>  	if (active && ret)
> -		msleep(100);
> +		msleep(delay);
>  	else if (ret != active)
>  		pci_info(pdev, "Data Link Layer Link Active not %s in 1000 msec\n",
>  			active ? "set" : "cleared");
>  	return ret == active;
>  }
>  
> +/**
> + * pcie_wait_for_link - Wait until link is active or inactive
> + * @pdev: Bridge device
> + * @active: waiting for active or inactive?
> + *
> + * Use this to wait till link becomes active or inactive.
> + */
> +bool pcie_wait_for_link(struct pci_dev *pdev, bool active)
> +{
> +	return pcie_wait_for_link_delay(pdev, active, 100);
> +}
> +
>  void pci_reset_secondary_bus(struct pci_dev *dev)
>  {
>  	u16 ctrl;
>